aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)Author
2022-06-24microblaze: Fix early stack allocationMichal Simek
CONFIG_SYS_INIT_SP_OFFSET macro place stack to TEXT_BASE - SYS_MALLOC_F_LEN but there is no reason to do it now because board_init_f_alloc_reserve() returns exact location where stack should be. That's why stack location is calculated at run time and there is no need to hardcode it via macro. This change will help with placing U-Boot to any address. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e9aee69646e022fd8a96cbee2d2a07ab81fb6e05.1655299267.git.michal.simek@amd.com
2022-06-24microblaze: Fix stack protection behaviorMichal Simek
When U-Boot starts stack protection can be already enabled that's why setup the lowest possible SLR value which is address 0. And the highest possible stack in front of U-Boot. That's why you should never load U-Boot to the beginning of DDR. There must be some space reserved. Code is using this location for early malloc space, early global data and stack. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/86b9748bad12142659804d6381bc6bbf20be44f1.1655299267.git.michal.simek@amd.com
2022-06-24microblaze: Switch absolute branches to relativeMichal Simek
There is no reason to use absolute branches and use just relative. This change helps with moving binary to different location and start it from there. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/83a5103b85c1c2220cd3ab4d5365169c6660e40a.1655299267.git.michal.simek@amd.com
2022-06-23linker_lists: Rename sections to remove . prefixAndrew Scull
Rename the sections used to implement linker lists so they begin with '__u_boot_list' rather than '.u_boot_list'. The double underscore at the start is still distinct from the single underscore used by the symbol names. Having a '.' in the section names conflicts with clang's ASAN instrumentation which tries to add redzones between the linker list elements, causing expected accesses to fail. However, clang doesn't try to add redzones to user sections, which are names with all alphanumeric and underscore characters. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08microblaze: Migrate DCACHE/ICACHE to KconfigTom Rini
Move these two options to the arch Kconfig file. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-03-07microblaze: Do not place u-boot to reserved memory locationMichal Simek
Microblaze can also have reserved space in DT which u-boot has to avoid to placing self to that location. The same change was done in Zynqmp by commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"). This feature was tested with this memory description on kc705: memory { device_type = "memory"; reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; alloc@b00000000 { reg = <0xb0000000 0x10000000>; no-map; }; alloc@a8000000 { reg = <0xa8000000 0x00010000>; no-map; }; }; And in U-Boot log you can check u-boot relocation address and reserved locations. U-Boot 2022.01-03974-gb1b4c2dea9b9 (Feb 25 2022 - 11:59:48 +0100) Model: Xilinx MicroBlaze DRAM: 1 GiB Flash: 128 MiB Loading Environment from nowhere... OK In: serial Out: serial Err: serial Model: Xilinx MicroBlaze Net: AXI EMAC: 40c00000, phyaddr 7, interface gmii eth0: ethernet@40c00000 U-BOOT for microblaze-generic U-Boot-mONStR> bdi ... DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x40000000 ... relocaddr = 0xaff69000 ... lmb_dump_all: memory.cnt = 0x1 memory[0] [0x80000000-0xbfffffff], 0x40000000 bytes flags: 0 reserved.cnt = 0x3 reserved[0] [0xa8000000-0xa800ffff], 0x00010000 bytes flags: 4 reserved[1] [0xafe87bb0-0xafffffff], 0x00178450 bytes flags: 0 reserved[2] [0xb0000000-0xbfffffff], 0x10000000 bytes flags: 4 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/ea0a8ccce723478eb518f6fdceb91d4f129efb68.1646122398.git.michal.simek@xilinx.com
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-15microblaze: exception: fix unaligned data access register maskOvidiu Panait
The correct mask for getting the source/destination register from ESR in the case of an unaligned access exception is 0x3E0. With this change, a dummy unaligned store produces the expected info: """ >> swi r5, r0, 0x111 ... Hardware exception at 0x111 address Unaligned data access exception Unaligned word access Unaligned store access Register R5 Return address from exception 0x7f99dfc ### ERROR ### Please RESET the board ### """ Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-6-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15microblaze: exception: move unaligned access printfs inside switch caseOvidiu Panait
The unaligned access messages are only valid in the case of an unaligned data access exception. Do not print them for other types of hw exceptions. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-5-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15microblaze: exception: fix return address for delay slot exceptionsOvidiu Panait
According to the MicroBlaze reference manual (xilinx2021.2/ug984/page-37): """ If an exception is caused by an instruction in a delay slot (that is, ESR[DS]=1), the exception handler should return execution to the address stored in BTR instead of the normal exception return address stored in R17. """ Adjust the code to print the proper return address for delay slot exceptions. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-4-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15microblaze: exception: fix delay slot exception handlingOvidiu Panait
The switch statement in _hw_exception_handler() only covers the rightmost 5 bits that encode the exception cause: switch (state & 0x1f) { ... } For this reason, the "0x1000" case will never be reached, because the 13th bit was zeroed out. To fix this, move delay slot exception handling before the switch statement (delay slot (DS) bit in Exception Status Register is independent of the exception cause (EC)). Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-3-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15microblaze: exception: migrate MICROBLAZE_V5 to KconfigOvidiu Panait
Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only covers delay slot exception support. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-2-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15microblaze: exception: move privileged instruction exception out of v5 ifdefOvidiu Panait
The privileged instruction exception seems to have been introduced in microblaze v7.00 along with MMU support, so having it wrapped in MICROBLAZE_v5 ifdefs seems incorrect. Move it out of the ifdef, since all recent microblaze versions support it. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-1-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-09dts: automatically build necessary .dtb filesRasmus Villemoes
When building for a custom board, it is quite common to maintain a private branch which include some defconfig and .dts files. But to hook up those .dts files requires modifying a file "belonging" to upstream U-Boot, the arch/*/dts/Makefile. Forward-porting that branch to a newer upstream then often results in a conflict which, while it is trivial to resolve by hand, makes it harder to have a CI do "try to build our board against latest upstream". The .config usually includes information on precisely what .dtb(s) are needed, so to avoid having to modify the Makefile, simply add the files in (SPL_)OF_LIST to dtb-y. A technicality is that (SPL_)OF_LIST is not always defined, so rework the Kconfig symbols so that (SPL_)OF_LIST is always defined (when (SPL_)OF_CONTROL), but only prompted for in the cases which used to be their "depends on". nios2 and microblaze already have something like this in their dts/Makefile, and the rationale in commit 41f59f68539 is similar to the above. So this simply generalizes existing practice. Followup patches could remove the logic in those two makefiles, just as there's potential for moving some common boilerplate from all the arch/*/dts/Makefile files to the new scripts/Makefile.dts. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-20Merge tag 'doc-2022-04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request doc-2022-04-rc1 Replace @return by Return: in code comments.
2022-01-19doc: replace @return by Return:Heinrich Schuchardt
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-05microblaze: branch to base vector address on resetOvidiu Panait
Current code assumes that the vector base address is always at 0x0. However, this value is configurable for MicroBlaze using the CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR Kconfig option. Update the reset routines to branch to this location instead. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-10-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: start.S: add support for configurable vector base addressOvidiu Panait
Current code assumes that the vector base address is always at 0x0. However, this value is configurable for MicroBlaze, so update the __setup_exceptions routine to work with any vector base address. The r4 register is reserved for the vector base address inside __setup_exceptions and the function prologe/epilogue are also updated to save and restore r4. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-9-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: migrate CONFIG_SYS_USR_EXCEP to KconfigOvidiu Panait
Migrate CONFIG_SYS_USR_EXCEP to Kconfig. Also, rename it to XILINX_MICROBLAZE0_USR_EXCEP in order to match the naming convention of microblaze-generic Kconfig options. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-7-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: drop CONFIG_SYS_RESET_ADDRESS macroOvidiu Panait
Microblaze is one the last two users of the CONFIG_SYS_RESET_ADDRESS macro (the other is arch/powerpc/cpu/mpc8xx/cpu.c, but the macro is not defined anywhere in powerpc code, so it should be removed there too). Replace CONFIG_SYS_RESET_ADDRESS usage in start.S with CONFIG_SYS_TEXT_BASE. If the reset address should really be user-configurable, a new Kconfig option could be added. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-6-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: start.S: use stack space as scratch memory for endian offsetOvidiu Panait
To simpify the code, use stack space as scratch memory for endian offset calculation, rather than saving/restoring the first unused MB vector. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-5-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: Kconfig: SPL dependencies fixupOvidiu Panait
Enable SPL_LIBCOMMON_SUPPORT and SPL_LIBGENERIC_SUPPORT if CONFIG_SPL=y, in order to fix the following link failures: common/spl/spl.o: in function `board_init_r': common/spl/spl.c:755: undefined reference to `puts' ... common/spl/spl.o: in function `board_init_r': common/spl/spl.c:756: undefined reference to `hang' common/spl/spl.c:740: undefined reference to `memset' Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-4-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: spl: add board_boot_order() implementationOvidiu Panait
Microblaze has three boot modes defined in microblaze/include/asm/spl.h, but only booting from NOR flash is currently useable. Add a custom board_boot_order() implementation so that RAM and SPI boot modes can also be selected if the corresponding load-image support is present. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-3-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-05microblaze: u-boot.lds: replace __end symbol with _endOvidiu Panait
board_fdt_blob_setup() uses the _end symbol to find the dtb in the non-spl case. In order to allow microblaze builds to compile successfully with CONFIG_OF_SEPARATE, the _end symbol must be defined. Align microblaze with the other architectures and use _end symbol rather than __end to mark the end of the u-boot binary. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20211130163358.2531677-2-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-10-08image: Drop IMAGE_ENABLE_OF_LIBFDTSimon Glass
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-23lmb: Switch to generic arch_lmb_reserve_generic()Marek Vasut
Switch arc/arm/m68k/microblaze/mips/ppc arch_lmb_reserve() to arch_lmb_reserve_generic(). Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Hai Pham <hai.pham.ud@renesas.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Wolfgang Denk <wd@denx.de>
2021-04-22lmb: move CONFIG_LMB in KconfigPatrick Delaunay
Migrate CONFIG_LMB in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-20microblaze: Enable GCC garbage collector for full U-BootMichal Simek
GCC's garbage collector works for Microblaze for quite a long time but none has enabled it. The same change has be done for example by commit fac4790491f6 ("arc: Eliminate unused code and data with GCC's garbage collector"). Before: text data bss dec hex filename 588760 33592 39192 661544 a1828 u-boot After: text data bss dec hex filename 504504 32164 38608 575276 8c72c u-boot Which saves almost 15% of memory footprint. Also group symbols/functions to proper section. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-04arch: Move NEEDS_MANUAL_RELOC symbol to KconfigMichal Simek
CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be able to use compile-time checks to reduce the number of build paths. Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27xilinx: Merge together BOOT_SCRIPT_OFFSET between MB and ARMMichal Simek
There is no reason not to use commong Kconfig by Microblaze too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27microblaze: Enable spi for microblazeT Karthik Reddy
Enable SPI drivers and driver model for microblaze. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27microblaze: start.S: Use board_init_f_alloc/init in early initOvidiu Panait
Implement early init by calling generic board_init_f_alloc_reserve and board_init_f_init_reserve functions: * drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base assignment are taken care of by the generic functions * drop _gd logic Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-10-27microblaze: start.S: Factor out exception setup code to __setup_exceptionsOvidiu Panait
Currently, the exceptions setup code is duplicated in pre-relocation and post-relocation init. Factor out this code to __setup_exceptions asm routine to get rid of the duplication. __setup_exceptions is called with a relocation offset parameter (r5) which is set to zero for pre-reloc init and gd->reloc_off for post-reloc exception setup. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23microblaze: Add support for little/big endian in/out api'sT Karthik Reddy
Add read/write memory utilities for 16 and 32 bits. Add these api's for both little and big endian systems similar to arm architecture. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-01efi_loader: use CONFIG_STACK_SIZE in the UEFI sub-systemHeinrich Schuchardt
The Kconfig symbol CONFIG_STACK_SIZE is used both by ARM and Microblaze with the same meaning. Move it to menu 'General setup' so that we can use it for all architectures. Use the value of CONFIG_STACK_SIZE instead of a hard coded 16 MiB value for reserving memory in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-01Remove CROSS_COMPILE default from arch/*/config.mkTom Rini
In order to support the compiler providing information used within Kconfig itself we cannot have the compiler be determined by arch/*/config.mk as we will not be able to evaluate that yet. Given that most documentation tells people to specify CROSS_COMPILE, remove these references. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Chen <rick@andestech.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Wolfgang Denk <wd@denx.de> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-03-16Kconfig: Remove redundant variable setsTom Rini
In a few places we have Kconfig entries that set SPL_LDSCRIPT to what is the default value anyways. Drop these. Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Chen <rick@andestech.com> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> (for Microblaze) Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-20dma-mapping: add <asm/dma-mapping.h> for all architecturesMasahiro Yamada
To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 14:04:20 +0000