aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-04at91rm9200: move serial shutdown code to serial driversJean-Christophe PLAGNIOL-VILLARD
introduce serial_exit for this purpose. Use it only when the rm9200 serial driver is active Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04at91rm9200: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD
add CONFIG_AT91RM9200_USART to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04Add support for the AT91RM9200EK Board.Ulf Samuelsson
The AT91RM9200-EK Evaluation Board supports the AT91RM9200 ARM9-based 32-bit RISC microcontroller and enables real-time code development and evaluation. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507 with - NOR (cfi driver) - DataFlash - USB OHCI - Net - I2C (hard) Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04add dataflash mmc mux missing supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04at91rm9200dk: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECTJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04at91sam9: add watchdog supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04at91sam9/at91cap: spi init add hardware chip select supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04MPC8260ADS: Define CONFIG_HAS_ETH0.Scott Wood
This is required so that the MAC address will be updated in the device tree. Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04PQ2FADS: Enable PCI.Scott Wood
PCI on PQ2FADS is very similar to PCI on MPC8272ADS. Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04Fix quoting bug introduced by commit 74de7aefWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-04Fix implicit declaration of function 'htons'Wolfgang Denk
Include <netinet/in.h> instead of <linux/in.h> to get htons() prototpye. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-04Fix building of env_embedded.oWolfgang Denk
Since commit a706bfc7 common/env_embedded.o and tools/envcrc were only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks building for many boards. We always have to build these files when CONFIG_ENV_IS_IN_FLASH is set. Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-04rename include/zlib.h to include/u-boot/zlib.hJean-Christophe PLAGNIOL-VILLARD
Some systems have zlib.h installed in /usr/include/. This isn't the desired file for u-boot code - we want the one in include/zlib.h. This rename will avoid the conflict. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-04tools/Makefile: fix image.c dependancy locationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-04tools: add ncb to gitignoreMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-04include/ns16550.h: Unify structure declaration for registersDetlev Zundel
Instead of special casing the different access patterns, use common code with light macros sprinkled in to accomodate for the different layouts of the register structure. Note that this also changes the types of the registers for the "positively packed (>1)" cases. As the registers truly are unsigned chars, this is surely the Right Thing, but it is a semantic change. Note that for this case depending on the endianness on the bus, we may see a change of behaviour. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-04-04Delete now unused tools/Makefile.win32Peter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04Add support for building native win32 toolsPeter Tyser
Add support for compiling the host tools in the tools directory using the MinGW toolchain. This produces executables which can be used on standard Windows computers without requiring cygwin. One must specify the MinGW compiler and strip utilities as if they were the host toolchain in order to build win32 executables, eg: make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generationPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Create generic build rulesPeter Tyser
Create a few generic build rules to replace the current method which has 1 build target for each file Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Use auto-generated object file dependenciesPeter Tyser
Files in the SRCS variable have their dependencies automatically generated so remove duplicate explicit dependencies Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Remove symlinks for remaining source filesPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Dynamically generate libfdt object dependenciesPeter Tyser
Add the libfdt files to the SRCS variable so that they have their dependencies automatically generated Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Remove symlinks for fdt targetsPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Add libfdt/ to the include search pathPeter Tyser
This change makes the process of symlinking libfdt_internal.h unnecessary Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools: Remove unecessary symlinking of zlib.hPeter Tyser
crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink was previously necessary to give U-Boot's version of zlib.h precedence over the host computer's version of zlib.h. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Add tools/ to the include search pathPeter Tyser
This change makes the process of symlinking mkimage.h and fdt_host.h unnecessary Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Compile ncb when CONFIG_NETCONSOLEPeter Tyser
Also conditionally add ncb.o to OBJ_FILES list Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NETPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDEDPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IPPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMGPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADSPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabledPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Split variable declarations into multiple linesPeter Tyser
Split variable declarations into multiple lines and use the standard VAR-y convention. Also move object and binary variable declarations to after config.mk has been included to allow for these lists to utilize the CONFIG_XXX variables. These changes lay the groundwork for conditional compilation of files in the tools directory. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Remove inappropriate double-tabsPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04tools/Makefile: Remove HOSTARCH HOSTOS definesPeter Tyser
The values of HOSTARCH and HOSTOS which are exported from the top-level Makefile should be used Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04gen_eth_addr: Use POSIX rand() and srand()Peter Tyser
Replace random()/srandom() use with rand()/srand() to support compilation with the mingw toolchain. The rand()/srand() functions are generally more common and are functionally equivalent to the original random()/srandom() calls. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04elf.h: Use stdint.h to provide standard typedefs for WIN32Peter Tyser
The original code provided an incomplete set of typedefs for WIN32 compiles and replicated the standard typedefs that are already provided by stdint.h Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04common/Makefile: Conditionally compile env_embedded.oPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04Makefile: Add removal of *.exe files to clean targetPeter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04Makefile: Make autoconf.mk a dependency of the depend targetPeter Tyser
The original code did not generate autoconf.mk until after some targets dependencies had already been calculated, for example the directories in the SUBDIRS variable Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-03mflash: Initial mflash supportunsik Kim
Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
2009-04-03Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2009-04-03Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2009-04-03Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2009-04-03Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk
2009-04-03Rename common ns16550 constants with UART_ prefix to prevent conflictsDetlev Zundel
Fix problems introduced in commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware diagnosis functions for inka4x0] which redefined MSR_RI which is already used on PowerPC systems. Also eliminate redundant definitions in ps2mult.h. More cleanup will be needed for other redundant occurrences though. Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-04-03Noisily disable the legacy NAND subsystem.Scott Wood
Legacy NAND is marked for feature removal after April 2009 (i.e. this upcoming release). There are still several boards that reference it (though many do so only for disk-on-chip support which has been silently disabled for a while now). These boards will now fail to build with #error, though the code is still there if the user removes #error. The plan is to remove the code outright in the next release, along with any board code that refers to it (such as board/esd/common/auto_update.c). Also, remove the legacy NAND API description from README.nand. Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 23:41:04 +0000