aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-20Nokia RX-51: Move board required options from defconfig to KconfigPali Rohár
Some of config options are board specific and should be set in into their default values automatically. So move them from defconfig file to Kconfig definitions to ensure that possible user custom defconfig files would have these required options also enabled. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20Nokia RX-51: Simplify calculation of attached kernel image addressPali Rohár
Now when board starup code does not copy image to CONFIG_SYS_TEXT_BASE address there is no need to calculate all addresses from base address at runtime. The only address which needs to be calculated is attached kernel image address which can be simplified at compile time without need to know CONFIG_SYS_TEXT_BASE address or relocation address at the runtime. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20Nokia RX-51: Simplify copy kernel codePali Rohár
Expression (r + (r0 - r1)) produce same result as (r - (r1 - r0)). So it does not matter which one is called. Always call the first option and remove second one. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20Nokia RX-51: Use U-Boot generic position independent codePali Rohár
Switch from custom board specific fixup/copy code to U-Boot generic position independent code provided by config option POSITION_INDEPENDENT. This also slightly decrease size of u-boot.bin binary (by 52 bytes). Note that option POSITION_INDEPENDENT increase size but not more than custom board fixup/copy code which is being deleted (as it is not needed anymore). Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20Nokia RX-51: Fix invalidating zImage kernel formatPali Rohár
Prior starting copy of kernel image to target location, invalidate also zImage magic header. This ensures that on target location would be image with valid header only in the case valid header was also in the source location and copy from source to target finished successfully. Copy is always skipped when kernel image in source location is invalid. Add also comment to the code which explain what is the code doing. Fixes: cc434fccba4c ("Nokia RX-51: Add support for booting kernel in zImage format") Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20arm: Set default MACH_TYPE in KconfigPali Rohár
For boards which requires correct MACH_TYPE, set their correct default values directly in Kconfig. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-08-20MAINTAINERS: Update email of Neil ArmstrongNeil Armstrong
My professional e-mail will change and the BayLibre one will bounce after mid-september of 2022. This updates the MAINTAINERS files and adds an entry in the .mailmap file. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-08-20Merge tag 'efi-2022-10-rc3-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-10-rc3-2 Documentation: * improve description of device probing * describe booting RISC-V with KVM and QEMU UEFI * fix Makefile for mkeficapsule
2022-08-20tools: mkeficapsule: use pkg-config for each lib separatHeiko Thiery
Call pkg-config for each library individually. This improves fallback handling. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fixes: 31a7688cbe0e ("tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls") Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-20efi_loader: disk: remove unused fieldAKASHI Takahiro
The field, ifname, in efi_disk_obj is set but never used anywhere. Just remove it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-20doc: dm: clarify activation.Michal Suchanek
Explain when devices should get activated. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-20doc: qemu-riscv: describe booting with QEMU and KVMHeinrich Schuchardt
The ELF U-Boot image produced by qemu-riscv64_smode_defconfig can be used to boot with QEMU and KVM. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-17Merge tag 'fsl-qoriq-2022-8-17' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq Enable SPL authentication for ls1021atwr Fdt fixups for ls1043ardb v7.0 board
2022-08-16board: ls1043ardb: fdt fixups for revision v7.0 boardsCamelia Groza
The LS1043ARDB rev v7.0 board replaces the AQR105 PHY on MAC9 with an AQR113C PHY. The address of the PHY on the MDIO bus changes from 0x1 to 0x8. Enable CONFIG_OF_BOARD_FIXUP and update both u-boot and Linux device trees to reflect this change. Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
2022-08-16ls1021atwr: caam: Enable Uboot validaion in SPL.Gaurav Jain
caam driver model enabled in spl for secure boot. fsl_rsa_mod_exp driver enabled in spl for validating uboot image. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-08-13Merge tag 'efi-2022-10-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-10-rc3 Documentation: * Add HTML documentation for patman * Improve binman documentation * Man-page for gpio UEFI: * move udevice pointer into struct efi_object * fix efi_convert_device_path_to_text() Other: * fs/erofs: silence messages from erofs_probe()
2022-08-13cmd: efidebug: Add missing \n at the end of messageMichal Simek
Currently message is not intended that prompt end up at the end of debug line. For example like this: DFU alt info setting: done DFU entities configuration failed! (partition table does not match dfu_alt_info?) Firmware update failed: <NULL> Cannot handle a capsule at 10000000Zynq> Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-08-13efi_loader: move udevice pointer into struct efi_objectMasahisa Kojima
This is a preparation patch to provide the unified method to access udevice pointer associated with the EFI handle by adding udevice pointer into struct efi_object. The patch also introduces a helper function efi_link_dev() to link the udevice and EFI handle. The EFI handles of both EFI block io driver implemented in lib/efi_loader/efi_disk.c and EFI block io driver implemented as EFI payload can access the udevice pointer in the struct efi_object. We can use this udevice pointer to get the U-Boot friendly block device name(e.g. mmc 0:1, nvme 0:1) through EFI handle. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13efi_loader: fix efi_convert_device_path_to_text()Heinrich Schuchardt
Ensure that the string we convert to UTF-16 is NUL terminated even if the device path only contains end nodes. Fixes: bd3d75bb0c58 ("efi_loader: multi part device paths to text") Addresses-Coverity: 350434 ("Uninitialized scalar variable") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13binman: Add more documentation about binman usageSimon Glass
This is an attempt to answer the comments provided by Xavier [1]. [1] https://lore.kernel.org/all/Yulcol7HpTHtjXTX@begut/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13binman: Add rST references for binman entry typesSimon Glass
Add references in the documentation for each entry type, so we can refer to them from other documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-13patman: Add documentation to doc/Simon Glass
Link to patman's documentation from the doc/ directory so that it appears in the 'make htmldocs' output. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13doc: Drop a reference to TravisSimon Glass
This was widely used by U-Boot for a long time, but is not used anymore, with Gitlab and Azure taking over. Drop the text. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-08-13doc: develop: Add a note about importing code from other projectsTom Rini
We talk about importing code from other projects in two places. The first place is in the coding style section, where we explain when to or not to deviate in terms of white space, etc. In the process documentation we now add a note about saying where the code was imported from and to ensure that you do not copy Signed-off-by or other tags. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13doc: crash_dumps.rst missing documentation linkHeinrich Schuchardt
Add link to usage/cmd/exception.rst. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13doc: add more details for crash dump analysisHeinrich Schuchardt
* describe crashs in UEFI binaries * provide architechture specific information for the sandbox and RISC-V Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13doc: man-page for gpio commandHeinrich Schuchardt
Provide a man-page for the gpio command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13bootstd: doc: Fix typosPaul Barker
These typos were found while reading the docs. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-08-13fs/erofs: silence erofs_probe()Heinrich Schuchardt
fs_set_blk_dev() probes all file-systems until it finds one that matches the volume. We do not expect any console output for non-matching file-systems. Convert error messages in erofs_read_superblock() to debug output. Fixes: 830613f8f5bb ("fs/erofs: add erofs filesystem support") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Huang Jianan <jnhuang95@gmail.com>
2022-08-13git-mailrc: remove invalid entry 'efi'Heinrich Schuchardt
Remove alias 'efi' with invalid data. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12Merge branch '2022-08-12-assorted-updates'Tom Rini
- Clean up some code with the DH electronics boards, remove a few boards that have had their removal ack'd, update Azure CI hosts for macOS and Ubuntu, and migrate a few more symbols to Kconfig.
2022-08-12net: Remove smc91111 ethernet driverTom Rini
This driver has not been converted to DM_ETH. The migration deadline passed 2 years ago. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: David Feng <fenghua@phytium.com.cn> Cc: Liviu Dudau <liviu.dudau@foss.arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-12arm: Remove snapper9260 boardTom Rini
This board is behind on several mandatory DM migrations and is missing OF_CONTROL support that makes other conversions impossible. Remove it. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12ppc: Remove ids8313 boardTom Rini
This board is behind on several mandatory DM migrations and is missing OF_CONTROL support that makes other conversions impossible. Remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2022-08-12Convert CONFIG_SYS_FDT_PAD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FDT_PAD Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12Convert CONFIG_SYS_FSL_QMAN_V3 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_PCIE_COMPAT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_PCIE_COMPAT To do this, introduce a choice and option for each of the strings used and set CONFIG_SYS_FSL_PCIE_COMPAT based on that. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_NUM_CC_PLLS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_NUM_CC_PLLS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_MAX_NUM_OF_SEC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_MAX_NUM_OF_SEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et alTom Rini
This removes the following symbols: CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_QSPI_LE CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR CONFIG_SYS_FSL_SRDS_NUM_PLLS CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_GP1DIR CONFIG_SYS_GP1ODR CONFIG_SYS_GP2DIR CONFIG_SYS_GP2ODR CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HMI_BASE FSL_QSPI_FLASH_NUM FSL_QSPI_FLASH_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12arc: Move SYS_LITTLE_ENDIAN / SYS_BIG_ENDIAN selection to KconfigTom Rini
We can determine which of these we need given CPU_BIG_ENDIAN being enabled or not, so move that logic to Kconfig from config.mk. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS And we remove the entries from the README for a number of already converted items. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12ARM: stm32: DH: Use common MAC address functionsPhilip Oberfichtner
To reduce code duplication, let the stm32 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner <pro@denx.de> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-08-12ARM: imx8: DH: Use common MAC address functionsPhilip Oberfichtner
To reduce code duplication, let the imx8 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner <pro@denx.de> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2022-08-12ARM: imx6: DH: Use common MAC address functionsPhilip Oberfichtner
To reduce code duplication, let the imx6 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner <pro@denx.de> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2022-08-12board: dhelectronics: Implement common MAC address functionsPhilip Oberfichtner
This is a starting point for unifying duplicate code in the DH board files. The functions for setting up MAC addresses are very similar for the i.MX6, i.MX8 and stm32mp1 based boards. All pre-existing implementations follow the same logic: (1) Check if ethaddr is already set in the environment (2) If not, try to get it from a board specific location (e.g. fuse) (3) If not, try to get it from eeprom After this commit, (1) and (3) are implemented as common functions, ready to be used by board specific files. Furthermore there is an implementation of (2) for imx based boards. Signed-off-by: Philip Oberfichtner <pro@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2022-08-12CI: Azure: Move to using macOS-12 imageTom Rini
As per https://github.com/actions/virtual-environments/issues/5583 the macOS-10.15 image is being deprecated. Move us up to macOS-12. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12CI: Azure: Move to Ubuntu 22.04 imageTom Rini
As per https://github.com/actions/runner-images/issues/6002 the Ubuntu 18.04 image is deprecated and will be removed by December 1, 2022. Move to the Ubuntu 22.04 image as our base for launching our containers from. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-12Merge branch '2022-08-11-verified-boot-for-embedded-initial-support'Tom Rini
To quote Simon: This adds the concept of a VBE method to U-Boot, along with an implementation of the 'VBE simple' method, basically a simple way of updating firmware in MMC from userspace and monitoring it from U-Boot. VBE simple is implemented in fwupd. U-Boot's role is to set up the device tree with the required firmware-update properties and provide the developer with information about the current VBE state. To that end this series includes a new 'vbe' command that allows VBE methods to be listed and examined. As part of this work, support for doing FDT fixups via the event interface is provided, along with the ability to write to the device tree via the ofnode interface. Another (significant) change is that bootmeths now have a 'global' flag, to allow the implementation of EFI bootmgr (and VBE) to be cleaned up. The 'system' bootdev is no-longer needed and these bootmeths are scanned first. Further work is needed to pull everything together, but this is a step along the way.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 02:44:59 +0000