| Age | Commit message (Collapse) | Author |
|---|
|
When running 'mkimage -l' is called for a valid StarFive file an error
message "Error: invalid marker bytes" is written by the Renesas SPKG
driver.
mkimage -l may be invoked without specifying an image type. In this case
mkimage iterates over all image type drivers to find the one that matches.
None of the non-matching drivers should write an error message.
Fix the Renesas SPKG driver.
Fixes: afdfcb11f97c ("tools: spkgimage: add Renesas SPKG format")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
SCSI device scan code was executing TEST UNIT READY command without
explicitly setting dma direction in struct scsi_cmd to NONE, so command
was passed to driver with dma direction set to DMA_FROM_DEVICE,
inherited from older usage.
With WDC SDINDDH6-64G ufs device, that caused TEST UNIT READY to
return error.
Fix that, by explicitly setting dma direction to NONE for
TEST UNIT READY, and restoring it back DMA_FROM_DEVICE for the
following READ CAPACITY.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-sh
|
|
- Revert HAFDBS changes, correct spl_imx_romapi for eMMC, fix the virtio
rng in one case, fix bootstd in one case, and correct a Kconfig
description.
|
|
This reverts commit 6cdf6b7a340db4ddd008516181de7e08e3f8c213. This is
part of a series trying to make use of the arm64 hardware features for
tracking dirty pages. Unfortunately this series causes problems for the
AC5/AC5X SoCs. Having exhausted other options the consensus seems to be
reverting this series is the best course of action.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
|
|
present"
This reverts commit 836b8d4b205d2175b57cb9ef271e638b0c116e89. This is
part of a series trying to make use of the arm64 hardware features for
tracking dirty pages. Unfortunately this series causes problems for the
AC5/AC5X SoCs. Having exhausted other options the consensus seems to be
reverting this series is the best course of action.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
|
|
This reverts commit c1da6fdb5c239b432440721772d993e63cfdeb20. This is
part of a series trying to make use of the arm64 hardware features for
tracking dirty pages. Unfortunately this series causes problems for the
AC5/AC5X SoCs. Having exhausted other options the consensus seems to be
reverting this series is the best course of action.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
|
|
This fixes a regression in the eMMC fast boot mode case where the buffer
was missing 464 bytes.
The code figures out how many bytes must at least be fetched to honor
the current read, rounds that up to the ss->pagesize [which is a no-op
in the USB download case because that has ->pagesize==1], fetches that
many bytes, but then recorded the original upper bound as the new end of
the valid data. However, this did not take into account the rounding up
to the ss->pagesize. Fix this by recording the actual bytes downloaded.
Fixes: 4b4472438f5a ("imx: spl_imx_romapi: avoid tricky use of spl_load_simple_fit() to get full FIT size")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
Fix comment about Stream(USB) download failure.
Fixes: 1cbebc786276 ("imx: add rom api support")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
This config option enables the malloc() pool in TPL not the SPL. Fix
the description to accurately reflect this.
Fixes: fd8497dae54 (spl: Create proper symbols for enabling the malloc() pool)
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
According to the virtio v1.x "entropy device" specification, a virtio-rng
device is supposed to always return at least one byte of entropy.
However the virtio v0.9 spec does not mention such a requirement.
The Arm Fixed Virtual Platform (FVP) implementation of virtio-rng always
returns 8 bytes less of entropy than requested. If 8 bytes or less are
requested, it will return 0 bytes.
This behaviour makes U-Boot's virtio_rng_read() implementation go into an
endless loop, hanging the system.
Work around this problem by always requesting 8 bytes more than needed,
but only if a previous call to virtqueue_get_buf() returned 0 bytes.
This should never trigger on a v1.x spec compliant implementation, but
fixes the hang on the Arm FVP.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Peter Hoyes <peter.hoyes@arm.com>
|
|
EFI applications can be very large and thus used to cause boot failures
when malloc() space was exhausted.
A recent changed fixed this by using the kernel_addr_r environment var
as the address of the buffer. However, it still frees the buffer when
the bootflow is discarded.
Fix this by introducing a flag to indicate whether the buffer was
allocated, or not.
Note that kernel_addr_r is not the last word here. It might be better
to use lmb to place images. But there is a lot of refactoring to do
before we can remove the environment variables. The distro scripts rely
on them so it is safe for bootstd to do so too.
Fixes: 6a8c2f9781c bootstd: Avoid allocating memory for the EFI file
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported by: Simon Glass <sjg@chromium.org>
Reported by: Shantur Rathore <i@shantur.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Shantur Rathore <i@shantur.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dm
patman correct import of u_boot_pylib
correct long-standing EFI framebuffer bug
minor test refactor
|
|
Correct this typo in the warning message shown when no more bootstage
records can be added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
After opening pathname, we must close ifd once we are done with it.
Fixes: b9274095c2c ("sandbox: Add a way to map a file into memory")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
CONFIG_DM_WARN has a text indicating that these messages should only
provided when debugging. This implies that the setting must be default no.
We should still create debug messages.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The importlib_resources import is not actually used. Fix this so that
patman can run on Python 3.6 to some extent, once
'pip3 install importlib-resources' has been run.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Import this only when it is needed, since it is not present when
installed via 'pip install'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/26
|
|
Tidy up the code a little to reduce the number of pylint warnings.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a new run_patman() function to hold the main logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Move this code into a separate cmdline module, as is done with the
other tools.
Use the same HAS_TESTS check as buildman
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use the correct background colour when using white-on-black.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Return an error when the user does not select an OS, so we know whether
to boot or not.
Move calling of bootflow_menu_run() into a separate function so we can
call it from other places.
Expand the test to cover these cases.
Add some documentation also, while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Adjust scan_mmc4_bootdev() and related function so that the caller can
do its own 'bootflow scan' command. This allows it to change the flags
if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The efi_gop driver uses private fields from the video uclass to obtain a
pointer to the frame buffer. Use the platform data instead.
Check the VIDEO_COPY setting to determine which frame buffer to use. Once
the next stage is running (and making use of U-Boot's EFI boot services)
U-Boot does not handle copying from priv->fb to the hardware framebuffer,
so we must allow EFI to write directly to the hardware framebuffer.
We could provide a function to read this, but it seems better to just
document how it works. The original change ignored an explicit comment
in the video.h file ("Things that are private to the uclass: don't use
these in the driver") which is why this was missed when the VIDEO_COPY
feature was added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 8f661a5b662 ("efi_loader: gop: Expose fb when 32bpp")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Currently the renesas_sdhi_reset_tuning() unconditionally leaves SDHI
clock enabled after the tuning reset. This is not always necessary.
After the driver performed tuning reset at the end of probe function,
or in the unlikely case that tuning failed during regular operation,
the SDHI clock can be disabled after the tuning reset. The following
set_ios call would reconfigure the clock as needed.
In case of regular set_ios call which requires a tuning reset, keep
the clock enabled or disabled according to the mmc->clk_disable state.
With this in place, the controllers which have not been accessed via
block subsystem after boot are left in quiescent state. However, if an
MMC device is used e.g. for environment storage, that controller would
be accessed during the environment load and left active, including its
clock which would still be generated. This is due to the design of the
MMC subsystem, which does not deinit a controller after it was started
once, the controller is only deinited in case of mmc rescan, or before
OS boot.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Thuan Nguyen Hong <thuan.nguyen-hong@banvien.com.vn>
|
|
To quote Andre:
The first few patches are some easy refactorings and fixes, most of them
actually don't change the generated binaries at all. Then there is a
defconfig for a new board, for which we just gained the .dts file from
the last kernel DT sync.
On top there is support for a new PMIC (AXP313), and LPDDR4 support for
the Allwinner H616 SoC, both of which are needed to support new devices
that appeared lately, especially cheap TV boxes.
While those are technically new features, they don't affect existing
boards, for instance the LPDDR4 support code is guarded by a new DRAM
type Kconfig variable. So the risk for regressions is very slim.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
|
|
The H616 SoC family has support for several types of DRAM: DDR3,
LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 and LPDDR3 memory.
Let's extend the driver to support the LPDDR4 memory. This type
of memory widely used in device with T507(-H) SoC and new orangepi
zero3 with H618.
The compatibility with T507 is not yet complete, because there
is difference in the phy_init array.
The LPDDR4-2133 timings correspond to DRAM Rayson RS1G32LO4D2BDS-53BT
found on the NOR SPI from the Orangepi Zero 3 4GB.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
|
|
The original H616 DDR3 ODT configuration code wrote board specific values
into a sequence of paired registers.
For LPDDR3 support we needed to special-case one group of registers,
because for that DRAM type we need to write 0 into the lower register of
each pair. That already made the code less readable.
LPDDR4 support will make things even messier, so let's refactor that
code now: We allow to write different values into the lower and upper
half of each pair. The masking is moved into a macro, and use in each
write statement.
The effect is not as obvious yet, as we don't need the full flexibility at
the moment, but the motivation will become clearer with LPDDR4 support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Mikhail Kalashnikov <iuncuim@gmail.com>
|
|
The X-Powers AXP313a is a small PMIC with just three buck converters and
three LDOs, one of which is actually fixed (so not modelled here).
Add the compatible string and the respective regulator ranges to allow
drivers to adjust voltages.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
On boards using the AXP313 PMIC, the DRAM rail is often not setup
correctly at reset time, so we have to program the PMIC very early in
the SPL, before running the DRAM initialisation.
Add a simple AXP313 PMIC driver that knows about DCDC2(CPU) and
DCDC3(DRAM), so that we can bump up the voltage before the DRAM init.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Add board support for ICnova A20 SomPi compute module on
ICnova ADB4006 development board.
Specification:
SoM
- Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz
- 512MB DDR3 RAM
- Fast Ethernet (Phy: Realtek RTL8201CP)
ADB4006
- I2C
- 2x USB 2.0
- 1x Fast Ethernet port
- 1x SATA
- 2x buttons (PWRON, Boot)
- 2x LEDS
- serial console
- HDMI
- µSD-Card slot
- Audio Line-In / Line-Out
- GPIO pinheaders
https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006
https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
devicetree upstreamed with linux 6.5
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
sunxi platforms put .bss in DRAM, so .bss is not available in SPL before
DRAM controller initialization. Therefore, this buffer must be placed in
the .data section.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
commit 95168d77d391 ("sunxi: add Allwinner R528/T113 SoC support") added
the new entry out of order.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
CONFIG_ARCH_SUNXI will not be enabled for RISC-V SoCs using this driver.
Use the symbol for the driver itself instead.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
The MMC controller driver is (and ought to be) the only user of these
register definitions. Put them in a header next to the driver to remove
the dependency on a specific ARM platform's headers.
Due to the sunxi_mmc_init() prototype, the file was not renamed. None of
the register definitions were changed.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
DM_GPIO is always enable in U-Boot proper for ARCH_SUNXI, and this
driver is never enabled in SPL, so the condition is always true.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
When building this with clang, we get a warning about having excess
parenthesis here, or that we're incorrectly using "==" when we want "=".
Correct these by using the common size macro.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Andre: Use SZ_512M as per Simon's suggestion]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
|
So far we have a convoluted #ifdef mesh that guards the early AXP PMIC
setup in board.c. That combination of &&, || and negations is very hard
to read, maintain and especially to extend.
Fortunately we have those same conditions already modelled in the
Kconfig file, so they are actually redundant. On top of that the real
reason we have those preprocessor guards in the first place is about the
symbols that are *conditionally* defined: without #ifdefs the build
would break because of them being undefined for many boards.
To simplify this, just change the guards to actually look at the symbols
needed, so CONFIG_AXP_xxx_VOLT instead of CONFIG_AXPyyy_POWER.
This drastically improves the readability of this code, and makes adding
PMIC support a pure Kconfig matter.
Doing this revealed one bug in Kconfig: there is no axp_set_dcdc4() for
the AXP818, even though CONFIG_AXP_DCDC4_VOLT includes that PMIC.
Since the AXP818 wasn't included when calling axp_set_dcdc4() in board.c,
this wasn't an issue, but becomes one now, so also remove the AXP818 from
the DCDC4 Kconfig symbol.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Documentation:
* hikey960: update link URLs
* j7200_evm: Fix OPTEE platform name
* ti: fix style of examples
* fix typos
|
|
%s/form/from/
Fixes: d46bee8c2d24 ("doc: qfw man-page")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Use prompt instead of code-block to have copy-paste friendly command
documentation.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The sphinx-prompt documentation[0] provides examples on how we can use
prompt as a parameter to simplify the description. Use the same.
While at it, ensure to make all relevant prompts clarified such as gdb
prompts.
[0] http://sbrunner.github.io/sphinx-prompt/
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Signed-off-by: Milan P. Stanić <mps@arvanta.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
k3-j7200 does not exist in upstream OPTEE. Use j721e as the platform
name. Using k3-j7200 as OPTEE name results in broken boot due to wrong
configuration being picked.
Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The build instructions for the hikey960 had some broken links. Update
the links to use new vendor URLs. Also change build instructions to
reference a different file name.
Signed-off-by: Dylan Corrales <deathcamel58@gmail.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
To quote the author:
Since commit [1], Ethernet is broken on TI AM62 and AM64 platforms.
The commit [1] is not the culprit. It just unearths the problem by fixing
the error check in k3-udma.c. This issue was silently being ignored earlier
due to wrong error check. [NULL instead of FDT_ADDR_T_NONE].
Fix the issue by adding the necessary register spaces for the u-boot K3-UDMA
driver for AM62 and AM64 platforms.
These properties will eventually make it into the SoC DTSi files [2] after
which these can be dropped from k3-*-u-boot.dtsi files.
[1] - 5fecea171de3dd ("treewide: use dev_read_addr_*_ptr() where appropriate")
[2] - https://lore.kernel.org/linux-arm-kernel/20230810174356.3322583-1-vigneshr@ti.com/
|
