aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-23net: lx2160a.c: Update to set ECx_PMUX precedenceRazvan Ionut Cirjan
As per hardware documentation, ECx_PMUX has precedence over SerDes protocol. For LX2160/LX2162 if DPMACs 17 and 18 are enabled as SGMII through SerDes protocol but ECx_PMUX configured them as RGMII, then the ports will be configured as RGMII and not SGMII. Signed-off-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23gpio: mpc8xxx: support fsl-layerscape platformhui.song
Make the MPC8XXX gpio driver to support the fsl-layerscape. Signed-off-by: hui.song <hui.song_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23configs: lx2160a: Enable OPTEE supportRuchika Gupta
Enable support to compile OPTEE driver, access AVB TA and RPMB API's access via RPC from OPTEE for lx2160 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23cmd: optee_rpmb command for read/write of rpmb from opteeRuchika Gupta
Enable "optee_rpmb" command to write/read named persistent values created on RPMB by opening session with OPTEE AVB TA. This provides easy test for establishing a session with OPTEE TA and storage of persistent data in MMC RPMB. It includes following subcommands: optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB TA Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: layerscape: add a way of specifying additional iommu mappingsLaurentiu Tudor
In the current implementation, u-boot creates iommu mappings only for PCI devices enumarated at boot time thus does not take into account more dynamic scenarios such as SR-IOV or PCI hot-plug. Add an u-boot env var and a device tree property (to be used for example in more static scenarios such as hardwired PCI endpoints that get initialized later in the system setup) that would allow two things: - for a SRIOV capable PCI EP identified by its B.D.F specify the maximum number of VFs that will ever be created for it - for hot-plug case, specify the B.D.F with which the device will show up on the PCI bus More details can be found in the included documentation: arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: add a few ARI related definesLaurentiu Tudor
Add a few defines related to PCI ARI configuration. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: layerscape: move pci node search in a common functionLaurentiu Tudor
Fix duplication of this code by placing it in a common function. Furthermore, the resulting function will be re-used in upcoming patches. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: layerscape: move per-pci device fdt fixup in a functionLaurentiu Tudor
Move the pci device related fdt fixup in a function in order to re-use it in a following patch. While at it, improve the error handling. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23configs: Enable NVME support for Layerscape platformsWasim Khan
Enable CONFIG_NVME and CONFIG_CMD_NVME for Layerscape platforms Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-22Merge branch '2020-10-22-misc-changes'Tom Rini
- Assorted updates for Xen, IPQ40xx, ASpeed, Keymile - Assorted typo / documentation fixes - Fix default preboot cmd to act like before with USB_STORAGE set - A number of other bugfixes throughout the code
2020-10-22rtc: move pcf8563 to KconfigHeiko Schocher
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22mmc: mtk-sd: change some dev_err into dev_dbgFabien Parent
dev_err has been used for debugging and a few dev_err message are printed for normal code execution. Make them dev_dbg instead. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22serial: serial_xen: add DEBUG_UART supportAKASHI Takahiro
By using a hypervisor call, we can implement DEBUG_UART on xen. This will allow us to see messages even earlier than serial_init(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-10-22xen: add definitions for console_ioAKASHI Takahiro
Those definitions added are used with HYPERVISOR_console_io(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22arch: arm/xen: add putc() for debuggingAKASHI Takahiro
This new function, xen_debug_putc(), is intended to be used to enable CONFIG_DEBUG_UART on xen guest. Please note that the underlying functionality in Xen is available only when Xen is configured with !NDEBUG but is much simpler than a generic HYPERVISOR_console_io(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22serial: serial_xen: print U-Boot banner and othersAKASHI Takahiro
At present, DM_FLAG_PRE_RELOC is set only if !OF_CONTROL. It doesn't make sense for this para-virtualized driver. With this patch applied, you will be able to see early boot messages: U-Boot 2020.10-00001-ge442e71a6c52-dirty (Oct 15 2020 - 11:02:25 +0900) xenguest Xen virtual CPU Model: XENVM-4.15 DRAM: 128 MiB PVBLOCK: (XEN) gnttab_mark_dirty not implemented yet pvblock: 0 In: hypervisor Out: hypervisor Err: hypervisor xenguest# Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22cosmetic: reset: ast2500: Rename driver and configsChia-Wei, Wang
1. Rename AST2500 reset driver from ast2500-reset.c to reset-ast2500.c 2. Rename AST2500 reset kconfig option from AST2500_RESET to RESET_AST2500 Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2020-10-22reset: ast2500: Use SCU for reset controlChia-Wei, Wang
The System Control Unit (SCU) controller of Aspeed SoCs provides the reset control for each peripheral. This patch refactors the reset method to leverage the SCU reset control. Thus the driver dependency on watchdog including dedicated WDT API and reset flag encoding can be eliminated. The Kconfig description is also updated accordingly. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2020-10-22clk: ccf: replace the get_rate helperDario Binacchi
The 12d152620d commit fixed the get_rate helper because the set_parent one did not re-parent the clock device to the new parent. The 4d139f3838 commit allows you to remove this workaround by calling the clk_get_parent_rate routine. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-10-22doc: dfu: fix typo in README.dfuChance.Yang
Fix "ram" typos for serial flash Signed-off-by: Chance.Yang <chance.yang@vatics.com>
2020-10-22log: Tidy up documentationSimon Glass
Fix up the documentation which was lost in a merge conflict in the conversion to RST. Fixes: 52d3df7fefe ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22ARM: mvebu: a38x: Fix comment typoNaoki Hayama
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22fs: btrfs: Fix typo in error messageNaoki Hayama
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Qu Wenruo <wqu@suse.com>
2020-10-22mmc: Fix comment typoNaoki Hayama
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGEPatrick Delaunay
Remove the default value "usb start" for CONFIG_USB_STORAGE as the USB storage boot initialization is correctly managed by distro boot command ('usb_boot' defined in include/config_distro_bootcmd.h already include the command 'usb start'). Fixes: 324d77998ed6 ("Define default CONFIG_PREBOOT with right config option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22gpio: fix gpio_request_by_name() descriptionDario Binacchi
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function desc parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22dm: core: improve uclass_get_device_by_phandle_id() descriptionDario Binacchi
Complete the devp parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22km/common: change ubicopy variableHolger Brunck
Instead having a hard coded value for "cramfsaddr" after compile time, we change it to take the variable "cramfsaddr" for the ubicopy variable. This makes sure that ubicopy uses the right address, even when the value for "cramfsaddr" has changed. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-22km: adapt defines and variables for new memory layoutHolger Brunck
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22lib: print_freq() should output kHz not KHzHeinrich Schuchardt
In the International System of Units (SI) the prefix kilo is abbreviated as 'k' not 'K'. 'K' is the symbol for Kelvin. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22IPQ40xx: Add PRNG supportRobert Marko
Since we now have the driver for Qualcomm PRNG HW, lets use it and add the necessary clocks and nodes. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22rng: Add Qualcomm MSM PRNG driverRobert Marko
Add support for the hardware pseudo random number generator found in Qualcomm SoC-s. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22IPQ40xx: Add support for MDIORobert Marko
Lets add the necessary DTS node and pinctrl properties for newly added MDIO driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22net: Add IPQ40xx MDIO driverRobert Marko
This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22IPQ40xx: Add SPI supportRobert Marko
Since we have SPI driver for IPQ40xx QUP SPI controller, lets add the necessary nodes, pinctrl and clocks. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22spi: Add Qualcomm QUP SPI controller driverRobert Marko
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22tools: image-host.c: use correct output formatHeinrich Schuchardt
When building on a 32bit host the following warning occurs: tools/image-host.c: In function ‘fit_image_read_data’: tools/image-host.c:296:56: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("File %s don't have the expected size (size=%ld, expected=%d)\n", ~~^ %lld filename, sbuf.st_size, expected_size); ~~~~~~~~~~~~ tools/image-host.c:311:62: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("Can't read all file %s (read %zd bytes, expexted %ld)\n", ~~^ %lld filename, n, sbuf.st_size); ~~~~~~~~~~~~ Fix the format strings. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22km: fix license string and compatible stringsHolger Brunck
As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-22README: Convert HTTP links to HTTPSNaoki Hayama
Convert all the other http:// links to https:// . www.denx.de/twiki/ seems to move to www.denx.de/wiki/ , so change it. I checked all links in this patch are valid. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: vxworks: Fix typo overwrideNaoki Hayama
%s/overwride/override/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: sandbox: Change reference to sandbox detailsNaoki Hayama
doc/arch/index.rst is a list of links to each architecture. As for the sandbox details, doc/arch/sandbox.rst looks better. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22README: Update directory hierarchyNaoki Hayama
Removed: - /arch/openrisc Added: - /arch/xtensa - /env Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update source code locationNaoki Hayama
This patch include these updates - Git repository has moved to GitLab - HTTPS access to the file server is allowed - pre-built images are no longer available Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update links to mailing list archivesNaoki Hayama
This patch includes these updates - Change http://lists.denx.de/pipermail/u-boot to https://lists.denx.de/pipermail/u-boot - http://dir.gmane.org/gmane.comp.boot-loaders.u-boot is broken, so remove it - Another archive https://marc.info/?l=u-boot is available, so add it Additional information: dir.gmane.org has moved to news.gmane.io, but it only allows access to the archive via NNTP. - Server: news.gmane.io - Group : gmane.comp.boot-loaders.u-boot I don't include this information in this patch because it's not very useful without web interfaces. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22timer: Return count from timer_ops.get_countSean Anderson
No timer drivers return an error from get_count. Instead of possibly returning an error, just return the count directly. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22doc: Document timer APISean Anderson
This adds kerneldocs for <timer.h>. I don't know who should maintain doc/api/timer.rst, since the timer subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left un-updated for the moment. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22cli_hush.c: remove broken sanity checkRasmus Villemoes
This code is intended do prevent one from setting a shell variable abc by doing abc=123 if an environment variable named abc already exists. However, the check is broken, since the env_get is done before the split on =, so we look up whether an environment variable "abc=123" exists, which is obviously never the case. One could move the code to below the split on =, but instead, just remove it, saving a little .text: The check has never worked as intended (it goes all the way back to the initial git commit), and it would anyway not guard against one first setting the shell variable, then doing 'env set abc xyz'. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-10-22common, autoboot: sync functionality with Kconfig descriptionHeiko Schocher
add back again special case: -2 autoboot with no delay and no check for abort as described in Kconfig option, see common/Kconfig help text for option BOOTDELAY. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22cosmetic: image: Fix comments and the order of definitionsNaoki Hayama
Fix some comments about functions. Move genimg_get_comp_name() above genimg_get_short_name() because genimg_get_comp_name() is related to get_table_entry_name(). Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 12:10:19 +0000