aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-28video: nexell: Drop unused and invalid codeSimon Glass
Unfortunately this driver uses the old video structure to store things. This is not supported with driver model. Drop the old code and comment out the other pieces, so the maintainer can take a look. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: siemens: Drop unused video codeSimon Glass
Drop this old code which is not built anymore, as it depends on CONFIG_VIDEO which has been removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop cfg_consoleSimon Glass
The non-driver model video support was removed two years ago. Drop this driver, which is only used by nokia_rx51. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini
Prepare v2022.04-rc5
2022-03-28Prepare v2022.04-rc5Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28Merge branch '2022-03-28-critical-fixes'Tom Rini
- A zstd, two Apple M1 and an MXS NAND critical bugfix - Clean up another file that wasn't being removed and update some external documentation links.
2022-03-28mtd: gpmi: fix the bch setting backward compatible issueHan Xu
Previous u-boot code changed the default bch setting behavior and caused backward compatible issue. This fix choose the legacy bch geometry back again as the default option. If the minimum ecc strength that NAND chips required need to be chosen, it can be enabled by either adding DT flag "fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The unused flag "fsl,legacy-bch-geometry" get removed. Fixes: 51cdf83eea (mtd: gpmi: provide the option to use legacy bch geometry) Fixes: 616f03daba (mtd: gpmi: change the BCH layout setting for large oob NAND) Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Han Xu <han.xu@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-28boot: image: fixup zstd decompression buffer initialization typoJérôme Carretero
The code was mistakenly initializing the input buffer twice. Tested to be working on BeagleBone by adjusting CONFIG_SYS_BOOTM_LEN to 64MiB (probably works with less) and preparing uImage with: cat arch/arm/boot/Image \ | zstd --ultra -22 --zstd=windowLog=22 \ > linux.bin.zst mkimage -A arm -T kernel uImage -C zstd -d linux.bin.zst \ -a 0x80008000 -e 0x80008000 Without the windowLog restriction, bootm fails with a zstd decompression error 7 (window too large), which I haven't troubleshooted. There should be a bit more documentation on the feature... Reviewed-by: Simon Glass <sjg@chromium.org> Fixes: 458b30af66c image: Update image_decomp() to avoid ifdefs
2022-03-28Fix URLs to old freescale git reposPali Rohár
Freescale git repos are now on source.codeaurora.org. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-03-28Makefile: add drivers/video/u_boot_logo.S to cleanHeinrich Schuchardt
make sandbox_defconfig make mrproper make tests fails with ../drivers/video/u_boot_logo.S: Assembler messages: ../drivers/video/u_boot_logo.S:5: Error: file not found: drivers/video/u_boot_logo.bmp We have to delete the generated file. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-28arm: apple: Fix mem layoutMark Kettenis
The current approach for setting the environment variables that describe the memory layout runs the risk of overlapping with reserved memory regions. Use the lmb code to derive the addresses for these variables instead. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-28arm: apple: Increase RTKit timeoutHector Martin
The firmware on larger NVMe drives needs more than 100ms to come up. Change the timeout to 1s. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-27Merge tag 'efi-2022-04-rc5-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-04-rc5-2 Documentation: * man-page for the wdt command UEFI: * Unit test for boot manager
2022-03-26cmd: efidebug: simplify do_efi_boot_add()Heinrich Schuchardt
When calling efi_dp_from_name() we are not interested in the device part. Just pass NULL as an argument. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26test: test UEFI boot managerHeinrich Schuchardt
Provide a unit test for * efidebug boot add * efidebug boot order * bootefi bootmgr * initrd via EFI_LOAD_FILE2_PROTOCOL Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26efi_loader: initrddump: drain input before promptHeinrich Schuchardt
Up to now the initrddump.efi application has drained the input after showing the prompt. This works for humans but leads to problems when automating testing. If the input is drained, this should be done before showing the prompt. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-03-26efi_loader: nocolor command line attr for initrddump.efiHeinrich Schuchardt
initrddump.efi uses colored output and clear the screen. This is not helpful for integration into Python tests. Allow specifying 'nocolor' in the load option data to suppress color output and clearing the screen. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26efi_loader: typo devie-pathHeinrich Schuchardt
%s/devie-path/device-path/ Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26doc: man-page for the wdt commandHeinrich Schuchardt
Describe the wdt command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-25Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Fix A20 GBit Ethernet operation - Update board .dts files to provide correct RGMII PHY mode
2022-03-26sunxi: dts: Update RGMII phy-mode propertiesAndre Przywara
Commit f11513d99787 ("net: phy: realtek: Add tx/rx delay config for 8211e") made the Realtek PHY driver honour the phy-mode DT property, to set up the proper delay scheme for the RX and TX lines. A similar change in the kernel revealed that those properties were mostly wrong. The kernel DTs got updated over the last few months, but we were missing out on the U-Boot version. Just sync in the phy-mode properties from the mainline kernel, v5.17-rc7, to avoid the breaking DT sync that late in the cycle. This fixes Ethernet operation on the affected boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
2022-03-26sunxi: Fix old GMAC pinmux setupAndre Przywara
Commit 5bc4cd05d7d4 ("sunxi: move non-essential code out of s_init()") moved the call to eth_init_board() from s_init() into board_init_f(). This means it's now only called from the SPL, which makes sense for most of the other moved low-level functions. However the GMAC pinmux and clock setup in eth_init_board() was not happy about that, so it broke the sun7i GMAC. Since Ethernet is of no use in the SPL anyway, just move the call into board_init(), which is only run in U-Boot proper. This fixes Ethernet operation for the A20 SoCs, which broke in v2022.04-rc1, with the above mentioned commit. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Petr Štetiar <ynezz@true.cz> [a20-olinuxino-lime2]
2022-03-25Merge branch '2022-03-25-assorted-updates' into nextTom Rini
- Assorted PCI cleanups - Allow building with -Og - ast2600 pwm support - PFUZE100 bootcount driver
2022-03-25bootcount: Add pmic pfuze100 bootcount driverPhilip Oberfichtner
Use the MEMA - MEMD registers on the PFUZE100 as bootcount registers. Based on work from Heiko Schocher <hs@denx.de>. Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-03-25power: pfuze100: Add MEMx register definitionsPhilip Oberfichtner
Add missing MEMA - MEMD register definitions for PFUZE100. Based on work from Heiko Schocher <hs@denx.de>. Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-03-25disk: Add an option for partitions in SPLSimon Glass
In some cases we do not want to enable partition support in SPL. Add an option to allow this. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-25ARM: dts: ast2600: Add PWM to device treeBilly Tsai
Add the PWM node and enable it for AST2600 EVB Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-03-25pinctrl: Add the pinctrl setting for PWM.Billy Tsai
This patchs add the signal description array for PWM pinctrl settings. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-03-25pwm: Add Aspeed ast2600 PWM supportBilly Tsai
This patch add the support of PWM controller which can be found at aspeed ast2600 soc. The pwm supoorts up to 16 channels and it's part function of multi-function device "pwm-tach controller". Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2022-03-25pci: Remove duplicate PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* macrosPali Rohár
Macros PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* are unused and are duplication of PCI_CLASS_* macros defined in pci_ids.h header file. So remove them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25sandbox: video: Replace PCI_CLASS_* macros by one from pci_ids.hPali Rohár
Replace old macros PCI_CLASS_CODE_COMM and PCI_CLASS_SUB_CODE_COMM_SERIAL by new macros defined in pci_ids.h. Old macros would be deleted in followup commit. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25pci: Add defines for normal and subtractive PCI bridgesPali Rohár
Add following two new PCI class codes defines into pci_ids.h include file: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE And use these defines in all U-Boot code for describing PCI class codes for normal and subtractive PCI bridges. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25Add option to use -OgSean Anderson
This adds support for using -Og when building U-Boot. According to the gcc man page: > -Og should be the optimization level of choice for the standard > edit-compile-debug cycle, offering a reasonable level of optimization > while maintaining fast compilation and a good debugging experience. This optimization level is roughly -O1 minus a few additional optimizations. It provides a noticably better debugging experience, with many fewer variables <optimized out>. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-25Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configsSean Anderson
This adds a separate CONFIG_CC_OPTIMIZE_FOR_SPEED option in a choice, in preparation for adding another optimization option. Also convert SH's makefile to use this new option. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-25doc: update doc/sphinx/requirements.txtHeinrich Schuchardt
Pin all dependencies as reported by 'pip freeze'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-03-25CI: Pin pylint version to 2.12.2Tom Rini
For consistency in runs, we need to always use the same pylint version. Pin to 2.12.2 as this is what we have been using so far. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Merge branch '2022-03-25-Kconfig-migrations' into nextTom Rini
- Merge a number of Kconfig migration patches
2022-03-25Convert CONFIG_BACKSIDE_L2_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BACKSIDE_L2_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25vinco: Remove CONFIG_ATMEL_SPI0Tom Rini
This is not referenced anywhere, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25lcd: Remove LCD_TEST_PATTERN codeTom Rini
This is a legacy driver and the value is set in board config headers without a CONFIG prefix. Remove the code. Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_LCD_INFO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LCD_INFO CONFIG_LCD_LOGO CONFIG_LCD_INFO_BELOW_LOGO CONFIG_LCD_IN_PSRAM Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_ATMEL_LCD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_GURNARD_SPLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_MII_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MII_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_PHY_RESET_DELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHY_RESET_DELAY Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_LPC32XX_ETH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LPC32XX_ETH Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_TFTP_PORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_RMII to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RMII Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:52:49 +0000