aboutsummaryrefslogtreecommitdiff
path: root/arch/arc
AgeCommit message (Collapse)Author
2020-05-13ARC: HSDK: add reset for EHCIEugeniy Paltsev
Add reset phandle to EHCI device tree node to make on-chip reset controller usable with EHCI. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13ARC: DTS: cleanup USB node namesEugeniy Paltsev
Remove redundant '0x' from node names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: AXS10x: cleanup kconfigEugeniy Paltsev
As we've dropped NAND support for AXS101 and AXS103 see commit 4f5e552d95bb ("ARC: AXS10x: drop NAND support") we don't need bounce buffer anymore. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK-4xD: add CSM configuration supportEugeniy Paltsev
Add support for CSM enable/disable and CSM relocation via hsdk_init command. We allow to relocate CSM to the beginning of any aperture even if HW support finer granularity. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK-4xD: print timer clock valueEugeniy Paltsev
Print timer clock value in hsdk_clock print_all command. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK: split HSDK and HSDK-4xD DTSEugeniy Paltsev
Split HSDK and HSDK-4xD device tree files so they can have different model names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK-4xD: add initial board supportEugeniy Paltsev
Add initial HSDK-4xD board support. The ARC HS4x/HS4xD Development Kit includes a multicore ARC HS4xD-based chip that integrates a wide range of interfaces including Ethernet, HDMI, WiFi, Bluetooth, USB, SDIO, I2C, SPI, UART, I2S, ADC, PWM and GPIO, as well as a Think Silicon GPU. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: ARCv2: handle DSP presence in HWEugeniy Paltsev
In case of DSP extension presence in HW some instructions (related to integer multiply, multiply-accumulate, and divide operation) executes on this DSP execution unit. So their execution will depend on dsp configuration register (DSP_CTRL) As we want these instructions to execute the same way regardless of DSP presence we need to set DSP_CTRL properly. NOTE: we do the same adjustments in Linux kernel, see in kernel tree: commit 4827d0cf744e ("ARC: handle DSP presence in HW") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: HSDK: Enable on-chip reset controllerEugeniy Paltsev
As the driver of on-chip reset controller became available we are ready to enable it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: mark IOC helper functions as inlined_cachefuncEugeniy Paltsev
Force inlining of IOC related functions used in other cache functions. This is preventive change. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: add support for SL$ disableEugeniy Paltsev
Since version 3.0 ARC HS supports SL$ (L2 system level cache) disable. So add support for SL$ disable/enable to code. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-10kconfig / kbuild: Re-sync with Linux 4.19Tom Rini
Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact on files outside of this scope. Our previous Kconfig sync was done by commit 5972ff077e0f ("kconfig / kbuild: re-sync with Linux 4.18"). In this particular re-sync in order to keep clang support working a number of related changes needed to be pulled in that had been missed previously. Not all of these changes we easily traceable and so have been omitted from the list below. The imported Linux commits are: [From prior to v4.18] 9f3f1fd29976 kbuild: Add __cc-option macro d7f14c66c273 kbuild: Enable Large File Support for hostprogs 6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*' 24403874316a Shared library support 86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang 0294e6f4a000 kbuild: simplify ld-option implementation [From v4.18 to v4.19] 96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS 10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS 8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line 4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config 693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags) 2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F) c931d34ea085 arm64: build with baremetal linker target instead of Linux when available 5accd7f3360e kconfig: handle format string before calling conf_message_callback() a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c 0608182ad542 kconfig: split out useful helpers in confdata.c adc18acf42a1 kconfig: remove unneeded directory generation from local*config 79123b1389cc kconfig: create directories needed for syncconfig by itself 16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count d6c6ab93e17f kbuild: remove deprecated host-progs variable 56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol c151272d1687 kconfig: remove unused sym_get_env_prop() function 1880861226c1 kconfig: remove P_ENV property type e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile 4bf6a9af0e91 kconfig: add build-only configurator targets f1575595d156 kconfig: error out when seeing recursive dependency 5e8c5299d315 kconfig: report recursive dependency involving 'imply' f498926c47aa kconfig: improve the recursive dependency report 98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build 9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig 87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS 217c3e019675 disable stringop truncation warnings for now bc8d2e20a3eb kconfig: remove a spurious self-assignment fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config 5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments Note that this adds new cleanup work to do in that we should adapt the shared library support we have to what is now upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-31ARC: IO: add MB for __raw_* memory accessorsEugeniy Paltsev
We add memory barriers for __raw_readX / __raw_writeX accessors same way as it is done for readX and writeX accessors as lots of U-boot driver uses __raw_readX / __raw_writeX instead of proper accessor with barrier. It will save us from lot's of debugging in the future and it is OK as U-Boot is not that performance oriented as real run-time software like OS or user bare-metal app so we may afford being not super fast as we only being executed once. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-03-31ARC: IO: add compiler barriers to IO accessorsEugeniy Paltsev
We must use compiler barriers in C-version read/write IO accessors before and after operation (read or write) so it won't be reordered by compiler. Fixes commit 07906b3dad15 ("ARC: Switch to generic accessors") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-03-31ARC: IO: add volatile to accessorsEugeniy Paltsev
We must use 'volatile' in C-version read/write IO accessors implementation to avoid merging several reads (writes) into one read (write), or optimizing them out by compiler. Fixes commit 07906b3dad15 ("ARC: Switch to generic accessors") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-20dma-mapping: add <asm/dma-mapping.h> for all architecturesMasahiro Yamada
To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-12ARC: Switch to generic accessorsAlexey Brodkin
First of all U-Boot is not that performance oriented as real run-time software like OS or user bare-metal app so we may afford being not super fast as we only being executed once. That in return allows us to be more universal and support wider variety of devices. And looking forward that will significantly reduce maintenance and simplify support of newer architectures. And while at it we add quad-word accessors like readq(), writeq() etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: rework setting of ARC CPU specific compiler optionsEugeniy Paltsev
It's a very rare if at all existing occasion when ARC CPU template is used as is w/o any changes - in the end it's a beauty and competitive advantage of ARC cores to be tailored for a particular use-case - and so it doesn't make a lot of sense to offer template-based "-mcpu" selection. Given for each and every platform we end-up adding quite a few more flags it's logical to move "-mcpu" selection to platform's definition as well which we exactly do here. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: nsim_hs38: Add support of Virtio NET & BLKAlexey Brodkin
Given now nsim_hs38 configuration is usable on QEMU and in QEMU we have Virtio working perfectly fine the next logical step is to add support of supported & known to work net & bkl to this config. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: nSIM: switch from ARC UART to DW UARTAlexey Brodkin
Since v2019.06 DesingWare nSIM supports DesignWare UART simulation and so we may switch from pretty unusual ARC UART to much more standard DesignWare UART (which in case of U-Boot is just an ordinary 16650 UART). This among other things makes built dinaries compatible with our other platforms to name a few: FPGA-based HAPS boards, QEMU and even ZeBU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-01arc: emsdp/iotdk: Switch to DM_MMCAlexey Brodkin
Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion to DM MMC. So doing it now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-10-07NET: DW: fix regression for ARC boardsEugeniy Paltsev
The commit 642b80d256e ("net: designware: drop compatible altr, socfpga-stmmac") breaks designware ethernet for all ARC boards. It removes "altr, socfpga-stmmac" compatible from "drivers/net/designware.c" without changing compatible in the boards which use it. Fix that by adding "snps,arc-dwmac-3.70a" compatible string to "drivers/net/designware.c" and using it in ARC boards device tree. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2019-09-03arc: libgcc: Import __udivdi3 & __udivmoddi4 to allow 64-bit divisionAlexey Brodkin
As reported by Kever here [1] we were unable to compile 64-bit division code due to missing definition of __udivdi3(). Import its implementation and __udivmoddi4() as its direct dependency from today's libgcc [2]. [1] https://patchwork.ozlabs.org/patch/1146845/ [2] https://github.com/gcc-mirror/gcc/commit/5d8723600bc0eed41226b5a6785bc02a053b45d5 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18CONFIG_SYS_[DI]CACHE_OFF: convert to KconfigTrevor Woerner
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig parameters; only for the ARC architecture. This patch turns these two parameters into Kconfig items everywhere else they are found. All of the include/configs/* and defconfig changes in this patch are for arm machines only. The Kconfig changes for arc, nds32, riscv, and xtensa have been included since these symbols are found in code under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined include/configs/* or defconfigs for these architectures exist which include these symbols. These results have been confirmed with tools/moveconfig.py. Acked-by: Alexey Brodkin <abrodkin@snopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Re-migrate for a few more boards] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-18ARC: [plat-axs10x]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18ARC: [plat-hsdk]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-12dts: switch spi-flash to jedec, spi-nor compatibleNeil Armstrong
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot dts files. This compatible has been added in sf_probe, let use it. This patch switches to jedec,spi-nor when spi-flash is used in the DTS and DTSI files, and removed spi-flash when jedec,spi-nor is already present. The x86 dts are switched in a separate commit since it depends on a change in fdtdec. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-25ARC: cache: define CONFIG_SYS_CACHELINE_SIZE as ARCH_DMA_MINALIGNAlexey Brodkin
Even though we don't use CONFIG_SYS_CACHELINE_SIZE in ARC-specific code it is used a lot in different drivers for alignment purposes. So we define it and make much more drivers at least compilable for ARC. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-01-25ARC: Fix iteration in arc_xx_version()Alexey Brodkin
"i" gets incremented before we're entering loop body and effectively we iterate from 1 to 8 instead of 0 to 7. This way we: a) Skip the first line of struct hs_versions b) Go over it and access memory beyond the structure Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2018-12-03ARC: Improve identification of ARC coresAlexey Brodkin
1. Try to guess a ARC core template that was used i.e. not just name a core family but something more menaingful like "ARC HS38", "ARC EM11D" etc. We do it checking availability of the key differentiation features like: - Caches (we actually only check for L1 I$ fpr simplicity) - XY-memory - DSP extensions etc. 2. Identify ARC subsystems 3. Print core clock frequency Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-11-01emdk->emsdp: Rename boardAlexey Brodkin
Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-15ARC: Don't use COMMON section for global not-initialized variablesAlexey Brodkin
By default GCC puts global non-initialized variables in COMMON section. And we used to ignore existence of COMMON section in our linker scripts though smart LD silently appended it right after .bss. And the problem here is variables from COMMON section even though require zeroing in run-time were not zeroed as they were placed right after __bss_end symbol. It was a pure luck we never faced serious problem due to this, but now it is fixed. Now as for some other architectures we'll just force GCC to put those global variables in normal .bss section. This solution is much nicer than adding COMMON section to each and every linker script. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12ARC: make generic print_cpuinfo() weakAlexey Brodkin
This allows board to override print_cpuinfo() because they might know better which ARChitect template was used. This way we may not only derive base architecture type and version but more meaningful things like "ARC EM7D" instead of simple "ARC EM", "ARC HS36" instead of "ARC HS". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05arc: Add support for IoT development kitAlexey Brodkin
The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Implement print_cpuinfo()Alexey Brodkin
Once we enable DISPLAY_CPUINFO for ARC we'll see ARC core family and version printed on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Add model property to boards .dtsAlexey Brodkin
1. This way we sync with Linux kernel where we have model set for all ARC boards for quite some time, see [1] 2. Once we enable DISPLAY_BOARDINFO for ARC this info will be printed on boot givin some extra data-point about the board [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=618a9cd06dd471ac232f5b27325b24d26eba5571 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Don't pre-define CROSS_COMPILEAlexey Brodkin
Even though arc-linux- prefix is used in ARC prebuilt tools and in Buildroot there're other options like Linux distro cross-tools etc where prefix is different so let's not rely on this default. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-09-10arch: types.h: factor out fixed width typedefs to int-ll64.hMasahiro Yamada
All architectures have the same definition for s8/16/32/64 and u8/16/32/64. Factor out the duplicated code into <asm-generic/int-ll64.h>. BTW, Linux unified the kernel space definition into int-ll64.h a few years ago as you see in Linux commit 0c79a8e29b5f ("asm/types.h: Remove include/asm-generic/int-l64.h"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-05ARC: HSDK: Fix timer frequency valueEugeniy Paltsev
CPU (and hence cpu timers) on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk.dts Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2018-07-31ARC: Enable unaligned access in hardware if compiler uses itAlexey Brodkin
Even if ARC core might handle unaligned access to data this hardware feature by default is disabled. But GCC starting from 8.1.0 unconditionally uses it for ARC HS cores. Which leads to quite strange and fatal run-time failures like the one below if HW is not configured properly: | hsdk# sf probe | Misaligned data access exception @ 0xbff794d4 | ECR: 0x000d0000 | RET: 0xbff794d4 | BLINK: 0xbff79644 | STAT32: 0x00000800 | GP: 0x1003e000 r25: 0xbfd58f08 | BTA: 0xbff794a4 SP: 0xbfd58cd4 FP: 0xbfd58ef0 | LPS: 0xbff90240 LPE: 0xbff90244 LPC: 0x00000000 | r00: 0x00000000 r01: 0x00000003 r02: 0x000026bf | r03: 0x00000000 r04: 0x00000100 r05: 0x00000000 | r06: 0x00000001 r07: 0x00000000 r08: 0x1dcd6500 | r09: 0x00000000 r10: 0x00200000 r11: 0x00000000 | r12: 0x1b3d4440 r13: 0xbff9eca4 r14: 0xbfd59d68 | r15: 0xbfd60cd0 r16: 0x00000000 r17: 0x00000000 | r18: 0xbff9ed14 r19: 0xbfd59c78 r20: 0xbfd58d40 | r21: 0xbfd58d44 r22: 0x00000000 r23: 0x00000000 | r24: 0xbfd59ba8 | Resetting CPU ... Now we're checking for __ARC_UNALIGNED__ define emitted by the compiler if it's going to use unaligned access and then we force-enable it in hardware too. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31AXS10x: add spi flash supportEugeniy Paltsev
AXS10x boards have n25q512 spi flash IC, so add corresponding nodes to device tree and enaple corresponding options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31GPIO: CREG: improve flexibility of hsdk-creg-gpio driverEugeniy Paltsev
CREG GPIO is a driver for weird soc-specific output ports, which are controlled by some fields in memory mapped register. Example: 31 9 7 5 0 < bit number | | | | | [ not used | gpio-1 | gpio-0 | <-shift-> ] < 32 bit register ^ ^ | | write 0x2 == set output to "1" (activate) write 0x3 == set output to "0" (deactivate) As of tooday we only support fixed (hardcoded) bit per gpio line, activate / deactivatei and shift values. Fix that by read them from device tree to be able to use this driver for other boards. Remove "hsdk" prefix from compatible string as this driver can be used with different boards like HSDK, AXS101, AXS103, etc. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-30Kconfig: Sort bool, default, select and imply optionsMichal Simek
Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 07:53:04 +0000