aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-22arm: dts: Stratix10: change pad skew values for EMAC0 PHY driverOoi, Joyce
The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA drive strength has caused CE test to fail. This requires changes on the pad skew for EMAC0 PHY driver. Based on several measurements done, Tx clock does not require the extra 0.96ns delay which was needed in Arria10. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20ARM: socfpga: Fix default mtdpartsMarek Vasut
The default mtdparts value grew a trailing zero during the Kconfig conversion. This is because the mtdparts value in the header file had a \0 at the end, which got misconverted into plain 0 instead of being dropped. Signed-off-by: Marek Vasut <marex@denx.de> Fixes: 43ede0bca7fc ("Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT") Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20spi: cadence_qspi: support DM_CLKSimon Goldschmidt
Support loading clk speed via DM instead of requiring ad-hoc code. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20timer: dw-apb: add reset handlingSimon Goldschmidt
To use this DM timer on socfpga as system tick, it needs to take itself out of reset. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20socfpga: fix include guard in misc.h (arch vs. global)Simon Goldschmidt
The file arch/arm/mach-socfpga/include/mach/misc.h used the same include guard as the global include/misc.h. Fix this by giving the arch file an arch prefix. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20ddr: socfpga: gen5: constify altera_gen5_sdram_opsSimon Goldschmidt
Make the function pointer struct const, as it does not need to be writable. This doesn't really change anything other than moving this variable to a different section. No functional change. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20configs: Stratix10: Disable CONFIG_SPL_USE_TINY_PRINTFLey Foon Tan
Commit 2a51e16bd57a ("configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default") enable USE_TINY_PRINTF by default, disable it for Stratix10. Resync with savedefconfig. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20arm: dts: Stratix10: Fix memory node address and size cellsLey Foon Tan
Add #address-cells and #size-cells to memory node to fix incorrect memory size decoding in recent Uboot version. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-19input: Move input.o to be built only in some casesTom Rini
We only need to build and link input.o when we have any of CONFIG_KEYBOARD, CONFIG_DM_KEYBOARD (and SPL/TPL variants) or CONFIG_TEGRA_KEYBOARD set. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-19Merge tag 'efi-2020-01-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc4 Fix errors due to unaligned memory access: * disable UEFI except for ARMv8, ARMv7, ARM11 * enable unaligned access support on ARM11 Remove an unused function.
2019-11-19efi_loader: enable EFI_LOADER on arm1136 and arm1176Heinrich Schuchardt
With an implementation for allow_unaligned() available for arm1136 and arm1176 UEFI can be supported on these architectures. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19arm: arm11: allow unaligned memory accessHeinrich Schuchardt
The UEFI spec mandates that unaligned memory access should be enabled if supported by the CPU architecture. This patch implements the function unaligned_access() to set the enable unaligned data support flag and to clear the aligned flag in the system control register (SCTLR). It is called when UEFI related commands like bootefi are invoked. Reported-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Tested-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19efi_loader: restrict EFI_LOADER to armv7 and armv8 on ARMHeinrich Schuchardt
fatload USB was reported to fail on the Sheevaplug. Debugging showed that this was caused by an incorrect unaligned write to memory in path_to_uefi(). UEFI on ARM requires that unaligned memory access is enabled. * ARMv5 does not support unaligned access at all. * ARMv6 supports unaligned access when we clear the A flag and set the U flag. * On ARMv7 unaligned access is possible when clearing the aligned flag, which we do in function allow_unaligned() (arch/arm/cpu/armv7/sctlr.S). For none of the other cpus in arch/arm/cpu/ we have implemented a similar function. * ARMv8 allows unaligned access. Let EFI_LOADER on ARM depend on SYS_CPU=armv7 or SYS_CPU=armv8. Once we have implemented allow_unaligned() for other ARM CPUs we can add these to Kconfig. Reported-by: Gray Remlin <gryrmln@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19efi_loader: remove unused function efi_dp_from_dev()Heinrich Schuchardt
Function efi_dp_from_dev() is not used anywhere. Remove it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-18Prepare v2020.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-18Merge tag 'video-for-v2020.01-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix i.MX6ULL evk black screen observed while reboot stress tests - remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree differences between Linux and U-Boot for stm32mp1 platform
2019-11-17Merge tag 'u-boot-rockchip-20191118' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip SoC: PX30, RK3308 - Add and migrate to use common dram driver: PX30, RK3328, RK3399 - Add rk3399 board Tinker-s support - Board config update for Rock960, Rockpro64
2019-11-17Merge tag 'dm-pull-14nov19' of git://git.denx.de/u-boot-dmTom Rini
Add OP-TEE test swuit Fix patman cc_file output Minor sandbox/pinctrl changes
2019-11-17rockchip: dts: tinker: Add tinker-s board supportMichael Trimarchi
Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: dts: tinker: Move u-boot dmc initialization to specific sectionMichael Trimarchi
dmc is used to initialize the memory controller. It's needed by u-boot. Move it in the specific section Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: imply instead of selecting SPL_SYS_MALLOC_SIMPLEThomas Hebb
We shouldn't force which allocator the SPL uses, since there's no platform requirement for one over the other: in fact, we currently allow selection of the TPL allocator but not the SPL one! Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: allow DRAM init in SPLThomas Hebb
The common SPL removed SoC-specific code for RK3399's SPL and in the process caused the previously-unconditional DRAM initialization in board_init_f() to only happen when compiling a configuration that does not support TPL, meaning DRAM never gets initialized if TPL is supported but disabled. Fix this by omitting the DRAM init in SPL only when we are configured to also build a TPL. This fixes custom configurations that have disabled TPL, and it should also unbreak the "ficus-rk3399", "rock960-rk3399", and "chromebook_bob" defconfigs, although since I don't have any of those devices I can't confirm they're broken now. Fixes: b7abef2ecbcc ("rockchip: rk3399: Migrate to use common spl board file") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: SPL: fix ordering of DRAM initThomas Hebb
The common SPL code reordered the DRAM initialization before rockchip_stimer_init(), which as far as I can tell causes the RK3399 to lock up completely. Fix this issue in the common code by putting the DRAM init back after timer init. I have only tested this on the RK3399, but it wouldn't make any sense for the timer init to require DRAM be set up on any system. Fixes: b7abef2ecbcc ("rockchip: rk3399: Migrate to use common spl board file") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17doc: rockchip: Add documentation for rk3308 based boardsAndy Yan
Add build documentation for rk3308 based boards. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3308: Add support for ROC-RK3308-CC boardAndy Yan
ROC-RK3308-CC is a rk3308 based board designed by Firelfy, with eMMC and 256MB DDR3 and RTL8188 Wifi on board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3308: Add dts for ROC-RK3308-CCAndy Yan
Add dts file for ROC-RK3308-CC from firefly. Sync form linux rockchip for v5.5-armsoc/dts64: "arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc" (sha1: 4403e1237be3af0977aa23ef399e3496316317a0) Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: mkimage: add support for RK3308Andy Yan
Usage: (1) tools/mkimage -n rk3308 -T rksd -d tpl/u-boot-tpl.bin idbloader.img (2) cat spl/u-boot-spl.bin >> idbloader.img (3) upgrade_tool wl 0x40 idbloader.img Note: When use ddr binary from rkbin as tpl, use it replace u-boot-tpl.bin in(1) Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3308: Add sdram driverAndy Yan
A dm based dram driver for rk3308 u-boot to get capacity. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17board: rockchip: Add rk3308 evb supportAndy Yan
Add support for rk3308 evaluation board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: dts: rockchip: Add dts for rk3308 evbAndy Yan
Add dts for rk3308 evb, sync from the linux kernel upstream list [0]. [0]https://patchwork.kernel.org/patch/11201555/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: Add clk driver for rk3308Finley Xiao
Add clk controller driver for RK3308 SOC. This patch depends on Elaine's pll patch[0]. [0]http://patchwork.ozlabs.org/patch/1183718/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: rockchip: Add RK3308 SOC supportAndy Yan
RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: pll: add common pll setting funcsElaine Zhang
Common PLL setup function, compatible with different SOC. Mainly for the subsequent new SOC use. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: orangepi: Add init value for vdd_logKever Yang
We should set the init value when vdd_log is enabled, or else the vdd_log output voltage may not in soc required range. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: khadas-edge: Add init value for vdd_logKever Yang
We should set the init value when vdd_log is enabled, or else the vdd_log output voltage may not in soc required range. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: rock-pi4: Add init value for vdd_logKever Yang
We should set the init value when vdd_log is enabled, or else the vdd_log output voltage may not in soc required range. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm64: dts: rk3399-rock960: add vdd_log and its init valueKever Yang
Add vdd_log node according to rock960 schematic V13. This patch affect two boards: - Rock960 Model A - Ficus Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-11-17rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsiPeter Robinson
The u-boot specific device tree directives should be in u-boot.dtsi Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsiPeter Robinson
The u-boot specific device tree directives should be in u-boot.dtsi Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsiPeter Robinson
The u-boot specific pieces in the dts files should be in u-boot.dtsi not the main files, this allows easier sync with upstream. The rk3399.dtsi has a mix of both so move them all for consistency. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Fix with missing pmugrf) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: split rockpro64 out of evb_rk3399Vasily Khoruzhick
rockpro64 needs to setup I/O domains in order for USB to work in u-boot. Since we currently don't have a driver to do that, split it into its own board file and initialize I/O domains here. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: fix wrong CONFIG_IS_ENABLED handlingHeiko Stuebner
CONFIG_IS_ENABLED() needs the config name like used in Kconfig, so without the leading CONFIG_. The clock drivers all wrongly check for CONFIG_RESET_ROCKCHIP, fix that Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: rv1108: remove duplicate reset initHeiko Stuebner
rockchip_reset_bind() already does the needed init for the reset registers, only referenced the wrong cru structure. So we can get rid of the open-coded reset init and just fix the correct cru reference. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: dts: rk3399-rockpro64: slightly increase center voltageSoeren Moch
The rk3399 VD_CENTER voltage domain is not subject to dynamic voltage scaling. So the regulator reset voltage of 0.9V is used on this board. Let u-boot initialize the center voltage to 0.95V as it is done for the VD_LOGIC domain. This avoids instability and occasional linux kernel Opses on this board. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: dts: rk3399-rockpro64: sync dts from linux kernelSoeren Moch
The most important change for u-boot is the fix for the vdd-log pwm voltage regulator to avoid overvoltage for the VD_LOGIC power domain. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: rock960: Update config for TPLPeter Robinson
Enable TPL for rock960 like other rk3399 boards. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfigJagan Teki
roc-rk3399-pc_defconfig is committed in below commit <8a681f4c5aa15db51ad0209734859c9fe7c29cfd> ("rockchip: rk3399: Add ROC-RK3399-PC support") which doesn't follow the existing defconfigs on rk3399. So, rename as followed with other rk3399 defconfigs. Cc: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: dts: rk3399-roc-pc: Sync latest dts changes from LinuxJagan Teki
Few important regulator power rails fixes are available in linux-next, so sync them same. Here is the last commit details: commit <9f7f9b610e1b7d2dc86c543ab0dfcf781bd42326> ("arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails") Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: Init driver otg_data for rk3288 usb phyKever Yang
RK3288 needs to init the otg_data in board level to make the phy driver work. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 01:21:02 +0000