u-boot.git - U-Boot bootloader

Age	Commit message (Expand)	Author
2018-02-04	Merge git://git.denx.de/u-boot-dm	Tom Rini
2018-02-04	Merge git://git.denx.de/u-boot-imx	Tom Rini
2018-02-04	imx: mx7: run sec_init for CAAM RNG	Bryan O'Donoghue
2018-02-04	drivers/crypto/fsl: assign job-rings to non-TrustZone	Bryan O'Donoghue
2018-02-04	i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro	Eran Matityahu
2018-02-04	iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()	Eran Matityahu
2018-02-04	doc: mxc_hab: Improve the config option list	Fabio Estevam
2018-02-04	arm: dts: imx6ull: move input include to base device tree	Stefan Agner
2018-02-04	mx6sabresd: Add fastboot support	Fabio Estevam
2018-02-04	mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE	Fabio Estevam
2018-02-04	mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE	Fabio Estevam
2018-02-04	board: tbs2910: add private imx config	Soeren Moch
2018-02-04	imx: mx25: Remove SION bit in all pin-mux that are safe	Michael Trimarchi
2018-02-04	imx: mx7dsabresd: enable UHS and HS200	Peng Fan
2018-02-04	mmc: fsl_esdhc: support SDR104 and HS200	Peng Fan
2018-02-04	ARM: dts: add pinmux and tuning settings for HS200/SDR104	Peng Fan
2018-02-04	mmc: fsl_esdhc: add strobe and tuning entry	Peng Fan
2018-02-04	mx6memcal: fix comment in board header file	Eric Nelson
2018-02-04	mx6memcal: enable SDP support	Eric Nelson
2018-02-04	mx6memcal: launder through savedefconfig	Eric Nelson
2018-02-04	arm: imx: mx53loco: remove usage of mx53_dram_size	Patrick Bruenn
2018-02-04	arm: imx: m53evk: remove usage of mx53_dram_size	Patrick Bruenn
2018-02-04	arm: imx: cx9020: move dram init into common place	Patrick Bruenn
2018-02-04	arm: imx: cx9020: remove usage of mx53_dram_size	Patrick Bruenn
2018-02-04	board,ge,bx50v3 - rtc time validation	Nandor Han
2018-02-04	configs: ge_bx50v3: automatic partition selection and video output failure me...	Ian Ray
2018-02-04	board: ge: bx50v3: mount rootfs read-only	Hannu Lounento
2018-02-04	configs: ge_bx50v3: enable bootcount	Ian Ray
2018-02-04	config: ge_bx50v3: read boot script	Ian Ray
2018-02-04	board: ge: bx50v3: Support FIT and select configuration based on VPD	Ian Ray
2018-02-04	board: ge: bx50v3: Enable hardware watchdog	Martyn Welch
2018-02-04	board: ge: bx50v3: program MAC address to I210	Hannu Lounento
2018-02-04	board: ge: bx50v3: move FEC MAC address programming to driver	Martyn Welch
2018-02-04	configs: Add network device support for bx50v3 products	Ian Ray
2018-02-04	board: ge: Enable access to i2c bus 1 and 2	Martyn Welch
2018-02-04	rtc: adding RX8010SJ rtc driver	Nandor Han
2018-02-04	net: e1000: implement eth_write_hwaddr	Hannu Lounento
2018-02-04	net: e1000: split e1000_read_mac_addr	Hannu Lounento
2018-02-04	net: e1000: add support for writing to EEPROM	Hannu Lounento
2018-02-04	imx: mx8m: add ddr controller memory map	Peng Fan
2018-02-04	power: pmic/regulator allow dm be omitted by SPL	Peng Fan
2018-02-04	imx: imx8mq: add dtsi file	Peng Fan
2018-02-04	net: fec: fix build warnings for 64bits support	Ye Li
2018-02-04	net: fec: do not access reserved register for i.MX8M	Peng Fan
2018-02-04	gpio: mxc: add i.MX8M support	Peng Fan
2018-02-04	imx: lcdif: include i.MX8M	Peng Fan
2018-02-04	mmc: fsl_esdhc: support i.MX8M	Peng Fan
2018-02-04	misc: ocotp: add i.MX8M support	Peng Fan
2018-02-04	imx: makefile: compile files for i.MX8M	Peng Fan
2018-02-04	imx: mx8m: add soc related settings and files	Peng Fan