aboutsummaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2020-07-18mips: octeon: dts: Add Octeon 3 cn73xx base dtsi fileStefan Roese
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: Initial minimal support for the Marvell Octeon SoCAaron Williams
This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-09i2c: i2c-cortina: added CAxxxx I2C supportArthur Li
Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-07-05Merge tag 'efi-2020-10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi into next Pull request for UEFI sub-system for efi-2020-10-rc1 This series comprises error corrections for the UEFI subsystem: * correct consideration of timestamps for variable authentication * correct collection of data regions for code authentication * correct unit tests to test loading dbx * enable FAT_WRITE as required by the UEFI spec The boot manager uses log functions instead of printf() and debug(). The UEFI intialization state is exported.
2020-07-03test: provide tests for efi_image_region_add()Heinrich Schuchardt
Provide unit tests for efi_image_region_add(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-01clk: Add K210 clock supportSean Anderson
Due to the large number of clocks, I decided to use the CCF. The overall structure is modeled after the imx code. Clocks parameters are stored in several arrays, and are then instantiated at run-time. There are some translation macros (FOOIFY()) which allow for more dense packing. Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Lukasz Majewski <lukma@denx.de>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into nextTom Rini
- Convert fsl_espi to driver model (Chuanhua) - Enable am335x baltos to DM_SPI (Jagan) - Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-18board: amlogic: add board doc files to MAINTAINERSNeil Armstrong
Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-14doc: random number generationHeinrich Schuchardt
Add random number generation APIs to the HTML documentation. Fix style issues. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-11doc: move README.log to HTML documentationHeinrich Schuchardt
Convert README.log to reStructuredText and add it to the generated HTML documentation. Assign doc/develop/logging.rst to the maintainer of LOGGING. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-02cubieboard7: Remove ARCH= references from documentationTom Rini
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry. Cc: Amit Singh Tomar <amittomer25@gmail.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-06-02m68k: Remove ARCH= references from documentationTom Rini
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. While in here, add the doc file to the MAINTAINERS entry for coldfire. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25MAINTAINERS: add dfu.h and dfu.rst to DFUHeinrich Schuchardt
include/dfu.h and doc/api/dfu.rst belong to the device firmware update sub-system. So let's add them to DFU in MAINTAINERS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25MAINTAINERS: add doc/driver-model/ to DRIVER MODELHeinrich Schuchardt
The documentation should rest with the same maintainer as the code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-17MAINTAINERS: Add maintainer for EFI variables via OP-TEEIlias Apalodimas
Add myself as maintainer for the OP-TEE related UEFI variable storage. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15MAINTAINERS: POWERPC MPC8XX: Update email addressChristophe Leroy
Our email addresses have changed from @c-s.fr to @csgroup.eu Update entry in MAINTAINERS Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2020-05-02MAINTAINERS: MediaTek: add USB related filesChunfeng Yun
Add dt-binding files of xhci-mtk and phys, C files of phys. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-30MAINTAINERS: assign test/py/tests/test_efi*/ to EFI PAYLOADHeinrich Schuchardt
Some UEFI related files are not assigned currently. Add them to the EFI PAYLOAD area. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24MAINTAINERS: add entry for cubieboard7 configAmit Singh Tomar
This commit adds entry for cubieboard7 config under Actions Semi OWL family. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-20Merge tag 'ti-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
2020-04-16test: log functions with CONFIG_LOG=nHeinrich Schuchardt
If CONFIG_LOG=n, we still expect output for log_err(), log_warning(), log_notice(), log_info() and in case of DEBUG=1 also for log_debug(). Provide unit tests verifying this. The tests depend on: CONFIG_CONSOLE_RECORD=y CONFIG_LOG=n CONFIG_UT_LOG=y It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to accommodate CONFIG_CONSOLE_RECORD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16log: syslog driverHeinrich Schuchardt
Provide a log driver that broadcasts RFC 3164 messages to syslog servers. rsyslog is one implementation of such a server. The messages are sent to the local broadcast address 255.255.255.255 on port 514. The environment variable log_hostname can be used to provide the HOSTNAME field for the messages. The optional TIMESTAMP field of RFC 3164 is not provided. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-14MAINTAINERS: update entry for ARM TILokesh Vutla
Add all TI specific drivers, include, arch files under ARM TI entry. Driver files are added only if there is no entry for the specific subsystem in MAINTAINERS file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-04-06watchdog: versal: Add support for Xilinx window watchdogAshok Reddy Soma
Add support for Xilinx window watchdog, which can be found on Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-27MAINTAINERS: add myself as maintainer of fs/btrfsMarek Behún
Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-27MAINTAINERS: Add usb.h entry to usbMarek Vasut
Add usb.h file into the USB list. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-03-13MAINTAINERS: update entry for ARM STIPatrice Chotard
Add STi drivers/include files and git tree. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-09mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCsArthur Li
Initial DesignWare based DM support for Cortina Access CAxxxx SoCs. Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-03-02doc: add board documentation for stm32mp1Patrick Delaunay
Change plain test README to rst format and move this file in documentation directory. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-25MAINTAINERS: set maintainer for doc/api/efi.rstHeinrich Schuchardt
doc/api/efi.rst belongs to the UEFI sub-system documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-07MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.Alex Nemirovsky
Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-04doc: android: Convert to Sphinx formatSam Protsenko
Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-23MAINTAINERS: Add entry for rng driversSughosh Ganu
Take up maintainership of random number generator drivers with Heinrich Schuchardt as the reviewer. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-22MAINTAINERS: Add ARM U8500Stephan Gerhold
Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS. Linus Walleij usually reviews all Ux500 related patches, so add him as a reviewer. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-20MAINTAINERS: Update ARM TI entryLokesh Vutla
Take over TI maintainership from Tom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: Add configs for J721e High Security EVMAndrew F. Davis
Add new defconfig files for the J721e High Security EVM. These defconfigs are the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_BOOTCOMMAND uses FIT images for booting Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-16MAINTAINERS: Fix mailSam Protsenko
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change it to his home mail instead. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2019-12-21MAINTAINERS: assign usb.c and and usb_kbd.cHeinrich Schuchardt
Marek is already maintaining USB. Assign files common/usb.c and common/usb_kbd.c to him. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-03MAINTAINERS: Add info for bcm283xMatthias Brugger
The bcm283x has grown in files, which was not reflected in the MAINTAINERS file. Fix this by adding the missing entries. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-21Update MAINTAINERS to include environment filesJoe Hershberger
To be maintained by me (Joe) and reviewed by Wolfgang Denk when available. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-07arm: add initial support for the Phytium Durian Boardliu hao
This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-01MAINTAINERS: add info about ARC HSDK reset driverEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-10-25Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC3 improvements - i.MX7 EHCI bugfix
2019-10-25Merge tag 'u-boot-atmel-2020.01-b' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features and fixes for 2020.01 cycle This feature set includes Eugen's work on a new tiny flexcom driver and eeprom mac retrieval for the sam9x60-ek board.
2019-10-24MAINTAINERS: add MICROCHIP_FLEXCOM to at91Eugen Hristev
Add microchip flexcom driver to at91. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24usb: xhci: move xhci.h to include usbJean-Jacques Hiblot
The xhci.h header file is currently located under drivers/usb/xhci Move it to the include/usb folder to make it available to drivers that are not under drivers/usb/xhci Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-23ufs: Add Initial Support for UFS subsystemFaiz Abbas
Add Support for UFS Host Controller Interface (UFSHCI) for communicating with Universal Flash Storage (UFS) devices. The steps to initialize the host controller interface are the following: - Initiate the Host Controller Initialization process by writing to the Host controller enable register. - Configure the Host Controller base address registers by allocating a host memory space and related data structures. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests Also register this host controller as a SCSI host controller. Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 22:17:39 +0000