aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-06-01armv7: Add ST-Ericsson u8500 archJohn Rigby
Based on ST-Ericsson internal git repo. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Albert Aribaud <albert.aribaud@free.fr>
2011-05-26S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)Minkyu Kang
The source of pwm clock is fixed at evt1. And some registers for pwm clock are removed. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: add set_mmc_clk for external clock controlJaehoon Chung
This patch added set_mmc_clk for external clock control. c210 didn't support host clock control. So We need external_clock_control function for c210. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5PC2XX: Support the cpu revisionMinkyu Kang
S5PC210 SoC have two cpu revisions, and have some difference. So, support the cpu revision for each revision. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5P:SROM config code moved to s5p-common directoryChander Kashyap
SROM config code is made common for S5P series of boards. smdkc100.c now refers to s5p-common/sromc.c for SROM related subroutines. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: GPIO Macro Values Corrected.Chander Kashyap
S5PC2XX: Macro values for Pull Up and Driver Strength were wrong. S5PC1XX: Macro values for Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-23MX31: drop warnings due to missing prototype for mxc_watchdog_reset()Stefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-05-23MX31: Make get_reset_cause() static and drop unreachable codeStefano Babic
get_reset_cause() should not be exported. Drop code in the function after return statement that can generate warnings due to unreachable code. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX53: Handle silicon revision 2.1 caseFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-19Minor coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-18at91: fixed at91sam9263 system fileDaniel Gorsulowski
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2011-05-18remove __attribute__ ((packed)) in at91 headersJens Scharsig
* remove __attribute__ ((packed)) to prevent byte access to soc registers in some gcc version Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2011-05-18at91rm9200: fix lowlevel_init() SMRDATA sizeJens Scharsig
* use start/end label for initialization tables instead of fix values Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-05-18AT91: fix timer.c - remove reset_timer()Reinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: remove LEGACY from at91_rstc.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: change includes from asm/arch/io.h to asm/io.hReinhard Meyer
and remove the now unused asm/arch-at91/io.h Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup at91sam9260_matrix.h to struct SoC accessReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related at91 system/driver filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: fix related arch-at91 header filesReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: cleanup hardware.h, remove memory-map.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9g45.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9263.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9261.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18AT91: rework at91sam9260.hReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-11Kirkwood: allow to override CONFIG_SYS_TCLKSimon Guinot
This patch allow to override CONFIG_SYS_TCLK from board configuration files. This is needed for the Network Space v2 which use a non standard core clock frequency (166MHz instead of 200MHz for a 6281 SoC). As a possible enhancement for 6281 and 6282 devices, TCLK could be dynamically detected by checking the Sample at Reset register bit 21. Additionally this patch fix a typo. Signed-off-by: Simon Guinot <sguinot@lacie.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2011-05-11MX31: change return value of get_cpu_revStefano Babic
Drop warnings in get_cpu_rev and changes the return value (a u32 instead of char * is returned) of the function to be coherent with other processors. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Detlev Zundel <dzu@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-11MX31: removed warning due to missing prototypeStefano Babic
Drop warning caused by missing prototype for mxc_hw_watchdog_reset(). Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-30Handle most LDSCRIPT setting centrallyScott Wood
Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-27Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2011-04-27Don't grab memory for LCD if FB address is definedMinkyu Kang
If FB address is defined specific address then don't grab memory for LCD Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com>
2011-04-27ftsmc020: move ftsmc020 static mem controller to driver/mtdMacpaul Lin
Move the header file and definitions of ftsmc020 static memory control unit from a320 SoC folder to "drivers/mtd" folder. This change will let other SoC which also use ftsmc020 could share the same header file. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-27ftsdmc020: move ftsdmc020.h to include/faradayMacpaul Lin
Move the header file "ftsdmc020.h" (SDRAM Controller) to "include/faraday" folder. This change will let other SoC which also use ftsdmc020 could share the same header file. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-27ARMV7: OMAP3: Cleanup extern variables in mem.cLuca Ceresoli
Removed boot_flash_* extern variables. boot_flash_type was totally unused. The other ones were actually constants, so they have been replaced with #defines in the board config files. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-27arm: Tegra2: GPIO: Add basic GPIO definitionsTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-04-27arm: Tegra2: Add missing PLLX initTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-04-27ARM: fix stack pointer adjustment in board_init_f()Eric Cooper
Since addr_sp is a byte address, it should be adjusted by 12 here. Signed-off-by: Eric Cooper <ecc@cmu.edu> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Wolfgang Denk <wd@denx.de>
2011-04-27arm: Tegra2: add support for A9 CPU initTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-04-27ARMV7: OMAP3: Add GPMC_CONFIGx register value definitionsLuca Ceresoli
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-27ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XXLuca Ceresoli
CONFIG_OMAP34XX must be checked for existence, not value. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-27omap3_beagle: enable EHCI and USB storage.Alexander Holler
The reset sequence/configuration for ehci is highly board specific, so this will be done in the source for the board, instead of introducing several CONFIG_* which would be needed to make those few lines in beagle.c usable across different OMAP boards. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-27OMAP3: Add support for DPLL5 (usbhost)Alexander Holler
Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-04-27Replace obsolete e-mail addressAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-04-27a320evb: fix include path of timer fttmr010Macpaul Lin
Fix include path of timer fttmr010 in a320evb. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-27fttmr010: move fttmr010 header to include/faradayMacpaul Lin
Move the header file and definitions of fttmr010 power control unit from a320 SoC folder to "include/faraday" folder. This change will let other SoC which also use fttmr010 could share the same header file. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-27Orion5x: Correct DRAM bank detectionRogan Dawes
2011-04-27I2C: add i2c support for Armada100 platformLei Wen
Add i2c support to aspenite board with Armada100 soc. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-04-27I2C: add i2c support for Pantheon platformLei Wen
Add i2c support to dkb board with pantheon soc. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-04-27mv_i2c: use structure to replace the direclty defineLei Wen
Add i2c_clk_enable in the cpu specific code, since previous platform it, while new platform don't need. In the pantheon and armada100 platform, this function is defined as NULL one. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-04-27pxa: move i2c driver to the common placeLei Wen
For better sharing with other platform other than pxa's, it is more convenient to put the driver to the common place. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-04-27arm: a320: use new ftpmu010 APIPo-Yu Chuang
ftpmu010 related code has been moved to drivers/power/. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 16:56:49 +0000