aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-15dt-bindings: fsp: Fix Apollo Lake FSP-S devicetree bindingsWolfgang Wallner
An entry is missing in the FSP-S devicetree bindings, and as a result the description for the next few following entries is off by one line. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-13Merge branch '2021-04-13-assorted-improvements'Tom Rini
- A large assortment of bug fixes, code cleanups and a few feature enhancements.
2021-04-12cmd: exit: Fix return valueMarek Vasut
In case exit is called in a script without parameter, the command returns -2 ; in case exit is called with a numerical parameter, the command returns -2 and lower. This leads to the following problem: => setenv foo 'echo bar ; exit 1' ; run foo ; echo $? bar 0 => setenv foo 'echo bar ; exit 0' ; run foo ; echo $? bar 0 => setenv foo 'echo bar ; exit -2' ; run foo ; echo $? bar 0 That is, no matter what the 'exit' command argument is, the return value is always 0 and so it is not possible to use script return value in subsequent tests. Fix this and simplify the exit command such that if exit is called with no argument, the command returns 0, just like 'true' in cmd/test.c. In case the command is called with any argument that is positive integer, the argument is set as return value. => setenv foo 'echo bar ; exit 1' ; run foo ; echo $? bar 1 => setenv foo 'echo bar ; exit 0' ; run foo ; echo $? bar 0 => setenv foo 'echo bar ; exit -2' ; run foo ; echo $? bar 0 Note that this does change ABI established in 2004 , although it is unclear whether that ABI was originally OK or not. Fixes: c26e454dfc6 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Tom Rini <trini@konsulko.com>
2021-04-12scmi: translate the resource only when livetree is not activatedPatrick Delaunay
Call the translation function on the ofnode_read_resource result only when the livetree is not activated. Today of_address_to_resource() calls ofnode_read_resource() for livetree support and fdt_get_resource() when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required when livetree is activated but this address translation is already done by ofnode_read_resource(). Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-12gpio: Drop dm_gpio_set_dir()Simon Glass
This function is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-12gpio: i2c-gpio: Drop use of dm_gpio_set_dir()Simon Glass
This is the only driver that uses this function. Update it to use the alternative which is dm_gpio_clrset_flags(). Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Harm Berntsen <harm.berntsen@nedap.com>
2021-04-12qemu: arm: select QFW, MMIO on qemu-armAsherah Connor
Select CMD_QFW and QFW_MMIO in the qemu-arm board (covers arm and arm64). Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12qemu: add MMIO driver for QFWAsherah Connor
Add MMIO driver for QFW. Note that there is no consumer as of this patch. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12test: qemu: add qfw sandbox driver, dm tests, qemu testsAsherah Connor
A sandbox driver and test are added for the qfw uclass, and a test in QEMU added for qfw functionality to confirm it doesn't break in real world use. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12x86: qemu: move QFW to its own uclassAsherah Connor
We move qfw into its own uclass and split the PIO functions into a specific driver for that uclass. The PIO driver is selected in the qemu-x86 board config (this covers x86 and x86_64). include/qfw.h is cleaned up and documentation added. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12scmi: correctly configure MMU for SCMI bufferPatrick Delaunay
Align the MMU area for SCMI shared buffer on section size; use the ALIGN macro in mmu_set_region_dcache_behaviour call. Since commit d877f8fd0f09 ("arm: provide a function for boards init code to modify MMU virtual-physical map") the parameter of mmu_set_region_dcache_behaviour need to be MMU_SECTION_SIZE aligned. Fixes: 240720e9052f ("firmware: scmi: mailbox/smt agent device") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-12moveconfig.py: add to the "do not process" listTrevor Woerner
Skip the processing of *.aml and *.dat files while iterating through the source in order to process header files. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-12checkpatch: Add warnings for using strn(cat|cpy)Sean Anderson
strn(cat|cpy) has a bad habit of not nul-terminating the destination, resulting in constructions like strncpy(foo, bar, sizeof(foo) - 1); foo[sizeof(foo) - 1] = '\0'; However, it is very easy to forget about this behavior and accidentally leave a string unterminated. This has shown up in some recent coverity scans [1, 2] (including code recently touched by yours truly). Fortunately, the guys at OpenBSD came up with strl(cat|cpy), which always nul-terminate strings. These functions are already in U-Boot, so we should encourage new code to use them instead of strn(cat|cpy). [1] https://lists.denx.de/pipermail/u-boot/2021-March/442888.html [2] https://lists.denx.de/pipermail/u-boot/2021-January/438073.html Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12fastboot: Fix possible buffer overrunSean Anderson
This fixes several uses of strn(cpy|cat) which did not terminate their destinations properly. Fixes de1728ce4c ("fastboot: Allow u-boot-style partitions") Reported-by: Coverity Scan Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-04-12test: Add test for strlcatSean Anderson
This test is adapted from glibc, which is very concerned about alignment. It also tests strlcpy by dependency. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12lib: string: Implement strlcatSean Anderson
This introduces strlcat, which provides a safer interface than strncat. It never copies more than its size bytes, including the terminating nul. In addition, it never reads past dest[size - 1], even if dest is not nul-terminated. This also removes the stub for dwc3 now that we have a proper implementation. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12lib: string: Fix strlcpy return valueSean Anderson
strlcpy should always return the number of bytes copied. We were accidentally missing the nul-terminator. We also always used to return a non-zero value, even if we did not actually copy anything. Fixes: 23cd138503 ("Integrate USB gadget layer and USB CDC driver layer") Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-04-12tee: optee: Change printing during optee_probeIlias Apalodimas
Right now the error messages when optee has a version mismatch or shared memory is not configured are done with a debug(). That's not very convenient since you have to enable debugging to figure out what's going on, although this is an actual error. So let's switch the debug() -> dev_err() and report those explicitly. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-12terminal: only serial_reinit_all if availableAsherah Connor
serial_reinit_all() is only available if CONFIG_SERIAL is defined (i.e. !CONFIG_DM_SERIAL). Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12terminal: correct stdio_dev invocationsAsherah Connor
stdio_dev methods have taken a pointer to themselves since 709ea543 (nearly 7 years ago). Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12rtc: add support for rv3028 rtcHeiko Schocher
Add support for rtc3028 rtc from microcrystal. based on linux dirver: commit a38fd8748464: ("Linux 5.12-rc2") Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-12test: scmi: add local variables for scmi agent referenceEtienne Carriere
Add local variables agent0/agent1 to refer to SCMI sandbox context agent and ease readability of the test. For consistency, rename regul_dev to regul0_dev and remove sandbox_voltd in dm_test_scmi_voltage_domains(). Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12firmware: scmi: fix inline comments and minor coding style issuesEtienne Carriere
Fix inline comments and empty line in scmi driver and test files. Remove test on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c since these configuration are expected enabled when CONFIG_FIRMWARE_SCMI is enabled in sandbox configuration. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12firmware: scmi: sandbox test for voltage regulatorEtienne Carriere
Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12firmware: scmi: voltage regulatorEtienne Carriere
Implement voltage regulators interfaced by the SCMI voltage domain protocol. The DT bindings are defined in the Linux kernel since SCMI voltage domain and regulators patches [1] and [2] integration in v5.11-rc7. Link: [1] https://github.com/torvalds/linux/commit/0f80fcec08e9c50b8d2992cf26495673765ebaba Link: [2] https://github.com/torvalds/linux/commit/2add5cacff3531e54c50b0832128299faa9f0563 Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12disk: gpt: verify alternate LBA points to last usable LBAStefan Herbrechtsmeier
The gpt command require the GPT backup header at the standard location at the end of the device. Check the alternate LBA value before reading the GPT backup header from the last usable LBA of the device. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12cmd: xtrace: Convert to boolSean Anderson
This variable is a boolean, not a string. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12pci: Mark 64bit Memory BARs as suchPhil Sutter
Just a bit more info to the reader. Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-12hush: Fix assignments being misinterpreted as commandsSean Anderson
If there were no variable substitutions in a command, then initial assignments would be misinterpreted as commands, instead of being skipped over. This is demonstrated by the following example: => foo=bar echo baz Unknown command 'foo=bar' - try 'help' Signed-off-by: Sean Anderson <seanga2@gmail.com>
2021-04-12mtd: Update fail_addr when erase fails due to bad blocksFarhan Ali
For all other erase failures, the fail_addr is updated with the failing address. Only in the case of erase failure due to bad block detection, the fail_addr is not updated. This change simply updates the fail_addr for this specific scenario so that it is consistent with the rest of the code. Signed-off-by: Farhan Ali <farhan.ali@broadcom.com>
2021-04-12Tegra: remove e2220-1170 boardPeter Robinson
It's an old bringup board with out upstream Linux or L4T support Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2021-04-12bootm: do not hang on failureHeinrich Schuchardt
On ARMv8 systems load mmc 0:1 $loadaddr vmlinuz-5.10.0-3-arm64 booti leads to a hanging system requiring to physically reset the system: FDT and ATAGS support not compiled in - hanging ### ERROR ### Please RESET the board ### For systems where physical access is difficult hanging is a poor choice. It is preferable to reset the system when U-Boot reaches a state that is not recoverable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12hash: Allow for SHA512 hardware implementationsJoel Stanley
Similar to support for SHA1 and SHA256, allow the use of hardware hashing engine by enabling the algorithm and setting CONFIG_SHA_HW_ACCEL / CONFIG_SHA_PROG_HW_ACCEL. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-12hw_sha: Fix coding style errorsJoel Stanley
Checkpatch complains about: ERROR: "foo * bar" should be "foo *bar" and CHECK: Alignment should match open parenthesis Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-12lib: optee: migration optee_copy_fdt_nodes for OF_LIVE supportPatrick Delaunay
The optee_copy_fdt_nodes is only used to copy op-tee nodes of U-Boot device tree (from gd->fdt_blob when OF_LIVE is not activated) to external device tree but it is not compatible with OF_LIVE. This patch migrates all used function fdt_ functions to read node on old_blob to ofnode functions, compatible with OF_LIVE and remove this parameter "old_blob". The generated "device tree" is checked on stm32mp platform with OF_LIVE activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-12power: pmic: remove pmic_max77696.c fileJaehoon Chung
Remove pmic_max77696.c file. The maintaining pmic_max77696.c file is useless. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12board: warp: add power_max77696_init() functionJaehoon Chung
Add power_max77696_init() function. Since warp doesn't support DM, the keeping its code in board file is better than maintainig the file of driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-11Merge branch '2021-04-11-remove-non-migrated-boards'Tom Rini
- Remove a large number of boards that have not migrated to DM_MMC, for which the migration deadline with 2 years ago at v2019.04.
2021-04-11Merge tag 'video-2021-07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video - rk3399 eDP support - pwm backlight without a known period_ns - add Chrome OS EC PWM driver - Kconfig SIMPLE_PANEL DM_GPIO dependency - remove mb862xx driver remnants - fix KiB format in reserve_video() debug trace - fix tegra124 sor CSTM LVDS_EN_ENABLE/DISABLE config - fix line padding calculation for 16 and 24 BPP bitmaps
2021-04-10Merge tag 'efi-2021-07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-07-rc1 Bug fixes: * support EFI, HOST, VIRTIO in fsinfo command * simplify efi_get_device_path_text() * add missing EFI_UNACCEPTED_MEMORY_TYPE * mkeficapsule: improve online help * avoid several build warnings Documentation: * UEFI documentation for initrd loading options * describe building OP-TEE with for UEFI variables * mmc man-page
2021-04-10ppc: Remove MPC837XEMDS boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10video: Fix line padding calculation for 16 and 24 BPP bitmapsSylwester Nawrocki
Each row in the pixel array in the bitmap file is padded if necessary so the row size is always a multiple of 4 bytes. In current code the complement of row size to a multiple of 4 bytes is further unnecessarily multiplied by the pixel size. This results in incorrect displaying of bitmaps having row size that is not a multiple of 4 bytes. Fix this by removing the unnecessary multiplication. Tested with 24BPP bitmap and XRGB32 display. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-10tegra: video: fix tegra_dc_sor_config_panel()Heinrich Schuchardt
Bitwise OR has a higher operator precedence than the ternary conditional. Add the missing parentheses. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-10board_f: cosmetic: change the debug trace to KB in reserve_videoPatrick Delaunay
Update the debug trace for the reserved video memory to KB as indicated in the message with "%luk"; before the patch the computed size gd->relocaddr - addr is in bytes. This patch aligns the debug trace in reserve_video() with others functions, for example on stm32mp157c-dk2: - Reserving 3080192k for video at: dfd00000 + Reserving 3008k for video at: dfd00000 Reserving 873k for U-Boot at: dfc25000 Reserving 32776k for malloc() at: ddc23000 Reserving 72 Bytes for Board Info at: ddc22fb0 Reserving 280 Bytes for Global Data at: ddc22e90 Reserving 119072 Bytes for FDT at: ddc05d70 Reserving 0x278 Bytes for bootstage at: ddc05af0 Fixes: 5630d2fbc50f3035 ("board: Show memory for frame buffers") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-10finish removing mb862xx video driverTrevor Woerner
drivers/video/mb862xx.c was removed in commit 9c1e098fb92de38f0017585658dd50c3009c84ab from December 2020, however, this last little remnant in drivers/video/cfb_console.c remained. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-10video: SIMPLE_PANEL depends on DM_GPIOAsherah Connor
SIMPLE_PANEL currently only depends on PANEL && BACKLIGHT, but the code makes references to dm_gpio_set_value and gpio_request_by_name. These are defined in drivers/gpio/gpio-uclass.c, so a dependency on DM_GPIO corrects these link errors: aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_set_backlight': /home/kameliya/u-boot/drivers/video/simple_panel.c:42: undefined reference to `dm_gpio_set_value' aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_enable_backlight': /home/kameliya/u-boot/drivers/video/simple_panel.c:27: undefined reference to `dm_gpio_set_value' aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_of_to_plat': /home/kameliya/u-boot/drivers/video/simple_panel.c:72: undefined reference to `gpio_request_by_name' This issue is only exposed if you have a board which enables CONFIG_DM_VIDEO without CONFIG_DM_GPIO; so far, none do, but soon a QEMU board may. Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
2021-04-10pwm: Add a driver for Chrome OS EC PWMAlper Nebi Yasak
This PWM is used in rk3399-gru-bob and rk3399-gru-kevin to control the display brightness. We can only change the duty cycle, so on set_config() we just try to match the duty cycle that dividing duty_ns by period_ns gives us. To disable, we set the duty cycle to zero while keeping the old value for when we want to re-enable it. The cros_ec_set_pwm_duty() function is taken from Depthcharge's cros_ec_set_bl_pwm_duty() but modified to use the generic pwm type. The driver itself is very loosely based on rk_pwm.c for the general pwm driver structure. The devicetree binding file is from Linux, before it was converted to YAML at 5df5a577a6b4 ("dt-bindings: pwm: Convert google,cros-ec-pwm.txt to YAML format") in their repo. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-10video: backlight: Support PWMs without a known period_nsAlper Nebi Yasak
The PWM device provided by Chrome OS EC doesn't really support anything other than setting a relative duty cycle. To support it as a backlight, this patch makes the PWM period optional in the device tree and pretends the valid brightness range is its period_ns. Also adds a sandbox test for a PWM channel that has a fixed period, checking that the resulting duty_cycle matches on a set_config() even if the requested period_ns can't be set. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-10ppc: Remove Cyrus_P5020 and P5040 boardsTom Rini
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming <afleming@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10ppc: Remove ARCH_P1022 supportTom Rini
With the last of the ARCH_P1022 platforms removed, finish removing the rest of the platform support. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 14:10:43 +0000