aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-24arm64: xilinx: Move firmware functions from platform to driverMichal Simek
versal_pm_request() and invoke_smc() are almost the same. Only one difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id. The patch is moving platform implementation to firmware driver code for synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24arm64: versal: Clean pm_api_id usageMichal Simek
Copy enum values from platform code to firmware code. IDs are shared between ZynqMP and Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-23Merge tag 'u-boot-stm32-2019-10-23' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Disable CONFIG_NET flag for MCU STM32 - Fix ramdisk_addr_r for stm32f746-disco - Fix USB product id for stm32mp1
2019-10-23Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add LS1027A, LS1018A, LS1017A support - Few updates related to usb, ls1012a, lx2160a
2019-10-22board: stm32mp1: fixup the usb product id for USB download gadgetPatrick Delaunay
Select the correct USB product id used by the download gadget for ST stm32mp1 boards. The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-22configs: stm32f746-disco: Fix ramdisk_addr_rPatrice Chotard
Set ramdisk_addr_r to 0xC0600000. Reported-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-eval: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-disco: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f469-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-evaluation: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21dm: pinctrl: fix for introduce PINCONF_RECURSIVE optionPatrick Delaunay
Correct the name of the define used CONFIG_IS_ENABLED which is not aligned with Kconfig name: CONFIG_$(SPL_)PINCONF_RECURSIVE. The recursive calls is conditional only for UCLASS_PINCONFIG "pinconfig" driver. It is always needed to call pinctrl_post_bind for UCLASS_PINCTRL "pinctrl", the test CONFIG_IS_ENABLED(PINCONF_RECURSIVE) need to be removed for this driver. This correct a regression introduced because the same patch is applied twice times in u-boot-dm branch: - commit e878b53a79d1 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") - commit c20851b3d850 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21pinctrl: Kconfig: remove duplicated nodesPatrick Delaunay
Remove the duplicated configs introduced when the same patch is applied twice times: - commit e878b53a79d1 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") - commit c20851b3d850 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21armv7: ls102xa: Don't power down OCRAM1 during deep sleepBiwen Li
To allow OCRAM to be used as wakeup source in deep sleep, do not power it down. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: add errata ID A-008646 for workaroundBiwen Li
The patch adds an errata ID A-008646 for workaround to provide more information by errata ID. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: Update LX2160A/LX2120A/LX2080A SVR valueWasim Khan
LX2160A/LX2120A/LX2080A SVR value should be 0x873600/0x873620/0x873602 Previous values were valid only if CAN fuse is blown. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: disable multimedia for ls1027a, ls1017aYuantian Tang
ls1028a has 4 personalities: ls1028a, ls1027a, ls1017a and ls1018a. Both ls1027a and ls1017a personalities are lower functionality version which doesn't support the multimedia subsystems, like LCD, GPU. To disable multimedia feature on non-multimedia version, set the status property to disabled in dts nodes. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21board/ls1028a: Add call to sec_init()Udit Agarwal
Adds sec_init call to initialise the job ring parameters for secure boot operations. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21configs: ls1012afrwy: Add CONFIG_ENV_ADDRKuldeep Singh
This configuration enables picking the environment from flash before DDR init. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Correct endianness of SCFG_SPARECR8 readBiwen Li
The patch corrects endianness of register SCFG_SPARECR8 read in_le32 -> in_be32 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: fsl-layerscape: Make USB masters snoopableRan Wang
Program register bit of SCFG_SNPCNFGCR_USBxRDSNP and SCFG_SNPCNFGCR_USBxWRSNP(x = 1, 2, 3) to drive USBx read/write snoop signal on LS1043A and LS1046A. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Update SCFG_QSPI_CLKSEL valueKuldeep Singh
Update SCFG_QSPI_CLKSEL value : 0xC -> 0x5 which means ClusterPLL/16 Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21configs: ls1012ardb: Add CONFIG_ENV_ADDRKuldeep Singh
CONFIG_ENV_ADDR config option enables picking the environment from flash before DDR init. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: Add more personalities supportYuantian Tang
Add LS1027A, LS1018A and LS1017A personalities support to LS1028A SoC family. LS1028A is the prime personality of LS1028A SoC family. LS1027A is a lower funtionality version of QorIQ LS1028A which does not support the multimedia subsystems, such as LCD controller, GPU, and eDP PHY. The QorIQ LS1018A and LS1017A SoCs are single 64-bit Arm A72 core, low power versions of the QorIQ LS1028A and LS1027A SoCs respectively. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-18spl: mmc: make eMMC HW boot partition configuration optionalAnatolij Gustschin
Loading U-Boot on i.MX8QXP MEK board is broken since recent changes in spl_mmc: U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46400 spl: mmc partition switch failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option is selected automatically and overrides the EXT_CSC_PART_CONFIG configurations with default value, always selecting the eMMC boot partition 1. Boards which place U-Boot image in other partitions became not bootable. Fix this by making the eMMC HW boot partition selection optional. Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-18Merge tag 'efi-2020-01-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc1 (2) Install the simple file protocol only if there is a file system on the partition. Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
2019-10-18Merge tag 'u-boot-amlogic-20191018' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - document alternative libretech-cc installation methods, including upstream TF-A and opensource tools - add HDMI/CVBS display support for Amlogic G12A SoCs and SEI510 board - add support for Amlogic A311D based Khadas VIM3 - add support for Amlogic S905X3 based SEI610 board, targeting Android support like SEI510
2019-10-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Support sifive DM based gpio driver for FU540-SoC. - Align boot image header with Linux v5.3
2019-10-18configs: sei610: Add config file to fix userdata sizeGuillaume La Roque
Add separate config file to handle the different eMMC size on the sei610 board. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: rework header and fix userdata sizeGuillaume La Roque
Move android generic config and boot sequence in meson64_android header and fix size of userdata to use all eMMC on SEI510. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18boards: amlogic: add SEI610 supportNeil Armstrong
Add support for the customer board SEI610 manufactured by SEI Robotics with the following specifications: - Amlogic S905X3 ARM Cortex-A55 quad-core SoC - 2GB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - 1 x USB Type-C DRD - 1 x FTDI USB Serial Debug Interface - eMMC - SDcard - Infrared receiver - SDIO WiFi Module Like it's SEI510 counterpart, the boot flow is designed to boot Android AOSP built for the Yukawa Android device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: meson-sm1: add U-Boot specific DT for graphicsNeil Armstrong
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi to handle the U-Boot specific DT for graphics. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable everything-else power domainNeil Armstrong
The GX VPU Power Domain driver has been replaced by the Everything-Else Power Domain driver for G12A and SM1. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18power: domain: add Amlogic Everything-Else power domain driverNeil Armstrong
Based on the 54ecb8f7028c ("Linux 5.4-rc1") Everything-Else power domain driver for Amlogic SoCs. This driver handles the VPU Power domain and other domains from the Everything-Else part of the SM1 and G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: Import SEI610 DT from Linux 5.4-rc2Neil Armstrong
Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18clk: meson-sm1: add compatibleNeil Armstrong
The SM1 clock controller is almost identical to the G12A and so far the differences don't matter. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18mmc: meson-gx: add support for mmc-pwrseq-emmcNeil Armstrong
Add support for mmc-pwrseq-emmc in the meson-gx mmc driver to support enabling the eMMC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: meson: add SM1 SoC idNeil Armstrong
Add the missing IDs to detect the SM1 S905X3 SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Recognize A311D SoCAndreas Färber
Values imported from Linux driver, but in correct numeric order. Khadas VIM3 prints: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Cc: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Tidy SoC information outputAndreas Färber
Write SoC instead of Soc. The Linux driver is not affected. Fixes: f41d723b9f ("ARM: meson: display Amlogic SoC Information") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: Add Khadas VIM3 defconfigAndreas Färber
Derived from odroid-n2_defconfig and README.odroid-n2. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: dts: Import and update DT for Khadas VIM3Andreas Färber
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable Video Display supportNeil Armstrong
Add the necessary config options to support BMP display over HDMI, and add a preboot command to load the BMP file from a predefined eMMC partition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18ARM: dts: meson-g12a: add U-Boot specific DT for graphicsNeil Armstrong
Like the meson-gx support, add the U-Boot specific bits in DT to support graphics on G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18arm: meson: board-g12a: Setup VPU in fdtNeil Armstrong
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer. Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for EFI, and sets up simple-framebuffer nodes if simplefb support is enabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: add compatible for Amlogic G12ANeil Armstrong
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: sync with linux drm-misc treeNeil Armstrong
Synchronize the Amlogic Meson Video driver back with the latest DRM misc tree, adding G12A platform support, from the latest commit: 528a25d040bc ("drm: meson: use match data to detect vpu compatibility") The sync includes the following changes from Linux adapted to U-Boot: - Add support for VIC alternate timings - Switch PLL to 5.94GHz base for 297Mhz pixel clock - Add registers for G12A SoC - Add G12A Support for VPP setup - Add G12A Support for VIU setup - Add G12A support for OSD1 Plane - Add G12A support for plane handling in CRTC driver - Add G12A support for CVBS Encoder - Add G12A Video Clock setup - Add G12A support for the DW-HDMI Glue - fix G12A HDMI PLL settings for 4K60 1000/1001 variations - fix primary plane disabling - fix G12A primary plane disabling - mask value when writing bits relaxed - crtc: drv: vpp: viu: venc: use proper macros instead of magic constants - global clean-up - add macro used to enable HDMI PLL - venc: set the correct macrovision max amplitude value Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: remove power domain getNeil Armstrong
Remove getting and enabling the node power domain since it's now handled by the dm core directly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18clk: meson: g12a: add support for VPU/HDMI clocksNeil Armstrong
Add necessary clock support to set up clock for the VPU and HDMI support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18power: domain: meson-gx-pwrc: add G12A supportNeil Armstrong
Add Amlogic G12A support for the gx-pwrc driver, aligned on the Linux v5.2 driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:35:26 +0000