aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-25x86: zimage: Use a state struct to hold the stateSimon Glass
At present the 'zboot' command does everything in one go. It would be better if it supported sub-commands like bootm, so it is possible to examine what will be booted before actually booting it. In preparation for this, move the 'state' of the command into a struct. This will allow it to be shared among multiple functions in this file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-25x86: Update the bootparam headerSimon Glass
This header is missing a few of the newer features from the specification. Add these as well as a link to the spec. Also use the BIT() macros where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-24Merge branch 'mpc85xx-for-v2021.01' into nextTom Rini
- Add DM_SPI, DM_SPI_FLASH support for powerpc platforms - Add DM_ETH support on P1010RDB, P1020RDB, P2020RDB - Remove some un-maintained powerpc platforms - Add USB_STORAGE support in config
2020-09-24configs: powerpc: add usb (host) mass storage supportRan Wang
commit 0cfccb54014b ("configs: Resync with savedefconfig") removed CONFIG_USB_STORAGE from some powerpc platforms' defconfig files, whicih would block the use case of system loading rootfs from USB drives, add them back. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P5040DS secure boot configsPriyanka Jain
Remove NXP powerpc P5040DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P5020DS board supportPriyanka Jain
Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24powerpc:Remove P4080DS secure boot configsPriyanka Jain
Remove NXP powerpc P4080DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P3041DS secure boot configsPriyanka Jain
Remove NXP powerpc P3041DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1024RDB board supportPriyanka Jain
Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1021RDB board supportPriyanka Jain
Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020MBG board supportPriyanka Jain
Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020UTM board supportPriyanka Jain
Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1025RDB board supportPriyanka Jain
Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P1010RDB secure boot configsPriyanka Jain
Remove NXP powerpc P1010RDB secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove p1023rdb board supportPriyanka Jain
Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P2020RDB: Enable DM_ETH configHou Zhiqiang
Enable the DM_ETH and DM_MDIO config. On P2020RDB, the eTSEC1 is connecting with a switch VSC7385, so also enable the fixed PHY support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: powerpc: p2020rdb: Add eTSEC DT nodesHou Zhiqiang
P2020RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII switch VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1010RDB: Enable DM_ETH configHou Zhiqiang
Enable the DM_ETH and DM_MDIO config. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1010rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: powerpc: p1010rdb: Add eTSEC DT nodesHou Zhiqiang
P1010RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII PHY AR8033 eTSEC2: Connected to SGMII PHY AR8033 eTSEC3: Connected to SGMII PHY AR8033 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1020RDB: Enable DM_ETH configHou Zhiqiang
Enable the DM_ETH and DM_MDIO config. On P1020RDB, the eTSEC1 is connecting with a switch VSC7385, so also enable the fixed PHY support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1_p2_rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: powerpc: p1020rdb: Add eTSEC DT nodesHou Zhiqiang
P1020RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII switch VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: p1_p2_rdb: Add the default address of vsc7385 firmwareHou Zhiqiang
Add the environment 'vscfw_addr' to assign a default address for vsc7385 firmware uploading. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()Hou Zhiqiang
Move vsc7835 firmware uploading to board_early_init_r(), so that the switch also can work in DM eTSEC driver. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24mpc8xxx: Don't compile board_eth_init() for DM_ETHHou Zhiqiang
The cpu_eth_init() is only used by the legacy ethernet driver framework. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24net: tsec: Add the compatible string "gianfar" supportHou Zhiqiang
Add compatible string "gianfar" support and update the device-tree-bindings doc. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24net: tsec: Add fixed-link PHY supportHou Zhiqiang
The info of fixed-link PHY is described in DT node instead of getting from MII, so detect the fixed-link PHY DT node first, if it doesn't exist then probe the MII. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24net: tsec: convert to use DM_MDIO when DM_ETH enabledHou Zhiqiang
For the platforms on which the eTSEC driver uses DM_ETH, convert its MDIO controller code to also use DM_MDIO. Note that for handling the TBI PHY (the MAC PCS for SGMII), we still don't register a udevice for it, since we can drive it locally and there is no point in doing otherwise. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Reworked to fix gazerbeam config] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24net: fsl_mdio: Correct the MII management register block addressHou Zhiqiang
The MII management register block offset is different between gianfar and etsec2 compatible devices, this patch is to fix this issue by adding driver data for different compatible string. Fixes: 2932c5a802a9 ("net: tsec: fsl_mdio: add DM MDIO support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24net: fsl_mdio: Change to use virtual addressHou Zhiqiang
Use virtual address to access the MII block registers instead of physical address. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSNVladimir Oltean
The tsec driver now requires DM_MDIO when DM_ETH is enabled. To avoid build errors, enable DM_MDIO in these boards' configs before we actually add DM_MDIO support to tsec. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24phy: make phy_connect_fixed work with a null mdio busVladimir Oltean
It is utterly pointless to require an MDIO bus pointer for a fixed PHY device. The fixed.c implementation does not require it, only phy_device_create. Fix that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P1010RDB: Enable eSPI controller and SPI flash DM driverHou Zhiqiang
Enable the DM_SPI and DM_SPI_FLASH in P1010RDB defconfigs except SECBOOT defconfigs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: P1010RDB: Add eSPI slave DT nodesHou Zhiqiang
Add DT nodes for eSPI slave device SPI flash. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: P1010: Add eSPI controller DT nodeHou Zhiqiang
Add eSPI controller DT node for P1010. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T4240RDB: Enable ESPI driverXiaowei Bao
Enable the DM ESPI driver in T4240RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T4240RDB: Add ESPI slave device nodeXiaowei Bao
Add ESPI slave node for T4240RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T4240: Add ESPI DT nodesXiaowei Bao
Add ESPI controller DT node for T4240. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T2080RDB: Enable ESPI driverXiaowei Bao
Enable the DM ESPI driver in T2080RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T2080RDB: Add ESPI slave device nodeXiaowei Bao
Add ESPI slave node for T2080RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1042D4RDB: Enable ESPI driverXiaowei Bao
Enable the DM ESPI driver in T1042D4RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T1042D4RDB: Add ESPI slave device nodeXiaowei Bao
Add ESPI slave node for T1042D4RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T104x: Add ESPI DT nodesXiaowei Bao
Add ESPI controller DT node for T104x. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: T1024RDB: Enable ESPI driverXiaowei Bao
Enable the DM ESPI driver in T1024RDB defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T1024RDB: Add ESPI slave device nodeXiaowei Bao
Add ESPI slave node for T1024RDB. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: T102x: Add ESPI DT nodesXiaowei Bao
Add ESPI controller DT node for T102x. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: P5040DS: Enable ESPI driverXiaowei Bao
Enable the DM ESPI driver in P5040DS defconfig. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: P5040DS: Add ESPI slave device nodeXiaowei Bao
Add ESPI slave node for P5040DS. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24dts: P5040: Add ESPI DT nodesXiaowei Bao
Add ESPI controller DT node for P5040. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 06:45:35 +0000