aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2022-07-25apalis_imx6: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux-next 20220706. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Apalis Evaluation (carrier) board (e.g. imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25imx6dl/imx6qdl: synchronise device trees with linuxMarcel Ziswiler
Synchronise device trees with linux-next next-20220708. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25tbs2910: prepare to synchronise device trees with linuxMarcel Ziswiler
As a preparatory step make sure to refer to absolute node paths where labels were removed in Linux upstream. This avoids the following error once synchronised: +Error: arch/arm/dts/imx6q-tbs2910-u-boot.dtsi:3.1-7 Label or path aips1 not found +Error: arch/arm/dts/imx6q-tbs2910-u-boot.dtsi:11.1-5 Label or path soc not found Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25imx6: aristainetos: fix pwms property warningsMarcel Ziswiler
Fix the following build-time pwms property warnings: w+arch/arm/dts/imx6dl-aristainetos2c_7.dtb: Warning (pwms_property): /backlight:pwms: property size (12) too small for cell size 3 w+arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dtb: Warning (pwms_property): /backlight:pwms: property size (12) too small for cell size 3 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-07-25board/BuR/brppt2: fix pwms property warningMarcel Ziswiler
Fix the following build-time pwms property warning: w+arch/arm/dts/imx6dl-brppt2.dtb: Warning (pwms_property): /backlight:pwms: property size (12) too small for cell size 3 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25imx8mm: Sync device tree with linux-next 20220711Fabio Estevam
Sync imx8mm.dtsi device tree with linux-next 20220711. The main motivation for doing this sync is the sha256 regression reported by Andrey Zhizhikin [1]. The linux-next kernel has the following commit, which disables the job ring 0 and fixes the problem: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20220715&id=dc9c1ceb555ff661e6fc1081434600771f29657c [1] https://lore.kernel.org/u-boot/AM6PR06MB46912207D9460CD9924F35DAA68B9@AM6PR06MB4691.eurprd06.prod.outlook.com/T/#t Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-07-25dts: imx8mm-uboot: Add support to pack FlexSPI Header using binmanMamta Shukla
Add definition for FSPI configuration block and subsequently new offsets for u-boot-spl and u-boot-itb for CONFIG_FSPI_HEADER option. Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-25arm: dts: imx8mm-venice-gw700x: add support for GPY111 phyTim Harvey
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due to part availability. Add support for it: - increase post-reset time to 300ms per datasheet - leave tx-delay/rx-delay undefined in dt defaulting to 2.0ns Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-07-21arm: mvebu: turris_omnia: Set ETHPRIME to DT aliasPali Rohár
CONFIG_ETHPRIME can be set to DT node name or alias which refers to DT node. Define ethernet aliases and set ETHPRIME to eth2 which refers to WAN ethernet port. This removes hardcoded DT node name from U-Boot configuration file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21treewide: Fix Marek's name and change my e-mail addressMarek Behún
Fix diacritics in some instances of my name and change my e-mail address to kabel@kernel.org. Add corresponding .mailmap entries. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21arm: mvebu: add support for Methode eDPURobert Marko
Methode eDPU is an Armada 3720 power board based on the Methode uDPU. They feature the same CPU, RAM, and storage as well as the form factor. However, eDPU only has one SFP slot plus a copper G.hn port which does not work under U-boot. In order to reduce duplication, split the uDPU DTS into a common one. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21arm: mvebu: dts: sync DTSRobert Marko
Update the uDPU DTS to the version that is pending upstream [1][2][3][4]. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/ [2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/ [3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/ [4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/ Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-13Merge tag 'u-boot-stm32-20220712' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Alignment with Linux kernel device tree v5.19 for stm32mp15 and stm32mp13 - Add OP-TEE nodes for stm32mp13x, alligned with upstreamed OP-TEE - Introduce of_to_plat ops in stm32_sdmmc2 driver - Activate more features in stm32mp13 defconfig and support of STM32MP13x Rev.Y - Drop fastboot and stm32prog trigger gpios on STM32MP15x DHCOM board
2022-07-12arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOMJohann Neuhauser
PA13 and PA14 are used for USB power control and can't be used to enforce fastboot or stm32prog mode by pressing a button. Defining CONFIG_FASTBOOT/CONFIG_CMD_STM32PROG without this patch applied results in fastboot/stm32prog always starting, because PA13/PA14 are always low during boot. So drop the wrong trigger gpios definitions. Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-07-12ARM: dts: stm32mp13: activate led on STM32MP13F-DKPatrick Delaunay
Activate the led managed in stm32mp1 board for U-Boot indication in STM32MP13F-DK device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12ARM: dts: stm32mp13: alignment with v5.19Patrick Delaunay
Device tree alignment with Linux kernel v5.19-rc1 with: - ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk - ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk - ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131 - ARM: dts: stm32: enable RTC support on stm32mp135f-dk - ARM: dts: stm32: add RTC node on stm32mp131 - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)Patrick Delaunay
Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12ARM: dts: stm32mp15: alignment with v5.19Patrick Delaunay
Device tree alignment with Linux kernel v5.19-rc1 - ARM: dts: stm32: Add alternate pinmux for ethernet0 pins - ARM: dts: stm32: Add alternate pinmux for mco2 pins - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) - ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group - dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 - dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 - dt-bindings: clock: stm32mp15: rename CK_SCMI define - dt-bindings: reset: stm32mp15: rename RST_SCMI define - dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 - dt-bindings: clk: cleanup comments - ARM: dts: align SPI NOR node name with dtschema - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 - ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 + patch from stm32-dt-for-v5.19-fixes-2 - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 - ARM: dts: stm32: fix pwr regulators references to use scmi - ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 - ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board - ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI - ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12ARM: dts: stm32mp13: add SCMI nodesPatrick Delaunay
Add the node for SCMI firmware with the associated reserved memory nodes Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12ARM: dts: stm32mp13: add OP-TEE nodesPatrick Delaunay
Add the node for OP-TEE firmware with the associated reserved memory nodes Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-11Merge branch 'next'Tom Rini
2022-07-07thunerx_88xx: Clean up config slightly.Tom Rini
We don't use CONFIG_SYS_64BIT anywhere and can use CONFIG_TARGET_THUNDERX_88XX to build the device trees. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06ARM: dts: ast2500: Update SDHCI nodesJoel Stanley
Match the description used by the Linux kernel, except use scu instead of syscon as the phandle. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06ARM: dts: ast2600: Update SDHCI nodesJoel Stanley
Match the description used by the Linux kernel, except use scu instead of syscon as the phandle. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06ARM: dts: ast2600-evb: Add I2C devicesJoel Stanley
The EVB has an EEPROM and ADT8490 temp sensor/fan controller on bus 7, and a LM75 temp sensor on bus 8. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06ARM: dts: ast2500-evb: Add I2C devicesJoel Stanley
The EVB has an EEPROM on bus 3 and a LM75 temp sensor on bus 7. Enable those busses we can test the I2C driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06ARM: dts: ast2600-evb: Remove redundant pinctrlJoel Stanley
Now that these are in the dtsi we don't need them in the EVB device tree. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06ARM: dts: ast2600: Disable I2C nodes by defaultJoel Stanley
Allow boards to enable the buses they use. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06ARM: dts: ast2600: Add I2C reset propertiesJoel Stanley
The same as the upstream Linux device tree, each i2c bus has a property specifying the reset line. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06ARM: dts: ast2600: Add I2C pinctrlEddie James
Set the pinctrl groups for each I2C bus. These are essential to I2C operating correctly. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06arm: dts: k3-am625-*: Mark memory with u-boot,dm-splGeorgi Vlaev
Mark the memory node with u-boot,dm-spl so we can use it from early SPL on both R5 and A53. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-01Merge commit 'ef5ba2cef4a08b68caaa9215fcac142d3025bbf7' of ↵Tom Rini
https://github.com/tienfong/uboot_mainline
2022-07-01arm: dts: Add Chameleonv3 devicetreesPaweł Anikiel
Add devicetrees for Google Chameleon V3 board Signed-off-by: Paweł Anikiel <pan@semihalf.com> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-01arm: dts: Add Chameleonv3 handoff headersPaweł Anikiel
Add handoff headers for the Google Chameleonv3 variants: 480-2 and 270-3. Both files were generated using qts-filter-a10.sh. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-01arm: dts: Add Mercury+ AA1 devicetreesPaweł Anikiel
Devicetree headers for Mercury+ AA1 module Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-29rockchip: pinebook-pro: sync PBP dtb to 5.18Peter Robinson
Sync the pinebook pro to upstream 5.18, in particular this brings brings in a fix so the DP is disabled so Linux will actually boot. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-29arm: dts: rockchip: rk3288: move dma-controller nodesJohan Jonker
In order to better compare the Linux rk3288.dtsi version with the u-boot version move the dma-controller nodes to the DT root. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-29arm: dts: rockchip: rk3288: sort mipi hdmi lvds and dp nodesJohan Jonker
In order to better compare the Linux rk3288.dtsi version with the u-boot version sort the mipi,hdmi,lvds and dp nodes. Changed: Rename mipi_dsi label. Rename dp nodename. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-29arm: dts: rockchip: rk3288: bulk convert gpios to their constant counterpartsJohan Jonker
Bulk convert rk3288 DT gpios to their constant counterparts. Partial Linux sync for the rk3288.dtsi file. ARM: dts: rockchip: bulk convert gpios to their constant counterparts https://lore.kernel.org/all/20190402121852.14442-1-heiko@sntech.de/ sed -i -f script.sed rk3288.dtsi ================================ /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-29arm: dts: rockchip: remove usb-phy fallback string for rk3188Johan Jonker
With the conversion of rockchip-usb-phy.yaml a long time used fallback string for rk3066a/rk3188 was added. The linux driver doesn't do much with the GRF phy address range, however the u-boot driver rockchip_usb2_phy.c does. The bits in GRF_UOC0_CON2 for rk3066a/rk3188 and rk3288 for example don't match. Remove the usb-phy fallback string for rk3188 to prevent possible strange side effects. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-06-28arm: samsung: Migrate a number of symbols to KconfigTom Rini
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28kontron-sl-mx8mm: Add CAAM supportFabio Estevam
Add CAAM support, which is required when enabling HAB secure boot. Select CONFIG_SPL_DRIVERS_MISC so that CONFIG_IMX_HAB could build successfully, if selected. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-06-28ARM: dts: at91: sam9x60ek: fix eeprom compatibleEugen Hristev
The memory on this board is microchip 24aa025e48 which is compatible with at24c02 with a page size of 16. Fix the compatible accordingly. Reported-by: Sergiu Moga <sergiu.moga@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-28ARM: dts: at91: replace microchip, 24aa02e48 with atmel, at24c02Eugen Hristev
microchip,24aa025e48 does not exist in the bindings of this driver. It can be replaced with atmel,at24c02 which is a standard compatible and the memory is compatible with this one, depending on the page size. microchip 24aa02e48 has a page size of 8, while 24aa025e48 has a page size of 16 bytes. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-28ARM: dts: at91: sama7g5/sama7g5ek: sync with kernel at91 5.19Eugen Hristev
Sync with at91 maintainer tree for-5.19 branch. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-06-28ARM: dts: sam9x60: fix compatible for qspi child nodeSergiu Moga
Change the compatible of the qspi child node to `jedec,spi-nor` so that it can be properly found when probing the bus. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-06-27Merge tag 'xilinx-for-v2022.10' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location
2022-06-26ARM: dts: sun4i: Sync from Linux v5.18-rc1Samuel Holland
Copy the devicetree source for the A10 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. The previous version of this change was only partially applied. Fixes: 4746694cba74 ("ARM: dts: sun4i: Sync from Linux v5.18-rc1") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-06-24ARM: zynq: Fix size-cells for pl353 driverAmit Kumar Mahapatra
"size-cells" of the nand controller node should be 0 as the "reg" property of the nand device node contains the chip select number and not address information. The patch fixes the below compilation warning arch/arm/dts/zynq-zc770-xm011.dtb: Warning (reg_format): /axi/memory-controller@e000e000/nand-controller@0,0/nand@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/6e90665a2dad7fe8ade10b8f57101f8144963791.1655288559.git.michal.simek@amd.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 07:15:06 +0000