aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-13imx8mp_evk: Convert to DM_PMICFabio Estevam
Currently, the imx8mp_evk uses the non-DM code to initialize the PMIC. Convert to DM_PMIC, which is the recommended way to access the PMIC. While at it, fix multi-line comments style. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-12-13arm: dts: imx8mp-venice-gw73xx: add TPM deviceTim Harvey
Add the TPM device found on the GW73xx revision F PCB. This hangs off of SPI2, uses gpio1_10 as a CS and gpio1_11 as RST#. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-13arm: dts: imx8mm-venice-gw73xx: add TPM deviceTim Harvey
Add the TPM device found on the GW73xx revision F PCB. This hangs off of SPI2, uses gpio1_10 as a CS and gpio1_11 as RST#. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-13imx8mn-var-som: add manufacturer to target descriptionHugo Villeneuve
Add Variscite manufacturer to the IMX8MN_VAR_SOM target menu label as the majority of targets include the manufacturer as part of their menu description/label and it helps when looking for a particular manufacturer/board. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-13arm: dts: imx93-evk: remove wrong eqos compatible stringSébastien Szymanski
The correct compatible string for i.MX93 variant of DWC EQoS MAC is now "nxp,imx93-dwmac-eqos". Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-12-13net: phy: realtek: Add support for RTL8211F(D)(I)-VD-CGSébastien Szymanski
Add support for the RTL8211F(D)(I)-VD-CG PHY present on the i.MX93 EVK board. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-12-13net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93Sébastien Szymanski
Add a common board_interface_eth_init() called by the DWC MAC driver to setup the MAC <-> PHY interface according to the PHY mode obtained from DT. Remove the board-side configuration in the i.MX93 EVK files. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-12-13net: dwc_eth_qos: add i.MX93 supportSébastien Szymanski
Add support for DWC EQoS MAC on i.MX93. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-13ARM: imx8ulp: support env in fat and ext4Ricardo Salveti
Change boot device logic to also allow environment stored in fat and in ext4 when booting from SD or eMMC. As the boot device check for SD and for eMMC was depending on ENV_IS_IN_MMC being defined, change the ifdef blocks at env_get_location to use IS_ENABLED instead for all modes, returning NOWHERE when no valid mode is found. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-12-13imx: imx8: ahab: refactor do_ahab_close commandIgor Opaniuk
Move an OEM closing logic to ahab_close() function to be able to use it directly without calling a u-boot command. Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-12-13arm: mxs: Fix ICOLL macro name typoMarek Vasut
The interrupt collector macro name for i.MX23 is MXS_ICOLL_BASE, this is correct and matches the documentation of both i.MX23 and i.MX28. Align the i.MX28 macro accordingly. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2023-12-13arm: dts: imx8mm-phyboard-polis-rdk: Sync dts files with kernelCem Tenruh
Sync the devicetree files used in the kernel for the imx8mm-phyboard-polis with the corresponding devicetree files in U-Boot. Replaced phycore-imx8mm.dts with kernel dts imx8mm-phyboard-polis-rdk.dts Synced with kernel 6.5.0-rc1 commit e752a4f9589c (arm64: dts: freescale: imx8mm-phyboard: Add I2C4 pinmuxing) Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
2023-12-13imx7d-sdb: Sync devicetree with kernel 6.5-rc1Fabio Estevam
Commit 0aea5dda2928 ("ARM: dts: imx7d-sdb-u-boot: Fix usdhc1 UHS operation") did a temporary workaround by addng the usdhc1 fix inside the -u-boot.dtsi file. The imx7d-sdb.dts from kernel 6.5-rc1 contains the proper UHS fix, so sync the devicetree tree and remove the previous fix from -u-boot.dtsi. Also, adjust the PMIC node name inside pmic_get() to match the devicetree update. Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-12-13imx: imx8mp: Add support for Polyhex Debix Model A SBCGilles Talis
Add support for the Polyhex Debix Model A SBC board. It is an industrial grade single board computer based on NXP's i.MX 8M Plus. Currently supported interfaces are: - Serial console - Micro SD - eQOS and FEC Ethernet imx8mp-debix-model-a.dts is taken from Linux 6.3. Signed-off-by: Gilles Talis <gilles.talis@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-12-13imx8qm_dmsse20a1: Improve SPL memory configurationFabio Estevam
Currently, building imx8qm_dmsse20a1_defconfig leads to the following warning: aarch64-linux-ld.bfd: invalid origin for memory region .sdram Fix it by using the same SPL memory layout as done in the imx8mq_evk. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-12-13ddr: imx: Save the FW loading if it hasn't changedShawn Guo
Function ddr_load_train_firmware() is called 4 times in a loop by ddr_cfg_phy(). The first 3 calls are all '1D' type and just loading the same FWs. Let's add a type check and save 2 of them. This helps to reduce DDRPHY training time from 269 ms down to 212 ms, and thus speed up boot time ~ 50 ms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-12-10test: bdinfo: Handle systems without getoptMarek Vasut
Systems without getopt support fall back to plain full bdinfo print, handle such a case, which occurs e.g. with sandbox_flattree_defconfig . Fixes: 8827a3871452 ("test: bdinfo: Test bdinfo -h") Fixes: 2696f3ab8101 ("test: bdinfo: Test bdinfo -m") Fixes: 3ff2d796a6f2 ("test: bdinfo: Test bdinfo -e") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09test/py: Disable error E0611 in two cases for pylintTom Rini
Recently pylint has started to complain about: No name 'fs_helper' in module 'tests' (no-name-in-module) Due to: from tests import fs_helper However, we have: test/py/tests/fs_helper.py And since we do not want to add a dummy test/py/tests/__init__.py to silence this warning we instead just disable it as needed. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-12-09Merge patch series "cmd: bdinfo: Optionally use getopt and implement bdinfo -a"Tom Rini
Clean up our bdinfo command a bit and introduce "bdinfo -a"
2023-12-09test: bdinfo: Test bdinfo -eMarek Vasut
The bdinfo -e should print only the board ethernet settings. Test the expected output. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09test: bdinfo: Test bdinfo -mMarek Vasut
The bdinfo -m should print only the board memory layout. Test the expected output. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-12-09test: bdinfo: Test bdinfo -hMarek Vasut
The bdinfo -h should print error message that -h is an unknown parameter and then command help text. Test the expected output. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09test: bdinfo: Test both bdinfo and bdinfo -aMarek Vasut
Factor out the core of test for all bdinfo output into bdinfo_test_all() and then reuse it to verify that both 'bdinfo' and 'bdinfo -a' print all the bdinfo output. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09test: bdinfo: Rename bdinfo_test_move() to bdinfo_test_full()Marek Vasut
Rename bdinfo_test_move() to bdinfo_test_full(). The former is a remnant of deriving this test from another test. No functional change. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09configs: sandbox: Enable GETOPT for sandbox and sandbox64 targetMarek Vasut
Enable GETOPT so that 'bdinfo' command with getopt() support can be tested in CI. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09cmd: bdinfo: Implement support for printing ethernet settings via bdinfo -eMarek Vasut
Add support for printing ethernet settings only via 'bdinfo -e' . Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09cmd: bdinfo: Implement support for printing memory layout via bdinfo -mMarek Vasut
Add support for printing memory layout only via 'bdinfo -m' . Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-09cmd: bdinfo: Optionally use getopt and implement bdinfo -aMarek Vasut
Add optional support for getopt() and in case this is enabled via GETOPT configuration option, implement support for 'bdinfo -a'. The 'bdinfo -a' behaves exactly like bdinfo and prints 'all' the bdinfo information. This is implemented in preparation for other more fine-grained options. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-04Merge tag 'v2024.01-rc4' into nextTom Rini
Prepare v2024.01-rc4 # -----BEGIN PGP SIGNATURE----- # # iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVuHrwACgkQFHw5/5Y0 # tyy3Tgv+LB/X0ZR3IHnu1mvQ7kpOFvAjjKr0BUpcEEzsrDZeJnS6sy06m+REez2E # UmuLeKFj5NUCYXNKtxn2+gVnJt8Tk6ftxhMTiZHmR4Y4NVc5aPtqYmVsv6Q29j0U # mcg7AGcZTniu9/naNM+ZcDeHzLDAB0whmE9eVfixXVgyitILoLHNdFiQ7W4oR7Kh # /mBgdMDBS3rqiRi6CuqKUnl4ADX8T3AXaSfi3hqOC5Pj+HPkZSUfyWx31mu9mN1D # wXTHASZX06Dop25fm/ZSdWk1blBw29WqRiJBdwNatvyC5pqMsotTvAfH2AcHBEYg # tpoper+WDOBAipt6b6Y1B7q4VPvJ97L9dFCAYqN0nGCe+rkdi+k+cly7M6Ye9xLt # e7rVUfnKgIMP8jkLcVBYoWkFY5FiJ82O5qjoF5N3dAuHeWacDFsB5TugDTOQvblH # LWCmcIyU1N9Ma/Ib0rTvNduvpBUYBKXYlD1+rjPZUbTUnfc79mf+ReFpcoW6Kxh+ # bkz81p8P # =ebIZ # -----END PGP SIGNATURE----- # gpg: Signature made Mon 04 Dec 2023 01:47:24 PM EST # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]
2023-12-04Prepare v2024.01-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-12-04efi_loader: generated SMBIOS table below 4 GiBHeinrich Schuchardt
We currently use an outdated format 32-bit format for SMBIOS tables. So we must allocate SMBIOS tables below 4 GiB. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-12-04Merge branch 'master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-watchdog - Correct watchdog timeout print message (Chanho Park)
2023-12-04watchdog: Correct watchdog timeout print messageChanho Park
The wdt_start function takes timeout_ms as a parameter and starts the watchdog with this value. However, when you output the message, it shows the default timeout value for the watchdog device. So this patch fixes that part to output the correct timeout value. Before --> StarFive # wdt start 3000 WDT: Started watchdog@13070000 without servicing (60s timeout) After --> StarFive # wdt start 3000 WDT: Started watchdog@13070000 without servicing (3s timeout) Fixes: c2fd0ca1a822 ("watchdog: Integrate watchdog triggering into the cyclic framework") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Stefan Roese <sr@denx.de>
2023-12-03Merge branch 'master-rpc-off' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh
2023-12-02Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
- USB XHCI fixes
2023-12-02ARM: dts: renesas: Disable RPC driver on R8A779G0 V4H White Hawk boardCong Dang
As requirement of CR side, QSPI Flash usage via RPC driver shall be disabled and leaving the control of this module to CR side. Perform DT modification to disable the RPC SPI. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Cong Dang <cong.dang.xn@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Do not modify defconfig, modify the DT instead, this way the RPC SPI can be enabled without recompiling the U-Boot itself. Update commit message accordingly.]
2023-12-02ARM: dts: renesas: Clean up R8A779G0 V4H RPC SPI DT nodeMarek Vasut
Use the phandle reference to &rpc node in arch/arm/dts/r8a779g0.dtsi and remove properties which are already in arch/arm/dts/r8a779g0.dtsi. No functional change and no resulting DT change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-12-01usb: USB_XHCI_PCI depends on PCIHeinrich Schuchardt
Compiling with CONFIG_USB_XHCI_PCI and CONFIG_PCI=n results in usb/host/xhci-pci.c:48:(.text.xhci_pci_probe+0x44): undefined reference to `dm_pci_write_config32 Add the missing Kconfig dependency. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: dwc3-generic: Use combined glue and ctrl node for RK3588Jonas Karlman
Like Rockchip RK3328 and RK3568, the RK3588 also have a single node to represent the glue and ctrl for USB 3.0. Use rk_ops as driver data to select correct ctrl node for RK3588 DWC3. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: storage: Use the correct CBW lengthsHector Martin
USB UFI uses fixed 12-byte commands (as does RBC, which is not supported), but SCSI does not have this limitation. Use the correct command block lengths depending on the subclass. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: hub: Add missing reset recovery delayHector Martin
Some devices like YubiKeys need more time before SET_ADDRESS. The spec says we need to wait 10ms. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Fix DMA address calculation in queue_trbHector Martin
We need to get the DMA address before incrementing the pointer, as that might move us onto another segment. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Do not panic on event timeoutsHector Martin
Now that we always check the return value, just return NULL on timeouts. We can still log the error since this is a problem, but it's not reason to panic. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Fail on attempt to queue TRBs to a halted endpointHector Martin
This isn't going to work, don't pretend it will and then end up timing out. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Recover from halted bulk endpointsHector Martin
There is currently no codepath to recover from this case. In principle we could require that the upper layer do this explicitly, but let's just do it in xHCI when the next bulk transfer is started, since that reasonably implies whatever caused the problem has been dealt with. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Allow context state errors when halting an endpointHector Martin
There is a race where an endpoint may halt by itself while we are trying to halt it, which results in a context state error. See xHCI 4.6.9 which mentions this case. This also avoids BUGging when we attempt to stop an endpoint which was already stopped to begin with, which is probably a bug elsewhere but not a good reason to crash. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Better error handling in abort_td()Hector Martin
If the xHC has a problem with our STOP ENDPOINT command, it is likely to return a completion directly instead of first a transfer event for the in-progress transfer. Handle that more gracefully. We still BUG() on the error code, but at least we don't end up timing out on the event and ending up with unexpected event errors. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-12-01usb: xhci: Guard all calls to xhci_wait_for_eventHector Martin
xhci_wait_for_event returns NULL on timeout, so the caller always has to check for that. This addresses immediate explosions in this part of the code when timeouts happen, but not the root cause for the timeout. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marek Vasut <marex@denx.de>
2023-11-30Merge branch 'staging' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tegra into next Device tree improvents for Paz00 and DM PMIC convertion of recently merged Tegra boards.
2023-11-29Merge branch '2023-11-29-assorted-platform-updates' into nextTom Rini
- Add a TFTP put test, a few TI Keystone 2 updates, fix stack-protector for PowerPC, fixes in lib/slre, timer-uclass and pvblock.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 17:17:09 +0000