aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-09arm: mx5: Enable WDT and bootcounter on M53MenloMarek Vasut
Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2019-01-09ARM: vf610: ddrmc: do not write CR79 by defaultStefan Agner
The current value CTLUPD_AREF(0) is the reset value of the register, so there is no need to write a value. If needed, the register can be written using board specific CR settings. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09ARM: vf610: ddrmc: fix initialization completion detectionStefan Agner
The CR80 register has multiple interrupt bits, the code is supposed to check bit 8 but instead uses a logical and. In most cases this probably did not affect real operations since at that stage typically none of the other bits are set. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-09ARM: vf610: ddrmc: fix CR138 preprocessor defineStefan Agner
According to the data sheet bits 10-8 are PHYDRAM_CK_EN. Fix mask to allow setting PHYDRAM_CK_EN correctly. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09toradex: colibri_vf: fix memory initializationStefan Agner
Commit 3f353ceccbbb ("vf610: refactor DDRMC code") changed on-die termination (ODT) values from 120 Ohm to 60 Ohm and enabled a static read/write leveling which has not been tested with this board. This commit reverts both changes and makes sure that memory gets initialized as it has been done before the mentioned commit. Fixes: 3f353ceccbbb ("vf610: refactor DDRMC code") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-01-09ARM: vf610: ddrmc: program Dummy DDRBYTE1/2Stefan Agner
The Vybrid reference manual VFXXXRM Rev. 0 10/2016 states in chapter 5.2.6.1 DUMMY PADS (DDR/QuadSPI) that those pads need to be programed for correct operation of DDR. Assume the default DDR pin configuration which seems to work well on a Colibri VF50. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-09board: toradex: colibri_vf: unset NFS and LOADS/BStefan Agner
Safe some space by not selecting CMD_NFS and CMD_LOADS/B. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09usb: xhci-mem: Fix scratchpad array issueYe Li
After updating the value of dev_context_ptrs[0], we should flush this from cache to memory. Otherwise the xhci controller won't use it. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-01-09gpio: stm32f7: Fix SPL code sizePatrice Chotard
In order to keep SPL code size below the 32Kb limit, put under CONFIG_SPL_BUILD flag all unused code in SPL. This is needed for stm32f7xx board which are using SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-09gpio: stm32f7: Fix gpio bank hole managementPatrice Chotard
In case "gpio-ranges" property is not present in device tree, use default value for gpio_count and gpio_range. This fixes an issue on stm32 F7 and H7 boards where "pinmux status -a" command didn't return any pin status due to the fact that both stm32 F7 and H7 board DT doesn't use the gpio-ranges property. Fixes: dbf928dd2634a6("gpio: stm32f7: Add gpio bank holes management") Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-09env: sata: Fix saveenv issueYe Li
Wrong env buffer was passed into sata write function, cause the saveenv not work. Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-09arm: ti: boot: Remove legacy Android partitionsSam Protsenko
Remove unused Android partitions: - efs, crypto, cache: we don't use it anymore (images are not built in AOSP - ipu1, ipu2: IPU firmware is now a part of vendor image and doesn't reside as a separate partition While at it, rename "reserved" partition to "uboot-env", as it's actually stores U-Boot environment. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
2019-01-09env: sata: Add missed env location for SATA bootYe Li
The env location label ENVL_ESATA is missed in location tables, so when we configure the ENV in SATA, u-boot fails to get correct env location and cause boot hang in board_f. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-09arm: Round the dma_alloc_coherent memory size to cache line alignedYe Li
When running usb dwc3 gadget driver, we meet random USB enumeration failure in fastboot. The root cause is a cache coherence issue. When it happens, the ctrl_req in gadget driver is allocated at 0xfe932f40, and the usb_composite_dev (cdev) is allocated at 0xfe932f60. So after we submit the setup request (cache flushed) to USB controller, any accessing to usb_composite_dev variable will cause the cache line refill, then when setup transfer is completed, reading the setup data in ctrl_req will gets old value from cache not from memory. The ctrl_req is allocated by API dma_alloc_coherent, but u-boot don't have cohernet memory. so it still needs cache maintain operations before/after HW accessing. Since the cache flush or invalidate bases on cache line, so when the allocated memory size is not cache line aligned, potentially it may meet such issue. This patch modifies the dma_alloc_coherent API to round the size to cache line aligned. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-09doc: README.commands: fix typeHeinrich Schuchardt
%s/commmand/command/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09dm: video: lcd: MIGRATION: Add migration plan for videoSimon Glass
Add a migration plan for video which is an important subsystem in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-09dm: pci: MIGRATION: Add migration plan for PCISimon Glass
Add a migration plan for PCI which is an important subsystem in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-09igep003x: MAINTAINER: Remove myself as maintainer and add JavierEnric Balletbo i Serra
I can't continue maintaining the board because I don't have access to the hardware anymore, so remove myself from the entry and add Javier who has volunteered to help and maintain the board. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Javier Martínez Canillas <javier@dowhile0.org>
2019-01-09Add a github template telling people to not use pull requests thereTom Rini
On our mirror account on github we have gotten a handful of pull requests. At this time github does not allow you to disable pull requests on a project. The generally suggested work-around is to add a pull request template that tells people to not use that workflow. Add one here that points to the wiki page on submitted patches. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-09mmc: bring back partition init for non-DM MMC driversAndre Przywara
Commit d0851c893706 ("blk: Call part_init() in the post_probe() method") removed the call to part_init() in mmc.c, as this is done by the DM_MMC framework. However Allwinner is (still) relying on a non-DM MMC driver, so we are now missing the implicit partition init, leading to failing MMC accesses due to the missing partition information. Bring the call back just for non-DM MMC driver to fix this regression. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Soeren Moch <smoch@web.de>
2019-01-09sunxi: drop default SPL_LIBDISK_SUPPORT enablementAndre Przywara
There is no code for using partition labels in the Allwinner SPL port. Even so the name is slightly misleading, CONFIG_SPL_LIBDISK_SUPPORT was meant to guard partition code for the SPL. Remove the "imply" line in the Kconfig to make this obvious and avoid unneeded code inclusions, helping to keep the H6 SPL code small. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-08Makefile: Correct logic for DM_SCSI + unconverted drivers checkTom Rini
When checking for boards that are enabling a SATA driver that isn't converted to DM yet we need to be sure to not also trip over boards that do set CONFIG_DM_SCSI by itself, as that is not a bug. Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Fixes: ea9d7c17fc4c ("dm: MIGRATION: Add migration plan for CONFIG_SATA") Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-07Prepare v2019.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-06Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2019-01-06Merge tag 'for-master-20190106' of git://git.denx.de/u-boot-rockchipTom Rini
Fixes: - rockchip: rk3399: fix missing braces in full pinctrl
2019-01-06rockchip: rk3399: fix missing braces in full pinctrlPhilipp Tomsich
Braces around the error-case for rk3399_pinctrl_set_pin_pupd lead to an unconditional (and unintended) return from the function without it ever setting pin-configurations. Fix it. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-04exynos: Leave the compiler to choose the register to avoid possible r0 ↵Guillaume GARDET
corruption Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-01-03Merge tag 'for-v2019.01' of git://git.denx.de/u-boot-videoTom Rini
TrueType fixes and documentation
2019-01-03Merge tag 'for-master-20190103' of git://git.denx.de/u-boot-rockchipTom Rini
Last-minute fixes for 2019.1: - clamp DRAM size to below 32bit for 32bit targets to support 4GB - fix copyright notice on some Rockchip-contributed files - adjust vdd_log for the RK3399-Q7 to improve stability in some workloads
2019-01-03exynos: allow SPL to build in thumb modeGuillaume GARDET
Building peach-pi smdk5420 and peach-pit with thumb mode for SPL ends-up in the following error: Error: Thumb encoding does not support an immediate here -- `msr cpsr_c,#0x13|0xC0' Use an intermediate register to be able to use thumb for exynos5 SPL. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-01-02rockchip: rk3399-puma: Set VDD_LOG to 950 mV.Christoph Muellner
This patch sets VDD_LOG to 950 mV on RK3399-Q7. This is required to address stability issues on Puma in heavy-load use-cases. Reported-by: Assaf Agmon <assaf@r-go.io> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.Christoph Muellner
This patch enables the full pinctrl driver in the defconfig for the RK3399-Q7. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399: Add Kconfig option for full pinctrl driverChristoph Muellner
This patch adds a Kconfig option to enable the full pinctrl driver for the RK3399. This flag needs to be enabed in order to get the features of the full pinctrl driver compiled in (i.e. a .set_state() callback). Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399: Add improved pinctrl driver.Christoph Muellner
The current pinctrl driver for the RK3399 has a range of qulity issues. E.g. it only implements the .set_state_simple() callback, it does not parse the available pinctrl information from the DTS (instead uses hardcoded values), is not flexible enough to cover devices without 'interrupt' field in the DTS (e.g. PWM), is not written generic enough to make code reusable among other rockchip SoCs... This patch addresses these issues by reimplementing the whole driver from scratch using the .set_state() callback. The new implementation covers all featurese of the old code (i.e. it supports pinmuxing and pullup/pulldown configuration). This patch has been tested on a RK3399-Q7 SoM (Puma). Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02dm: pinctrl: Add pinctrl_decode_pin_config_dm().Christoph Muellner
pinctrl_decode_pin_config_dm() is basically a feature-equivalent implementation of pinctrl_decode_pin_config(), which operates on struct udevice devices and uses the dev_read_*() API. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.Christoph Muellner
This patch enables the PWM regulator driver in the defconfig for the RK3399-Q7. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02power: regulator: Allow PWM regulator to be omitted from SPL.Christoph Muellner
This patch allows to enable the PWM regulator driver independent for U-Boot and SPL. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.Christoph Muellner
This patch eliminates the non-standard entries "rockchip,pwm_id" and "rockchip,pwm_voltage". They are neither documented nor read out by any driver. Additionally it introduces the entry regulator-init-microvolt and sets it to 900 mV, which is the default target value for VDD_LOG. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: ram: update license for sdram driverKever Yang
Rockchip may use this sdram copy of source code for both open source and internal project, update the license to use both GPL2.0+ and BSD-3 Clause. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3036: ram: update licenseKever Yang
All the source code of sdram_rk3036.c are from Rockchip, update the copyright to owned by Rockchip. Because rockchip may use this copy of code both for open source project and internal project, update the license to use both GPL2.0+ and BSD-3 Clause. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: sdram-common: fix wrong size for 4GB in 32bit SoCKever Yang
This is workaround for issue we can't get correct size for 4GB ram in 32bit system and available before we really need ram space out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram). The size of 4GB is '0x1 00000000', and this value will be truncated to 0 in 32bit system, and system can not get correct ram size. Rockchip SoCs reserve a blob of space for peripheral near 4GB, and we are now setting SDRAM_MAX_SIZE as max available space for ram in 4GB, so we can use this directly to workaround the issue. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2019-01-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2019-01-01Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-01-02dm: MIGRATION: Update migration plan for DM_SPI_FLASHJagan Teki
Migration plan for DM_SPI_FLASH is v2019.07 since it depends on DM_SPI migration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-02dm: MIGRATION: Update migration plan for SPIJagan Teki
- v2019.04 for no dm conversion drivers - v2019.07 for partially converted drivers. Note: there were many updates on this deadline, so better not update this again. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-02mtd: nand: raw: Add Hynix H27UBG8T2BTR id tableNikolai Zhubr
This patch adds Hynix H27UBG8T2BTR id table as part of raw nand, these chips were available in some A20-olinuxino-micro boards. Signed-off-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> [jagan: add proper commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-02spi: sun4i: Add rx_buf NULL pointer checkStefan Mavrodiev
Current driver doesn't check if the destination pointer is NULL. This cause the data from the FIFO to be stored inside the internal SDRAM ( address 0 ). The patch add simple check if the destination pointer is NULL. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Jagan Teki <jagan@openedev.com> [jagan: fix commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01pico-imx7d: Increase the CONFIG_ENV_OFFSET sizeFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:52:22 +0000