aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2022-01-13bloblist: Rename the SPL tagSimon Glass
Add a U_BOOT prefix to this tag since it is specific to the U-Boot project. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-13sandbox: compatibility of os_get_filesize()Heinrich Schuchardt
U-Boot define loff_t as long long. But the header /usr/include/linux/types.h may not define it. This has lead to a build error on Alpine Linux. So let's use long long instead of loff_t for the size parameter of function os_get_filesize(). Reported-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-13Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add Apple M1 watchdog timer (Mark)
2022-01-13arch/arm/mach-keystone/ddr3.c: Fix spelling of "resetting".Vagrant Cascadian
2022-01-13arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c: Fix spelling of ↵Vagrant Cascadian
"resetting".
2022-01-13arch/arm/mach-bcm283x/msg.c: Fix spelling of "Failed".Vagrant Cascadian
2022-01-13arm: apple: Use watchdog timer for system resetMark Kettenis
Rely on the new watchdog timer driver and the sysreset uclass to reset the system. This gets rid of hard-coded addresses and should work on systems based on the new M1 Pro and M1 Max SoCs as well. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
2022-01-13arm: dts: apple: Add watchdog timer nodeMark Kettenis
Add a node for the watchdog timer based on the proposed Linux device tree bindings. Remove the old reboot node which was a watchdog timert node in disguise using a preliminary device tree binding. Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
2022-01-12m68k: mcf5445x: pci: Use PCI_CONF1_ADDRESS() macroPali Rohár
mcf5445x platform uses standard format of Config Address for PCI Configuration Mechanism #1. So use new U-Boot macro PCI_CONF1_ADDRESS(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-12x86: pci: Use PCI_CONF1_ADDRESS() macroPali Rohár
x86 platform uses standard format of Config Address for PCI Configuration Mechanism #1. So use new U-Boot macro PCI_CONF1_ADDRESS(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-10Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-09Merge tag 'u-boot-amlogic-20220107' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs - meson64_android: add board specific env settings, in order to support VIM3/L for android - add changes to support VIM3/L android boot by using meson64_android.h config
2022-01-08imx8mq: Generate a single bootable flash.bin againPatrick Wildt
All i.MX8MQ boards have been converted to binman, which makes it necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to the conversion, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mq_evk.rst to remove the u-boot.itb copy step. This is a cherry-pick of 028abfd9b157 ("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-01-08udoo: Select CMD_DMFabio Estevam
CMD_DM is useful for showing the whole DM tree. Enable it via "imply CMD_DM". Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-08ARM: dts: imx6qdl-udoo: Properly describe the SD card detectFabio Estevam
GPIO7_IO00 is used as SD card detect. Properly describe this in the devicetree. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx: imx8mm: imx8mm-kontron-n801x-s: Fix binman errorAdam Ford
The binman node is part of the imx8mm-u-boot.dtsi file which is duplicated in imx8mm-kontron-n801x-s-u-boot.dtsi and causes a build error. Remove the duplicate. Fixes: 3cbb31f0e848 ("arm64: dts: imx8mm: use common binman configuration") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07board: phytec: imx8mm-phycore: Remove duplicate binman nodeAdam Ford
The binman node is part of the imx8mm-u-boot.dtsi file which is duplicated in phycore-imx8mm-u-boot.dtsi and causes a build error. Remove the duplicate. Fixes: 3cbb31f0e848 ("arm64: dts: imx8mm: use common binman configuration") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm_venice: switch to use binman to pack imagesTim Harvey
Use binman to pack images. Note that imx8mm_venice supports several boards via multiple DTB's thus in the fit node we must use: - fit,fdt-list = "of-list" - fdt-SEQ - config-SEQ Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext namingMarcel Ziswiler
Rather than using odd implicit blob-ext naming, explicitly specify the type to be of blob-ext and therefore also simplify the node naming. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07arm64: dts: imx8mm-u-boot.dtsi: explicitly add spl filenameMarcel Ziswiler
Explicitly add SPL aka u-boot-spl.bin filename. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07arm64: dts: imx8mm-u-boot.dtsi: alphabetically re-order propertiesMarcel Ziswiler
Alphabetically re-order properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07arm64: dts: imx8mm: use common binman configurationMarcel Ziswiler
With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and U-Boot proper aka u-boot.itb every board now covers such configuration in its own U-Boot specific device tree include. Move the comon part of that configuration to the common imx8mm-u-boot.dtsi include file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: use common imx8mm-u-boot.dtsiMarcel Ziswiler
Use common imx8mm-u-boot.dtsi. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: alphabetically re-orderMarcel Ziswiler
Alphabetically re-order nodes and properties. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-01-07imx: imx8mq use common imximage.cfgPeng Fan
After all these board switch to binman, we could use common imximage.cfg Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: pico-imx8mq: switch to use binmanPeng Fan
Switch to use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: imx8mq_phanbell: switch to binmanPeng Fan
Switch to binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-01-07imx: imx8mq_evk: switch to binmanPeng Fan
Switch to use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-01-07imx8mn_beacon: Fix booting hang and switch to binmanAdam Ford
Somewhere along the line, the board stopped being able to boot. Rather than just fixing the issue, let's fix the issue and migrate to binman to eliminate a warning when using custom imx tools for generating the binary. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07imx8mm_beacon: Switch to binman for generating imageAdam Ford
To eliminate a warning when using custom imx tools for generating a binary, use binman to generate flash.bin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-12-31Merge tag 'efi-next' of https://source.denx.de/u-boot/custodians/u-boot-efi ↵Tom Rini
into next Pull request of efi-next Documentation: * Add Sunxi board description UEFI: * Improvements to U-Boot running on top of UEFI
2021-12-31x86: efi: Show the system-table revisionSimon Glass
Show the revision of this table as it can be important. Also update the 'efi table' entry to show the actual address of the EFI table rather than our table that points to it. This saves a step and the intermediate table has nothing else in it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-31x86: efi: Add room for the binman definition in the dtbSimon Glass
At present only 4KB of spare space is left in the DTB when building the EFI app. Increase this to 32KB so there is plenty of space to insert the binman definition. This cannot be expanded later (as with OF_SEPARATE) because the ELF image has already been built. Signed-off-by: Simon Glass <sjg@chromium.org> Reviwed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-31x86: Don't process the kernel command line unless enabledSimon Glass
If the 'bootm' command is not enabled then this code is not available and this causes a link error. Fix it. Note that for the EFI app, there is no indication of missing code. It just hangs! Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-31x86: Allow booting a kernel from the EFI appSimon Glass
At present this is disabled, but it should work so long as the kernel does not need EFI services. Enable it and add a note about remaining work. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-28Merge tag 'video-next-20211228' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - various fixes to the sandbox display support - support for showing a logo without splash screen config - support for BMP drawing to depths other than 16bpp - tests for the different types of supported BMP images - support showing a logo when running coreboot via qemu
2021-12-27Convert CONFIG_SYS_KWD_CONFIG to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_88F5182 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CPU_FREQ_HZ to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_FREQ_HZ Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CPU_SH7751 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_SH7751 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CPU_PXA27X to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CPU_PXA27X Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27ppc: mpc83xx: Remove unused CONFIG symbolsTom Rini
Neither of these symbols are referenced anywhere else, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_83XX_PCICLK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_83XX_PCICLK Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish conversion of CONFIG_SYS_CLK_FREQ to KconfigTom Rini
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()Tom Rini
This CONFIG option is used in one of two ways. The first way is that it is defined to a static value, of an unsigned long size. The second way is that it is defined to something, typically a function, to determine this value at run time. However, in a few cases that function returns a static value. Change that to using the static value directly. In the case of using something at run time, convert everything to using a function of the same name and prototype. This will allow for further cleanups. Finally, we have a few cases where the function is just not used, so drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27arm: s5pc1xx: Move CONFIG_SYS_CLK_FREQ_C1x0 out of CONFIG namespaceTom Rini
The values CONFIG_SYS_CLK_FREQ_C100 and CONFIG_SYS_CLK_FREQ_C110 are only used in one place and not changed by the board config file. Move these out of the CONFIG namespace and in to the CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_ARCH_MAP_SYSMEM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_MAP_SYSMEM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_TPL_TEXT_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TPL_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish converting CONFIG_SYS_FSL_CLK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CLK We move the exiting option to common/Kconfig near the other options to control the contents of board_init_f() and note that this is a legacy option. We further restrict this to where the call is going to be non-empty, for the SoCs that had only been using this for some MMC-related clocks. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:28:17 +0000