aboutsummaryrefslogtreecommitdiff
path: root/README
AgeCommit message (Collapse)Author
2022-06-28Convert CONFIG_USB_EHCI_TXFIFO_THRESH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_EHCI_TXFIFO_THRESH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22cmd: load: add load command for memory mappedRui Miguel Silva
cp.b is used a lot as a way to load binaries to memory and execute them, however we may need to integrate this with the efi subsystem to set it up as a bootdev. So, introduce a loadm command that will be consistent with the other loadX commands and will call the efi API's. ex: loadm $kernel_addr $kernel_addr_r $kernel_size with this a kernel with CONFIG_EFI_STUB enabled will be loaded and then subsequently booted with bootefi command. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_TARGET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_RELOC_TEXT_BASE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_RELOC_STACK CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from ↵Tom Rini
CONFIG_SYS_GBL_DATA_OFFSET In the places where PowerPC references CONFIG_SYS_GBL_DATA_OFFSET it does so as (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET). And it defines CONFIG_SYS_GBL_DATA_OFFSET in the same manner that other architectures define CONFIG_SYS_INIT_SP_OFFSET. Other architectures define CONFIG_SYS_INIT_SP_ADDR as (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) typically. Rename things within PowerPC for consistency with other architectures. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_COMMON_INIT_DDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_COMMON_INIT_DDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usageTom Rini
A number of PowerPC platforms define this, for SPL. To move this to Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use CONFIG_IS_ENABLED() to check for usage. A number of layerscape platforms bring this logic from PowerPC, but only need a small part of it, for the fman driver. Remove their unused portion at least. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_NAND_RAW_ONLY et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_INIT_MINIMAL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-25nds32: Remove the architectureTom Rini
As removal of nds32 has been ack'd for the Linux kernel, remove support here as well. Cc: Rick Chen <rick@andestech.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-04-19Convert CONFIG_SYS_MEM_TOP_HIDE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MEM_TOP_HIDE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08arm: fsl-layerscape: Migrate more DP-DDR options to KconfigTom Rini
Based on current usage, migrate a number of DP-DDR related options to Kconfig. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08Convert CONFIG_CMDLINE_PS_SUPPORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMDLINE_PS_SUPPORT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08Convert CONFIG_BOARD_SIZE_LIMIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_SIZE_LIMIT To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SYS_MONITOR_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_BASE Note that for how this is re-used on some PowePC platforms, we introduce CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the CONFIG_VAL macro to get the correct value at build time, in the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_DEEP_SLEEP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28video: Drop CONFIG_LCD_BMP_RLE8Simon Glass
This is not defined by any board. Even sandbox doesn't actually use it since it has migrated to DM_VIDEO. Drop this option. Remove the dead code also, for completeness, even though the whole lcd.c file will be dropped soon. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2022-03-28video: Drop FSL DIU driverSimon Glass
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop references to CONFIG_VIDEO et alSimon Glass
Drop the Kconfigs which are not used and all references to them. In particular, this drops CONFIG_VIDEO to avoid confusion and allow us to eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO. Also drop the prototype for video_get_info_str() which is no-longer used. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28video: Drop CONFIG_VIDEO_BMP_LOGOSimon Glass
This option is not implemented anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop cfg_consoleSimon Glass
The non-driver model video support was removed two years ago. Drop this driver, which is only used by nokia_rx51. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-25Convert CONFIG_ATMEL_LCD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_GURNARD_SPLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_PHY_RESET_DELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHY_RESET_DELAY Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_TFTP_PORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NFS_TIMEOUT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NFS_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NET_RETRY_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARP_TIMEOUT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARP_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A008044_WORKAROUND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_A008044_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A003399_NOR_WORKAROUND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_A003399_NOR_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18configs: Re-run migrationsTom Rini
As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03net: Remove CONFIG_BOOTP_DHCP_REQUEST_DELAYTom Rini
This option is not in use anywhere and the documentation implies it's for some very old and unlikely to be seen currently issues. Rather than update the code so the CONFIG symbol could be easily in Kconfig, remove the code. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_POSTCLK_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_POSTCLK_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICESimon Glass
This is defined based on two other CONFIGs for all boards except sandbox and durian. For sandbox the value does not matter. For durian the value seems excessive. Drop the option completely, to simplify configuration and reduce the number of things we need to convert to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09Convert CONFIG_SYS_IDE_MAXBUS et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET CONFIG_ATAPI CONFIG_IDE_RESET Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 11:32:49 +0000