aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze/cpu
AgeCommit message (Collapse)Author
2019-05-05spl: fix linker size check off-by-one errorsSimon Goldschmidt
This fixes SPL linker script size checks for 3 lds files where the size checks were implemented as "x < YYY_MAX_SIZE". Fix the size checks to be "x <= YYY_MAX_SIZE" instead. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-07-19microblaze: Convert generic platform to DM gpioMichal Simek
Converting GPIO to DM requires to do changes in reset subsystem that's why support for Microblaze soft reset via sysreset and GPIO sysreset support was added. These two patches enables enabling GPIO DM. Microblaze soft reset is bind at last reset method. GPIO reset is handled via sysreset with adding this fragment to DT. gpio-restart { compatible = "gpio-restart"; gpios = <&reset_gpio 0 0 0>; /* 3rd cell ACTIVE_HIGH = 0, ACTIVE_LOW = 1 */ }; hard-reset-gpio property is not documented and also handled. Conversion is required. Unfortunately do_reset is required for SPL that's why use only soft microblaze reset for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19microblaze: Do not call timer init that earlyMichal Simek
Timer needs to be converted to DM but as of now it can't be called so early because intc controller is not ready. Call it later in board_r.c. Before this patch timer_init is called twice which is wrong. The patch is blocking initialization before relocation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-27microblaze: spl: configure SYS_MALLOC_F_LEN independently for SPL and full ↵Andy Yan
U-Boot Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixed up commit-message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-05-08spl: make image arg or fdt blob address reconfigurableVikas Manocha
At present fdt blob or argument address being passed to kernel is fixed at compile time using macro CONFIG_SYS_SPL_ARGS_ADDR. FDT blob from different media like nand, nor flash are copied to the address pointed by the macro. The problem is, it makes args/fdt blob compulsory to copy which is not required in cases like for NOR Flash. This patch removes this limitation. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-02-10microblaze: Fix endif macro commandMichal Simek
Use correct name in endif comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-10-06spl: Add a parameter to jump_to_image_linux()Simon Glass
Instead of using the global spl_image variable, pass the required struct in as an argument. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-04microblaze: Remove !OF_CONTROL code for timer and interruptMichal Simek
OF_CONTROL is enabled by default that's why this is dead code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04microblaze: Read information about timer/interrupts from DTMichal Simek
Read information about timer and interrupts from DT. This is the first small step to move timer and intc to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27microblaze: Remove empty file - cpu.cMichal Simek
No need to have empty unused file in architecture code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27microblaze: Wire-up debug_uart in asmMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13Fix board init code to respect the C runtime environmentAlbert ARIBAUD
board_init_f_mem() alters the C runtime environment's stack it is actually already using. This is not a valid behaviour within a C runtime environment. Split board_init_f_mem into C functions which do not alter their own stack and always behave properly with respect to their C runtime environment. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-24microblaze: Add a TODO to call board_init_f_mem()Simon Glass
This C function should be used to do the early memory layout and init. This is beyond my powers, so just add a TODO for the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-03-24remove unnecessary version.h includesRob Herring
Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-02-09microblaze: spl: Add LISTS to linker scriptMichal Simek
This is required for driver model. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: spl: Do not call mem_malloc_init and use early allocMichal Simek
This patch has some parts connected together: - Use _gd in bss section which is automatically cleared Location at SPL_MALLOC_END wasn't cleared at all - Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC (mem_malloc_init is not called at all) - Simplify malloc and stack init. At the end of SPL addr is malloc area and below is stack Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Add support for CONFIG_SYS_MALLOC_F_LENMichal Simek
Create space for dm_init where calloc is called and malloc_base has to be initialized. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATAMichal Simek
Because it is not compatible with DM where malloc_base has to be available early and init has to be done in ASM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Speedup code copyMichal Simek
Remove one instruction in the loop which speedup code copying. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Move architecture to use generic board initMichal Simek
Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Fix gd_t address which is placed at the end of BRAMMichal Simek
Setup gd from ASM to be availalbe for board_init_r. Setting it up in spl_board_init is too late when MALLOC is used. Space for gd is located behind MALLOC area at the end of BRAM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Remove unused asm labelMichal Simek
It is not used at all that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Use standard interrupt_init() functionMichal Simek
Do not use microblaze specific interrupt init function. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Remove unneeded data section adding from DTBMichal Simek
DTB is added to rodata section: [ 2] .rodata PROGBITS 84c5b60c 05c60c 00c618 00 A 0 0 4 [ 3] .dtb.init.rodata PROGBITS 84c67c30 068c30 003c80 00 A 0 0 16 [ 4] .rela.dyn RELA 84c6b8b0 06c8b0 000534 0c A 0 0 4 [ 5] .data PROGBITS 84c6bde4 06cde4 001536 00 WA 0 0 16 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Add debug message about enabling interruptsMichal Simek
Add one more debug message about enabling global interrupts. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Fix coding styleMichal Simek
No functional changes just to pass checkpatch.pl. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Remove DEBUG_INT macro and use debug() insteadMichal Simek
Do not use specific macros for debugging. Also remove compilation warning: w+../arch/microblaze/cpu/interrupts.c: In function 'interrupt_handler': w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'void (*)(void *)' [-Wformat] w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'void *' [-Wformat] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Fix coding style in exception.cMichal Simek
Just coding style cleanup - no functional changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Show return address from exceptionMichal Simek
Show also return address from exception which should suggest where the problem is. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09microblaze: Fix stack usage in interrupt handlerMichal Simek
Do not save registers below r1 stack pointer because it is not checked by stack undeflow is not able to detect it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21microblaze: Support stack protection featureMichal Simek
Ensure that stack didn't rewrite important part of u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21microblaze: Enable hardware exception by defaultMichal Simek
Enable hardware exception by default to be able to handle it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-04microblaze: Add SPL supportMichal Simek
Add support for U-BOOT SPL. NOR and RAM mode are supported. There are 3 images in NOR flash. u-boot.img, dtb and kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-04microblaze: Report priviledged or stack protection exceptionMichal Simek
Just list one more exception. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-11-17Makefile: rename all libraries to built-in.oMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31microblaze: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-03-12Refactor linker-generated arraysAlbert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-11-08microblaze: Fix compilation failure because of missing libdtsMichal Simek
Microblaze platform can use CONFIG_OF_EMBED option but also it is necessary to support boards which don't want to use this option. U-Boot doesn't compile dts/libdts.o for #undef CONFIG_OF_EMBED case that's why it should be guarded by ifdef. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-07microblaze: Flush caches before enabling themMichal Simek
Flushing caches is necessary because of soft reset which doesn't clear caches. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-22common: Discard the __u_boot_cmd sectionMarek Vasut
The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22common: Add .u_boot_list into all linker filesMarek Vasut
Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-09-11microblaze: Clean microblaze initializationMichal Simek
Move board specific function to board_init function in board/ folder Remove externs from generic board.c Use board_init_f function in board.c file. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: timer: Prepare for device-tree initializationMichal Simek
Fix CONFIG_SYS_HZ usage in board config. Do not use hardcoded value. Use CONFIG_SYS_HZ instead. Separate static configuration to single block. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-09-11microblaze: intc: Coding style cleanupMichal Simek
Just coding style cleanup. Remove unneeded externs. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: intc: Registering interrupt should return valueMichal Simek
Return value to find out if un/registration was succesful. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-09-11microblaze: Add support for device tree driven board configurationMichal Simek
This is minimum code required to be able to use device-tree for u-boot initialization. Currently only for device driver initialization. Linker script change ensures DTB to be aligned for both options CONFIG_OF_EMBED and CONFIG_OF_SEPARATE. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net> CC: Simon Glass <sjg@chromium.org>
2012-07-10microblaze: intc: Clear interrupt codeMichal Simek
Clear and prepare for device-tree driven configuration. Remove CONFIG_SYS_INTC_0 definition Use dynamic allocation instead of static. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 17:13:16 +0000