aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-05common lcd: simplify lcd_logoNikita Kiryanov
Simplify lcd_logo by extracting bmp unzip into its own function. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2012-09-04Merge branch 'master' of git://git.denx.de/u-boot-avr32Wolfgang Denk
* 'master' of git://git.denx.de/u-boot-avr32: net:macb: add line break avr32:portmux: fix setup for macb1 avr32: Remove redundant LDSCRIPT definition Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-03net:macb: add line breakAndreas Bießmann
Without this patch we see annoying output like this: ---8<--- U-Boot> dhcp macb1: PHY not foundmacb0: PHY present at 1 macb0: Starting autonegotiation... --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-03avr32:portmux: fix setup for macb1Andreas Bießmann
Use portd_mask instead of portc_mask to setup the pins for port D. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-03Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk
* 'master' of git://git.denx.de/u-boot-ubi: ubifs: Fix memory leak in ubifs_finddir Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-03Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk
* 'master' of git://git.denx.de/u-boot-cfi-flash: cfi: Make the flash erase and write operations abortable cfi: Check for blank before erase Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-03Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Canyonlands/Glacier: Squeeze NAND image a bit to fit again Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-03ubifs: Fix memory leak in ubifs_finddirStefan Roese
This patch fixes a memory leak in ubifs_finddir(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: dev.ma.dma@gmail.com
2012-09-03ppc4xx: Canyonlands/Glacier: Squeeze NAND image a bit to fit againStefan Roese
This patch removes some superfluous SDRAM init calls to fit the NAND_SPL image into 4k again. Signed-off-by: Stefan Roese <sr@denx.de>
2012-09-03cfi: Make the flash erase and write operations abortableJoe Hershberger
Check for ctrlc() in operations that take time and loop over the flash addresses. In netconsole, tstc() is expensive. Only check once in a while to not slow down the operation significantly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2012-09-03cfi: Check for blank before eraseJoe Hershberger
Added an optional check in the CFI driver to evaluate if the sector is already blank before issuing an erase command. Improves erase time by over a factor of 10 if already blank. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2012-09-02powerpc: re-add bi_ip_addr to bd_t structAnatolij Gustschin
Since commit 50a47d0523e8efebe912bef539a77ffd42116451 (net: punt bd->bi_ip_addr) booting old 2.4.x ppc kernels is broken due to changed offsets of the fields in struct bd_t. Offsets of the fields after removed bi_ip_addr are wrong, causing wrong bus clocks and console baudrate configurations and various other issues. Re-add the bi_ip_addr field to preserve backward compatibility with older ppc kernels. Setting bi_ip_addr in board.c is not really needed, grepping in the 2.4 linux tree shows that bi_ip_addr is not accessed there. Adding bi_ip_addr to struct bd_t for other arches isn't needed it seems. bd_t is not used by other arches in the 2.4 linux tree. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
2012-09-02hush: Don't parse the contents of a dereferenced varJoe Hershberger
When a variable which contains a user-supplied value is dereferenced (e.g. to be echo'ed), make sure that the value is not further parsed by hush. Set the hush local variable "HUSH_NO_EVAL=1" to enable this behavior. Without this patch, a sequence like this occurs: Panda # env set my_user_string Bob\'s favorite device Panda # print my_user_string my_user_string=Bob's favorite device Panda # echo $my_user_string syntax error hush.c:3007 With this patch, it looks like this: Panda # HUSH_NO_EVAL=1 Panda # env set my_user_string Bob\'s favorite device Panda # print my_user_string my_user_string=Bob's favorite device Panda # echo $my_user_string Bob's favorite device Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-02hush: Add default value substitution supportJoe Hershberger
Use standard sh syntax: ${VAR:-default} Use default value: if VAR is set and non-null, expands to $VAR. Otherwise, expands to default. ${VAR:=default} Set default value: if VAR is set and non-null, expands to $VAR. Otherwise, sets hush VAR to default and expands to default. ${VAR:+default} If VAR is set and non-null, expands to the empty string. Otherwise, expands to default. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-02README: Cleanup description of supported partitions.Karl O. Pinc
README: Cleanup description of supported partitions. Signed-off-by: Karl O. Pinc <kop@meme.com>
2012-09-02README.SPL: Move the 'Estimating stack usage' from omap3 to hereTom Rini
The instructions are generic, so move to the generic doc. Signed-off-by: Tom Rini <trini@ti.com>
2012-09-02README.SPL: Add a small Debugging sectionTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2012-09-02README: Update ver env var descriptionBenoît Thébaudeau
Commit 155cb01 replaced the read-only property of the ver env var with an auto-restoring behavior. Update the README file accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02dm: Add twserial device documentTomáš Hlaváček
Signed-off-by: Tomas Hlavacek<tmshlvck@gmail.com>
2012-09-02dm: RTC subsystem analysis added.Tomas Hlavacek
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2012-09-02dm: Add pcmcia design documentViktor Krivak
Signed-off-by: Viktor Krivak <viktor.krivak@gmail.com>
2012-09-02dm: add PCI design documentPavel Herrmann
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-09-02dm: Driver model analysis document for Watchdog subsystem has been added.Tomas Hlavacek
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2012-09-02dm: Hwmon UDM subsystem analysis added.Tomas Hlavacek
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2012-09-02dm: Add POWER API transition documentViktor Krivak
Signed-off-by: Viktor Krivak <viktor.krivak@gmail.com>
2012-09-02dm: Add block device documentPavel Herrmann
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-09-02dm: Add SPI API transition documentViktor Krivak
Signed-off-by: Viktor Krivak <viktor.krivak@gmail.com>
2012-09-02dm: Add networking subsystem analysisMarek Vasut
Signed-off-by: Marek Vasut <marex@denx.de>
2012-09-02dm: Add MMC subsystem analysisMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2012-09-02dm: Add GPIO API transition documentViktor Křivák
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
2012-09-02dm: Add Driver cores design documentPavel Herrmann
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-09-02dm: Initial import of design documentsMarek Vasut
This patch contains UDM-design.txt, which is document containing general description of the driver model. The remaining files contains descriptions of conversion process of particular subsystems. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2012-09-02input: key_matrix: fix header inclusionStephan Linz
On Microblaze with device tree support enabled we run into the error below. I'm not sure, but I think that all source code should include at least the common.h and just this fix the problem on Microblaz architecture. The error is: In file included from key_matrix.c:29: include/malloc.h:364: error: conflicting types for 'memset' include/linux/string.h:71: error: previous declaration of 'memset' was here include/malloc.h:365: error: conflicting types for 'memcpy' include/linux/string.h:74: error: previous declaration of 'memcpy' was here Signed-off-by: Stephan Linz <linz@li-pro.net> CC: Bernie Thompson <bhthompson@chromium.org> CC: Simon Glass <sjg@chromium.org> CC: Tom Warren <twarren@nvidia.com> CC: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <monstr@monstr.eu>
2012-09-02fix out of tree building with kallsymsMike Frysinger
The call to SYSTEM_MAP assumes that the u-boot output is in $PWD when it really should be in $(obj). This fixes building out of tree. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-09-02env_nand: align NAND buffersStephen Warren
This allows cache flush/invalidate operations to succeed on the buffers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Scott Wood <scottwood@freescale.com>
2012-09-02image/FIT: Add ramdisk load, entry address and OS tag inclusionJagannadha Sutradharudu Teki
This patch adds support to include Load, Entry address and OS tag of ramdisk on to FIT image through mkimage tool. Signed-off-by: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
2012-09-02rtc: pcf8563: Make century compatible with LinuxBenoît Thébaudeau
This driver uses the century bit of this RTC in the opposite way Linux does. From Linux's rtc-pcf8563.c: /* * The meaning of MO_C bit varies by the chip type. * From PCF8563 datasheet: this bit is toggled when the years * register overflows from 99 to 00 * 0 indicates the century is 20xx * 1 indicates the century is 19xx * From RTC8564 datasheet: this bit indicates change of * century. When the year digit data overflows from 99 to 00, * this bit is set. By presetting it to 0 while still in the * 20th century, it will be set in year 2000, ... * There seems no reliable way to know how the system use this * bit. So let's do it heuristically, assuming we are live in * 1970...2069. */ As U-Boot's PCF8563 driver does not say it is supposed to support the RTC8564, make this driver compatible with Linux's by giving the opposite meaning to the century bit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: Simplify get_contentsBenoît Thébaudeau
One call to get_cluster can be factorized with another, so avoid duplicating code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: get_cluster: Add buffer bouncingBenoît Thébaudeau
Add a buffer bouncing mechanism to get_cluster. This can be useful for misaligned applicative buffers passed through get_contents. This is required for the following patches in the case of data aligned differently relatively to buffers and clusters. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: Fix redundant sector readBenoît Thébaudeau
With the previous code, the remaining prefetched sectors were read again after each sector. With this patch, each sector is read only once, thus making the prefetch useful. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: cosmetic: Remove useless assignmentBenoît Thébaudeau
fatlength is not used after this assignment, so it is useless and can be removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: get_fatent: Fix FAT boundary checkBenoît Thébaudeau
startblock must be taken into account in order not to read past the end of the FAT. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02FAT: cosmetic: Remove extra spacesBenoît Thébaudeau
Remove spaces before opening parentheses in function calls. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02ppc: Create a stack frame for wait_ticks()Joakim Tjernlund
wait_ticks() calls get_ticks() without building a back chain which makes gdb unhappy when doing back trace. This can also cause improper memory accesses. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2012-09-02part_mac: dcache: allocate cacheline-aligned buffersBenoît Thébaudeau
This patch forces the correct alignment for DMA operations of buffers used by part_mac.c. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-02mmc: Remove unused item flags in struct mmc_cmdKaspter Ju
Signed-off-by: Kaspter Ju <nigh0st3018@gmail.com>
2012-09-02u-boot yaffs2: Fix compilation warningsCharles Manning
Also remove yaffs_hweight and use the hweight in u-boot. Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2012-09-02Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
* 'master' of git://git.denx.de/u-boot-usb: MUSB driver: Timeout is never detected as the while loop does not end usb: fix ulpi_set_vbus prototype pxa25x: Add UDC registers definitions USB: Fix strict aliasing in ohci-hcd usb: Optimize USB storage read/write ehci: Optimize qTD allocations usb_stor_BBB_transport: Do not delay when not required usb_storage: Remove EHCI constraints usb_storage: Restore non-EHCI support ehci-hcd: Boost transfer speed ehci: cosmetic: Define used constants ehci: Fail for multi-transaction interrupt transfers arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS arm:trats: Support for USB UDC driver at TRATS board. dfu:cmd: Support for DFU u-boot command dfu: MMC specific routines for DFU operation dfu: DFU backend implementation dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget dfu:usb: Support for g_dnl composite download gadget. ehci: cosmetic: Define the number of qt_buffers Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-02patman: Do not Cc addresses included in To listOtavio Salvador
In case an address is listed in the To list, those will be skipped on Cc list or user might end with a duplicated message. This fixes the case when a tag points to same address used as series destination thus avoiding duplicated sending. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-02patman: Allow for changelog use in first version of a seriesOtavio Salvador
When a patchset had a RFC series, a v1 might have a changelog of changes done since the RFC. The patch changes the range checked for changelog and allow it to start for version 1. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 07:40:46 +0000