aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-22fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as longTom Rini
Otherwise: drivers/usb/gadget/f_fastboot.c:564:32: warning: format "%lx" expects argument of type "long unsigned int", but argument 3 has type "unsigned int" [-Wformat=] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-21Merge git://www.denx.de/git/u-boot-marvellTom Rini
2017-08-21Merge git://git.denx.de/u-boot-usbTom Rini
2017-08-21Merge git://git.denx.de/u-boot-uniphierTom Rini
- Fix unmet direct dependencies warning - Remove old sLD3 SoC support - Update reset data - Add dr_mode DT property to avoid warning
2017-08-21ARM: mvebu: set correct mem_size for db-88f6820-amcChris Packham
The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB DRAM. Update the board_topology_map to reflect the correct configuration. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-21doc: license: Add license header to the README.dfutftp fileLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-08-21fb_mmc.c: Correct blk_dread() return value checksTom Rini
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-21common/fb_mmc.c: Fix warnings about castsTom Rini
When building the flash zImage code on aarch64 we see warnings about pointer size casts. Use uintptr_t instead to correct these. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-By: Sam Protsenko <semen.protsenko@linaro.org>
2017-08-21fastboot: avoid printing invalid dataJohn Keeping
There is no guarantee that commands are null-terminated in the USB request buffer, so limit the length of data that is printed. Signed-off-by: John Keeping <john@metanate.com> Tested-by: Steve Rae <steve.rae@raedomain.com>
2017-08-21Fix fastboot boot addressPeter Chubb
Fastboot loads an image at CONFIG_FASTBOOT_BUF_ADDR, but currently tells do_bootm() to look for an image at $loadaddr. This breaks if CONFIG_FASTBOOT_BUF_ADDR is different from the current user-set loadaddr. Instead, tell do_bootm() to pick up the image where it was laoded. Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Steve Rae <steve.rae@raedomain.com>
2017-08-21usb: ehci: Convert CONFIG_USB_EHCI_PCI to KconfigBin Meng
This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates all boards that use it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-20env: Replace all open-coded gd->env_valid values with ENV_ flagsSimon Glass
Some of these were missed in the conversion. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-20env: Allow env_load() to detect errorsSimon Glass
Now that we have errors available in the environment driver's load() method, check the return valid. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-20env: Correct case of no sub-init functionTom Rini
With the change to the environment code to remove the common init stage of pointing to the default environment and setting it as valid, combined with the change to switch gd->env_valid from 0/1/2 to an enum we now must set env_valid to one of the enum values rather than an int. And in this case, not only was setting it to an int wrong, it was now the wrong value. Finally, in the case of ENV_IS_NOWHERE we must still say that our envionrment is invalid after init for things to continue to function. Fixes: 7938822a6b75 ("env: Drop common init() functions") Tested-by: Marek Vasut <marek.vasut@gmail.com> Reported-by: Marek Vasut <marek.vasut@gmail.com> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- Changes in v3: - Actually include changes for env/nowhere.c
2017-08-20ARM: dts: uniphier: add dr_mode property to dwc3 nodeMasahiro Yamada
Since commit 576e3cc700c5 ("usb: host: xhci-dwc3: Add dual role mode support from DT"), warning is displayed if dr_mode is not specified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20reset: uniphier: refactor reset data and add NAND/eMMC reset linesMasahiro Yamada
- Merge sys_reset data of LD4, Pro4, sLD8 and Pro5 - Merge sys_reset data of LD11 and LD20 - Use primitive UNIPHIER_RESETX() macro because bit assignments for system reset will be changed for every SoC in the future - Add NAND and eMMC resets Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"Masahiro Yamada
This reverts commit 82d075e79fa509ffb8ecd8dd2dc216929d6e8289. Commit 82d075e79fa5 ("ARM: uniphier: fix ROM boot mode for PH1-sLD3") was a workaround for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to simplify the init code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: move lowlevel debug init code after page table switch"Masahiro Yamada
This reverts commit bcc51c1512a3deb6a9fdd37362c6dde32ad3da23. Commit bcc51c1512a3 ("ARM: uniphier: move lowlevel debug init code after page table switch") was intended to support lowlevel debug for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to enable lowlevel debug earlier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20ARM: uniphier: remove sLD3 SoC supportMasahiro Yamada
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20clk: uniphier: fix unmet direct dependencies warningMasahiro Yamada
Since commit f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on SPL_DM"), the following warning is displayed: $ make uniphier_v8_defconfig warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects SPL_CLK which has unmet direct dependencies (CLK && SPL_DM) While I am here, I am removing the prompt to make it user-unconfigurable option so that "select CLK_UNIPHIER" can be omitted. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Fix 'notes' typosAnatolij Gustschin
s/notes/nodes Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-20env: Sort selection of default choicesAndy Shevchenko
It would be easier to catch out which platform is using which default. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-20arm, at91: fix taurus boardHeiko Schocher
since commit: b529993e0222 "spl: add hierarchical defaults for SPL_LDSCRIPT" taurus board stopped working. Use the ldscript from arch/arm/cpu/u-boot-spl.lds (as before this patch) fixed it. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-20common/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATAThomas Petazzoni
CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or platform, so support for it can be dropped. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-20ARM: hisilicon: hikey: Fix eMMC with latest ATF & U-BootPeter Griffin
ATF can leave the MMC IP in a state where U-Boot mmc driver can't enumerate the eMMC. This patch provides a mmc0_reset_clk() function like we already so do sd card controller which resets the IP when entering U-Boot. With this patch applied eMMC partitions are successfully enumerated again. => mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device => mmc part Partition Map for MMC device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x00000fff "vrl" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 496847ab-56a1-4cd5-a1ad-47f4acf055c9 2 0x00001000 0x000017ff "vrl_backup" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 61a36fc1-8efb-4899-84d8-b61642efa723 3 0x00001800 0x00001fff "mcuimage" <snip> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2017-08-20fs/fat: Correct blk_dread() return value checkTom Rini
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20spl: spl_mmc.c Correct blk_dread() return value checkTom Rini
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20cmd/read.c: Fix checking blk_dread return valueTom Rini
The function blk_dread will return -ENOSYS on failure or on success the number of blocks read, which must be the number asked to read (otherwise it failed somewhere). Correct this check. Reported-by: Coverity (CID: 166335) Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20mtdparts: Fix various issues reported by CoverityTom Rini
Now that sandbox is building cmd/mtdparts.c Coverity has looked at the code and found a number of issues. In index_partitions() it is possible that part will be NULL, so re-work the checks and debug statements to take this into account. We have a number of string buffers that we print to in the exact size of, and use string functions on, so we need to ensure they are large enough to be NULL terminated. In device_parse() it is not possible for num_partitions to be 0 (we would have hit a different error first) so remove logically dead code. Finally, in parse_mtdparts() if we have an error we need to free the memory allocated to dev. Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Coverity (CID: 166334, 166333, 166332, 166329, 166328) Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-20hash: Compile only hardware or software versions of SHA algorithmsTom Rini
Commit 089df18bfe9d ("lib: move hash CONFIG options to Kconfig") moved CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL config options to Kconfig. So in the case of SPL, CONFIG_SPL_HASH_SUPPORT enables CONFIG_SHA1 and CONFIG_SHA256 which enables SHA SW library by default. But in the case of platforms with SHA HW library support, SHA SW library becomes redundant and increases size of SPL by approx 18K. Rework the code so that we have named members and only have either software or hardware versions of the algorithm, depending on the relevant config options. Update the comment around hash_algo to reflect this as well. Reported-by: Sumit Garg <sumit.garg@nxp.com> Cc: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-20Makefile: honor PYTHON configuration properlyClément Bœsch
On some systems `python` is `python3` (for instance, Archlinux). The `PYTHON` variable can be used to point to `python2` to have a successful build. The use of `PYTHON` is currently limited in the Makefile and needs to be extended in other places: First, pylibfdt is required to be a Python 2 binding (binman imports pylibfdt and is only compatible Python 2), so its setup.py needs to be called accordingly. An alternative would be to change the libfdt setup.py shebang to python2, but the binding is actually portable. Also, it would break on system where there is no such thing as `python2`. Secondly, the libfdt import checks need to be done against Python 2 as well since the Python 2 compiled modules (in this case _libdft.so) can not be imported from Python 3. Note on the libfdt imports: "@if ! PYTHONPATH=tools $(PYTHON) -c 'import libfdt'; then..." is probably simpler than the currently sub-optimal pipe. Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
2017-08-19Merge git://git.denx.de/u-boot-videoTom Rini
2017-08-19lcd: avoid possible NULL dereferencexypron.glpk@gmx.de
Do not dereference bmp before the check if it is NULL. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
EFI Fixes for 2017.09: - Fix GOP w/o display - Fix LocateHandle - Fix exit return value truncation - Fix missing EFIAPI in efi_locate_handle (for x86)
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-coldfireTom Rini
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2017-08-18rockchip: rk322x: pinctrl: fix IO MASK error on sdcard pinKever Yang
Fix the IOMUX setting for SDcard CMD pin at the same time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: pinctrl: using compatible name same with dtsKever Yang
The dts from kernel is using rk3228-pinctrl as compatible name, need to sync with it to make the driver work. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: update MACRO for mmc clksel regKever Yang
The description for eMMC/SDIO/SDMMC src is not correct, update the CRU_CLKSEL11_CON value definition according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: update dram bank sizeKever Yang
The DRAM start address is not 0, so need to update the last bank size as: DRAM start addr + DRAM_SIZE - last bank start addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-18rockchip: rk3399: spl: remove unused header inclusionPhilipp Tomsich
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the '#include'-statement. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: dts: rk3399-evb: remove redundant gmac nodeKever Yang
There are two same gmac node, remove one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18efi_loader: do not cast return value in EFI_EXITxypron.glpk@gmx.de
UEFI API functions have different return types. Some return a value of type EFI_STATUS other don't. We therefore should not cast the return value of EFI_EXIT to another type than the expression passed to EFI_EXIT. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-08-18mmc: Support generic PCI SD host controllerBin Meng
This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of individual vendor id & device id pair to support generic PCI SD host controller. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-18m68k: add board stmark2, mcf5441x basedAngelo Dureghello
Sysam stmark2 board is a generic and fully (hw and sw) open board, with a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card as non volatile memories, and a wifi module included on-board. The board is actually used mainly for Coldfire custodian testing activity related to the mcf5441x Coldfire family. For further information please see: http://sysam.it/cff_stmark2.html Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes in v2: - remove CMD_REGINFO - add board information in commit message
2017-08-18m68k: mcf5445x: allow CS0 to be undefinedAngelo Dureghello
On some boards, CONFIG_SYS_CS0_BASE can be undefined, since CS0 is not connected to any signal. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-18m68k: fix cache.c for Coldfire V4EAngelo Dureghello
- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E - fix cache.c to properly enable/disable cache for V4E Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-18m68k: mcf5445x: move early ddr init as board-specificAngelo Dureghello
For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init is required. This patch moves this ddr/sdram early initalization away from start.S (to be board related). Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-17spl: fix Makefile for NOR, XIP and YMODEMPhilipp Tomsich
During the the conversion to $(SPL_TPL_), the SPL_ fragment was left over for the NOR, XIP and YMODEM boot methods in SPL, making these unselectable. This commit fixes this by dropping the spurious 'SPL_' fragment from each line. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: Bo Shen <voice.shen@gmail.com> Fixes: f94e643 (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 14:26:39 +0000