aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-22xilinx: versal-net: Add support for saving env based on bootmodeVenkatesh Yadav Abbarapu
Enable saving variables to MMC(FAT) and SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Enable ENV_FAT_DEVICE_AND_PART="0:auto" for versal-net platform as well. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20240312113421.7394-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-03-12arm64: zynqmp: Describe USB wakeup interruptMichal Simek
Describe usb wakeup interrupt. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/d8109a218f70c257e4fc52b5032b7df68fc00786.1709887312.git.michal.simek@amd.com
2024-03-12arm64: zynqmp: Remove additional compatible string for sc-revBMichal Simek
Based on dt schema there is no need to specify flash via additional compatible string and generic are enough. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/54e77ad480c5de8703cb5b22408dc3bf72f3f431.1709887280.git.michal.simek@amd.com
2024-03-12arm64: zynqmp: Fix gpio-key DT descriptionMichal Simek
All gpio-key descriptionos with dt-schema. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a67884f4fad98b94198123eef45ffdad511b0dc6.1709887234.git.michal.simek@amd.com
2024-03-12arm64: zynqmp: Add label to pmu fwnodeLukas Funke
ZynqMP CG series devices only have two cpus. In this case the interrupt-affinity property has to adapted, because cpu3 and cpu4 are missing. By adding a label to the pmu fwnode the interrupt-affinity can be adapted in a device specific DT. Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com> Link: https://lore.kernel.org/r/20240307152956.431104-1-lukas.funke-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-03-12mtd: nand: arasan: Fix the crash caused by use after freeVenkatesh Yadav Abbarapu
The below exception observed on QEMU, as it doesn't support NAND controller. "Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878 elr: 000000000803ad40 lr : 000000000805f438 (reloc) elr: 000000007fcb4d40 lr : 000000007fcd9438 x0 : 000000007bbfc880 x1 : 00000000ff100000 x2 : 000000007fcf059c x3 : 000000007bbfc870 x4 : 000000007fd9a388 x5 : 000000017acfc870 x6 : 0000000000000000 x7 : 000000007bbfd0e0 x8 : 0000000000003dd4 x9 : 000000007bbeec0c x10: 0000000000000001 x11: 0000000000003f8c x12: 000000007bbeecfc x13: 000000007bbeeeb0 x14: 000000007bbeeeb0 x15: 000000007bbee474 x16: 000000007fcef18c x17: 0000000000000000 x18: 000000007bbf9d70 x19: 000000007bbfc888 x20: 000000007bbfc870 x21: 000000007fd68ddb x22: 00000000ffffffed x23: 000000007bbfc878 x24: 0000000000000000 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 0000000000000000 x29: 000000007bbeed10 Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2) Resetting CPU ... The crash is caused by the use after free. Updating the correct return codes rather than hardcoding. Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand") Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-03-12mtd: nand: arasan: Print warning for unsupported ecc modesVenkatesh Yadav Abbarapu
Currently only hw ecc is supported in U-Boot. If any other ecc mode is given in DT, it simply through an error. So better print what is being done. Revert this patch once soft ecc support is fixed in future. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-03-12arm64: zynqmp: Add usb4 to the boot targetsVenkatesh Yadav Abbarapu
USB4 has been added to the boot targets and also add support to enable JTAG. Signed-off-by: Shubhangi Shrikrushna Mahalle <shubhangi.shrikrushna-mahalle@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20240305110256.153308-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-03-01riscv: mbv: Enable SPL and binmanMichal Simek
Enable SPL and binman to generate u-boot.img (machine mode) and u-boot.itb (supervisor mode). DTB is placed at fixed address to ensure that it is 8 byte aligned which is not ensured when dtb is attached behind SPL binary that's why SPL and U-Boot are taking DTB from the same address. Also align addresses for both defconfigs. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/85506bce5580d448f095f267d029e3932c5e9990.1707911544.git.michal.simek@amd.com
2024-03-01riscv: mbv: Moving little_endian variable to data sectionMichal Simek
SPL is cleaning bss after calling board_init_f. Setting up console is done and little_endian global variable is cleared which caused that console stops to work. That's why move it to data seciton now. The patch should be reverted when bss is cleared before board_init_f is called. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/934dc8871c59265eb9d8012193aa97d9b8bd7f33.1707911544.git.michal.simek@amd.com
2024-03-01riscv: mbv: Switch to OF_SEPARATE with fixed addressMichal Simek
Hardcode DTB address to specific address. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a5ad3c8d21be311254dd950e4e322d13cacdc176.1707911544.git.michal.simek@amd.com
2024-03-01riscv: mbv: Enable REMAKE_ELF by defaultMichal Simek
Create also u-boot.elf out of u-boot ELF. It is better to align it with other Xilinx SOC where u-boot.elf also exists and tools like bootgen works only with files with .elf extension. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/50bc5a360c37accd0eee1eecfd291b145a29acd0.1707911544.git.michal.simek@amd.com
2024-03-01riscv: mbv: Align addresses with default DTMichal Simek
Better to align everything with memory map described in DT to avoid mistakes. Execute both modes form the same address to make address map more understandable. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/be54c668d5626ccd702507a86c2a95d1eaefc690.1707911544.git.michal.simek@amd.com
2024-03-01arm64: zynqmp: Remove snps,enable_guctl1_ipd_quirk propertyMichal Simek
Remove undocumented DT property. Suggested solution was to apply quirk via glue logic driver that's why make no sense to have it listed in DT. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/2067eefbad161dee64b1dc7d97c498f09a8307a2.1708962844.git.michal.simek@amd.com
2024-03-01arm64: zynqmp: Support semihosting boot methodSean Anderson
Currently, when we boot from JTAG we try to boot U-Boot from RAM. However, this is a bit tricky to time, since the debugger has to wait for SPL to initialize RAM before it can load U-Boot. This can result in long waits, since occasionally initializing RAM (and other things in psu_init) takes a long time to complete and the debugger must wait for this worst case. Support semihosting if it is enabled, as it lets U-Boot tell the debugger when we are ready for the image. This means we don't have to wait any more than necessary. We don't change the default config to ensure we don't break compatibility with existing debuggers that don't expect us to hit semihosting breakpoints. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240222200512.2679830-1-sean.anderson@linux.dev Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-02-27Merge patch series "Dockerfile: Build coreboot from source"Tom Rini
To make our CI loops more robust, switch to building and providing the coreboot binary we test with rather than download from a Google Drive link.
2024-02-27CI: Move to latest container imageTom Rini
This moves us to our latest container image, which is now based on the current "Jammy" tag. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-27CI: Switch to using coreboot from our imageTom Rini
Instead of downloading coreboot binaries from a Google drive location, use the ones we have built ourselves. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-27Dockerfile: Build coreboot from sourceTom Rini
To make CI runs rely less on external servers, build a coreboot release from source and populate /opt/coreboot with the output. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-26Prepare v2024.04-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-24Merge tag 'u-boot-imx-master-20240224' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx - Enable the thermal driver for the imx8m phycore boards. - Convert imx53-qsb to watchdog driver to fix the 'reset' command. - Remove multiline string from imx6dl-sielaff. - Add SPI boot support for imxrt1050-evk. - Convert opos6uldev to watchdog driver to fix the 'reset' command.
2024-02-24opos6uldev: Convert to watchdog driver modelSébastien Szymanski
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-02-24imx53-qsb: Convert to watchdog driver modelFabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2024-02-24imx8mm-phygate-tauri-l_defconfig: Enable CONFIG_IMX_TMUBenjamin Hahn
Enable the imx thermal driver to prevent booting when the system is too hot. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-02-24phycore-imx8mm_defconfig: Enable CONFIG_IMX_TMUBenjamin Hahn
Enable the imx thermal driver to prevent booting when the system is too hot. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-02-24phycore-imx8mp_defconfig: Enable CONFIG_IMX_TMUBenjamin Hahn
Enable the imx thermal driver to prevent booting when the system is too hot. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-02-24configs: imx93_var_som: Add fastboot support.Mathieu Othacehe
Enable the `fastboot` command. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-02-24configs: imx93_var_som: Add USB support.Mathieu Othacehe
Enable the `usb` command and some USB drivers. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-02-24arm: dts: imx93-var-som-symphony: Add USB support.Mathieu Othacehe
Enable both usbotg1 and usbotg2 ports. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-02-24arm: dts: imx93: Add USB support.Mathieu Othacehe
Copied from: https://lore.kernel.org/linux-devicetree/20240131114324.3722428-6-xu.yang_2@nxp.com/ Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-02-24board: imx6dl-sielaff: spl.c: Remove multiline stringFrieder Schrempf
Remove the malformed multiline string and fix the checkpatch warning. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2024-02-24imx: imxrt1050-evk: Add documentation for SPI bootJesse Taube
Add documentation for SPI boot. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2024-02-24imx: imxrt1050-evk: Add support for SPI flash bootingJesse Taube
Add support for booting the imxrt1050-evk from spi. Add imximage config and the ability for SPL to boot from NOR. Enable binman in Kconfig and device tree for imxrt* as it is used to prepend fspi_header.bin to SPL and u-boot.img. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2024-02-23Merge tag 'u-boot-amlogic-fixes-20240223' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - fix AVB oom error for Khadas VIM3 Android configs
2024-02-23configs: khadas-vim3*_android: fix AVB oom errorMattijs Korpershoek
When booting Android with AVB enabled, an OOM is observed: => avb init ${mmcdev} => avb verify _a ## Android Verified Boot 2.0 version 1.1.0 read_is_device_unlocked not supported yet read_rollback_index not supported yet avb_util.c:182: ERROR: Failed to allocate memory. OOM error occurred during verification A custom malloc length of 128MB is required as documented in commit 285a83b12bdf ("configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB") However, this 128M custom malloc length was not ported to Kconfig in commit 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Add it back to fix AVB verification on VIM3/VIM3L. Fixes: 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Co-developed-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209-vim3-avb-malloc-v1-1-91427d8c19ab@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-02-22Merge branch 'qcom-fixes-2024.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon - Two fixes for the qcom-pmic button driver
2024-02-20Merge patch series "board/ti: k3 boards: Stop using findfdt"Tom Rini
Nishanth Menon <nm@ti.com> says: This is a wide cleanup to switch to setting fdtfile using env_set instead of scripted magic. 'fdtfile' is expected to be set by default. This allows the stdboot triggered efi loaders to find the correct OS device tree file even if regular boot process is interrupted by user intervention.
2024-02-20include: env: ti: Drop default_findfdtNishanth Menon
We shouldn't need finfdt anymore. Drop the env script. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: beagle: beagleplay: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: j721s2: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: j721e: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am65x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am64x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am62x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. While at this, replace findfdt in environment with a warning as it is no longer needed Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am62ax: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. While at this, replace findfdt in environment with a warning as it is no longer needed Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: common: Introduce a common fdt ops libraryNishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards. The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: Add missing common/Kconfig referencesNishanth Menon
Add missing board/ti/common/Kconfig references for the platforms that missed it. The intent is for the common Kconfig to be usable across TI reference boards as required. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
2024-02-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 15:25:27 +0000