aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-11-03Fix a typo in cpu/mpc824x/interrupts.cGuennadi Liakhovetski
Since December 2003 the timer_interrupt_cpu() function in cpu/mpc824x/interrupts.c contains what seems to be a superfluous parameter. Remove it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2007-11-03add ft_cpu_setup(..) on mpc8260Sergej Stepanov
Add ft_cpu_setup(..)-function to adapt it for use with libfdt based on code from mpc5xxx Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
2007-11-03changes for IDS8247 board supportSergej Stepanov
To get the IDS8247 board working following are done: - FCC2 is deactivated - FCC1 is activated - I2C is activated - CFI driver is activated - Adapted for use with LIBFDT Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
2007-11-02Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk
2007-11-02Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-11-01ATSTK1002: Remove default ethernet addressesHaavard Skinnemoen
Wolfgang is right: It's not a good idea to set up default initial ethernet addresses for a board, even though they belong to the local range. This will change the failure mode from "IT manager screams at you for using duplicate ethernet addresses" to a nice error message explaining that the ethernet address hasn't been set properly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-01DHCP Client FixJustin Flammia
This is a multi-part message in MIME format. commit e6e505eae94ed721e123e177489291fc4544b7b8 Author: Justin Flammia <jflammia@savantav.com> Date: Mon Oct 29 17:19:03 2007 -0400 Found a bug in the way the DHCP Request packet is built, where the IP address that is offered by the server is bound to prematurely. This patch is a fix of that bug where the IP address offered by the DHCP server is not used until after the DHCP ACK from the server is received. Signed-off-by: Justin Flammia <jflammia@savantav.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk
2007-11-01Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk
2007-11-01Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk
2007-10-25ColdFire 54455: Fix correct boot location for atmel and intelTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire: Fix build error when CONFIG_WATCHDOG is definedTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5329: Assign correct SDRAM size and fix cacheTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5253: Assign correct SDRAM sizeTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25ColdFire 5282: Fix external flash boot and return dramsizeTsiChungLiew
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-10-25TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).Bartlomiej Sieka
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-10-24Merge branch 'motionpro_ng' of /home/tur/git/u-bootWolfgang Denk
2007-10-24TQM5200: fix spurious characters on second serial interfaceMartin Krause
With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-24TQM5200S: fix commands for STK52xx base board because of missing SM501 ↵Martin Krause
grafic controller Some commands for the STK52xx base board try to access the SM501 grafic controller. But the TQM5200S has no grafic controller (only the TQM5200 and the TQM5200B have). This patch deactivates the commands accessing the SM501 for the TQM5200S. Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-24TQM5200: fix spurious characters on second serial interfaceMartin Krause
With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-10-24TQM5200S: fix commands for STK52xx base board because of missing SM501 ↵Martin Krause
grafic controller Some commands for the STK52xx base board try to access the SM501 grafic controller. But the TQM5200S has no grafic controller (only the TQM5200 and the TQM5200B have). This patch deactivates the commands accessing the SM501 for the TQM5200S. Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-10-24Mips: Fix string functions differ prototype declarationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24fsl_pci_init enable COMMAND_MEMORY if inbound windowEd Swarthout
Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows to pciauto_setup_device has the side effect of not getting COMMAND_MEMORY set. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-10-24delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declarationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24fix warning: no return statement in function returning non-voidJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24xsengine: Fix no partition type specified, use DOS as defaultJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24lubbock: Fix no partition type specified, use DOS as defaultJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-23Coding style: keep lists sorted; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-23Fix missing drivers makefile entries ds1722.c mw_eeprom.cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-23Fix warning differ in signedness in board/innokom/innokom.cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-23fix pxa255_idp boardMarcel Ziswiler
The pxa255_idp being an old unmaintained board showed several issues: 1. CONFIG_INIT_CRITICAL was still defined. 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. 3. Symbol flash_addr was undeclared. 4. The boards lowlevel_init function was still called memsetup. 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. 6. Using -march=armv5 instead of -march=armv5te resulted in lots of 'target CPU does not support interworking' warnings on recent compilers. 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as indexes rather than the register definitions from the pxa-regs header file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to avoid any ambiguities. 8. There were several redefinition warnings concerning ICMR, OSMR3, OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. 9. The board configuration file was rather outdated. 10. The part header file defined the vendor, product and revision arrays as unsigned chars instead of just chars in the block_dev_desc_t structure. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2007-10-23Make MPC8266ADS command selection more robustRune Torgersen
Fix MPC8266 command line definition so it won't break when new commands are added to u-boot. Signed-off-by Rune Torgersen <runet@innovsys.com>
2007-10-23Motion-PRO: Update configuration to accomodate next generation board.Bartlomiej Sieka
New board has faster oscillator and a different Flash chip. This affects: - CFG_MPC5XXX_CLKIN - SDRAM timings - Flash CS configuration (timings) - Flash sector size, and thus MTD partition layout - malloc() arena size (due to bigger Flash sectors) - smaller memory test range (due to bigger malloc() arena) This patch also enables more extensive memory testing via "mtest". Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-10-23Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.Bartlomiej Sieka
Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay register must be written a value of 0x00000004 as the first step of the SDRAM contorller configuration. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-10-23Move PL01* serial drivers to drivers/serial and adjust Makefiles.Peter Pearse
2007-10-23Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfixMartin Krause
2007-10-21[MIPS] Fix UNCACHED_SDRAMVlad Lungu
PHYSADDR is for physical address, KSEG1ADDR is for uncached. Signed-off-by: Vlad Lungu <vlad@comsys.ro> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-10-21[MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanupShinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-10-21[MIPS] u-boot.lds: Define _gp in a standard mannerShinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-10-21[MIPS] Fix $gp usageShinya Kuribayashi
Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. As a general principle, we should use _gp for $gp. Thanks to linker script's help we fortunately have _gp which equals to _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not be able to access to GOT entires, global variables and procedure entry points. The right thing to do is to use _gp. This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' which holds the offset from _gp. When updating GOT entries, we use this offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then I made some change to leave over num_got_entries. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Cc: Vlad Lungu <vlad@comsys.ro>
2007-10-21[MIPS] u-boot.lds: Fix __got_start and __got_endShinya Kuribayashi
Ensure that __got_start points to top of the `.got', and __got_end points to bottom as well, so that we never fail to count num_got_entries. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-10-21[MIPS] u-boot.lds: Remove duplicated .sdata sectionShinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2007-10-21Minor coding style cleanup; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-21Fix NE2000 driver:Vlad Lungu
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx(). Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-10-21Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk
2007-10-21Merge branch 'master' of /home/git/u-boot/Wolfgang Denk
2007-10-19Setting MSR[DE] in do_reseturwithsughosh@gmail.com
Hello, This patch ensures the soft reset of the board for the 85xx boards by setting the MSR[DE] in the do_reset function. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 00:14:57 +0000