aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-12-13Revert "rockchip: Add max spl size & spl header configs"Jeffy Chen
This reverts commit 10b4615f9d7e177ec7fe644fbb2616e0e0956f6e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-10sunxi: Fix H3 DRAM DQ read delay configurationJens Kuske
The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sun4i: clock: Cleanup some whitespace errorsOlliver Schinagl
Add some spaces around operators. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: twi: Enable clocks on sun7iOlliver Schinagl
Commit 6c739c5d added code to enable i2c bus 4 and 5 on the sun7i SoC but forgot to extend the range check in clock_twi_onoff, resulting in the clock not getting enabled. The range-check is not needed at all, since clock_twi_onoff only gets called with such high indexes when CONFIG_I2C3_ENABLE / CONFIG_I2C4_ENABLE is set and Kconfig already only allows these on sun6i / sun7i. This commit removes the range-check all together fixing i2c bus 4 and 5 not working on sun7i. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> [hdegoede@redhat.com] Remove range check instead of extending it Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: select SYS_NS16550 from KconfigHans de Goede
Select SYS_NS16550 from Kconfig instead of setting it in all our defconfig files. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: Add suport for A83T HomletV2 Board by Allwinnervishnupatekar
Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: dts: sun8i: Add Allwinner A83T dtsivishnupatekar
Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. This is not yet included in kernel. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: Add support for Allwinner A83T DRAMvishnupatekar
Add support for A83T dram. Register are different from sun8i A33. init code is similar to A33 dram init. hope we'll shift duplicate code in dram_sun8i_* to dram helper in future. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: clk: add basic clocks for A83Tvishnupatekar
Add basic clocks pll1, pll5, and some default values from allwinner u-boot. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com] Fix PLL6 init to run at 600 MHz instead of 288 MHz, fixing the mmc support not working [hdegoede@redhat.com] Fix PLL init code to properly wait for the PLL-s to stabilize, fixing cold-booting directly from sdcard not working Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: power: enabled support for axp818vishnupatekar
Enabled support for AXP818 in SPL and u-boot. DCDC1, DCDC2, DCDC3 and DCSC5 are enabled. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: Add support for UART0 in PB pin group on A83Tvishnupatekar
On A83T, PB9,PB10 are UART0 pins. On allwinner A83T Dev board(h8homlet), this uart0 serial connector is exposed. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: Add Machine Support for A83T SOCvishnupatekar
Allwinner A83T is octa-core cortex-a7 SOC. This enables support for A83T. SMP is not yet supported. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCsHans de Goede
According to the datasheets the max speed of AHB1 is 276 MHz, so setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, and gives us a nice speed-up in certain workloads. Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Tested-by: Chen-Yu Tsai <wens@csie.org>
2015-12-09x86: Remove HAVE_ACPI_RESUMEBin Meng
These are currently dead codes. Until we have complete ACPI support, we don't know if it works or not. Remove to avoid confusion. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: Remove CPU_INTEL_SOCKET_RPGA989Bin Meng
This Kconfig option name indicates it has something to do with cpu socket, however it is actually not the case. Remove it and move options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: Clean up ivybridge/chrome Kconfig optionsBin Meng
There are some options which are never used, and also some options which are selected by others but have never been a Kconfg option. Clean these up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: ivybridge: Remove NORTHBRIDGE_INTEL_SANDYBRIDGEBin Meng
NORTHBRIDGE_INTEL_SANDYBRIDGE is for sandybridge, not ivybridge. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: Move i8254_init() to x86_cpu_init_f()Bin Meng
Right now i8254_init() is called from timer_init() in the tsc timer driver. But actually i8254 and tsc are completely different things. Since tsc timer has been converted to driver model, we should find a new place that is appropriate for U-Boot to call i8254_init(), which is now x86_cpu_init_f(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: Fix PCI UART compatible string for crownbay and galileoBin Meng
With recent ns16550 driver changes, we only changed the legacy UART (at I/O port 0x3f8) compatible string, but forgot to change the PCI UART compatible string. Now fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-08axs10x: add support of generic EHCI USB 2.0 controllerAlexey Brodkin
This commit adds support of USB 2.0 storage media on AXS10x boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org>
2015-12-07Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini
2015-12-07zynq: sdhci: Move driver to DMMichal Simek
Move driver to DM Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07zynq: sdhci: Remove zynq_sdhci_of_init()Michal Simek
Prepare for using DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07ARM: zynq: Remove unused SERIAL macros for serial_zynqMichal Simek
Remove unused macros when driver was moved to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07net: gem: Move driver to DMMichal Simek
- Enable DM_ETH by default for Zynq and ZynqMP - Remove board_eth_init code - Change miiphy_read function to return value instead of error code based on DM requirement - Do not enable EMIO DT support by default Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-07arm: socfpga: Remove cpu_mmc_init()Marek Vasut
This function triggers the registration of the dwmmc driver on SoCFPGA, but this is not needed in case the driver is correctly probed from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2015-12-07arm: socfpga: Add SoCFPGA SR1500 boardStefan Roese
The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
2015-12-06am33xx: Update serial pdataTom Rini
We now want to make sure that we have the platform data for NS16550 when we do not have OF_CONTROL set. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05dm: tegra: Provide serial platform data for SPLSimon Glass
At present an incorrect #if term is preventing this data from being compiled in. All tegra boards use driver model for serial, so we can just drop this. Fixes: fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig") Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05rpi: get rid of BCM2835_BOARD_REV_* macrosStephen Warren
There are two numbering schemes for the RPi revision values; old and new scheme. The values within each scheme overlap. Hence, it doesn't make sense to have absolute/global names for the revision IDs. Get rid of the names and just use the raw revision/type values to set up the array of per-revision data. This change makes most sense when coupled with the next change. However, it's split out so that the mechanical cut/paste is separate from the logic changes for easier review and problem bisection. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-12-05Change e-mail address of Kamil LulkoKamil Lulko
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
2015-12-05arch/arm/cpu/arm920t/ep93xx/led.c: Mark inline functions as static inlineTom Rini
With gcc-5.x we get warning about inline non-static functions referring to static elements. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-05arm: dts: dra7-evm: add chosen node to specify serial console deviceMugunthan V N
Introduce chosen node and specify uart0 to be used as serial console. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05arm: dts: omap: add reg-shift to serial device tree nodeMugunthan V N
With the commit 'c7b9686d5d48 ("ns16550: unify serial_omap")' all TI platforms are broken with DM/DT boot as ns16550 driver expects reg-shift from DT which is not populated for TI platforms. Earlier it worked as it was hard coded to 2 in serial-omap driver. So adding the reg-shift to serial nodes for dra7, am4372 and am33xx dtsi files. Tested this patch on am437x-sk-evm, am437x-gp-evm, am335x-boneblack, dra74x-evm and dra72x-evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05common: bootm: check return value of strict_strtoulPeng Fan
Before continue, check return value of strict_strtoul. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Simon Glass <sjg@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: York Sun <yorksun@freescale.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-04Merge branch 'master' of http://git.denx.de/u-boot-sparcTom Rini
2015-12-04Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-12-03sparc: Remove non-generic board init files: board.c, time.cFrancois Retief
Remove the board.c and time.c files and all associated non-generic board initialization code. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: leon3: Added busy wait function, made wait_ms() work when IRQ is disabledDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03sparc: leon3: Added CPU count and frequency detection.Daniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03sparc: Removed USB stop from linux bootm, arch-independent bootm stop USBDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03sparc: Add CONFIG_DISPLAY_BOARDINFO variable to all LEON boardsFrancois Retief
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: Update PROM initialization code for generic boardFrancois Retief
Fixed the prom_relocate() function in start.S file by reserving memory in the board_init_f sequence and saving the offset to the __prom_start_reloc variable. This value is used as the destination when relocating the PROM. Add the prom_init() function to the end of the board_init_r sequence. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: Update cpu_init.c to use generic timer infrastructureFrancois Retief
Introduce the CONFIG_SYS_TIMER_* macros in include/asm/config.h to make use of the generic timer infrastructure in lib/time.c. Created a timer_init() function to initialize the timer hardware and update the #ifdef in board_init_f to allow this function to be called during the start-up sequence. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: leon2: Updates for generic board initializationFrancois Retief
Reworked the LEON2 start.S code to call board_init_f function at startup. Also implemented the relocate_code function in assembly to relocate the monitor and setup the stack pointer before calling relocated board_init_r. Add the CONFIG_SYS_GENERIC_BOARD variable to all the LEON2 boards. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: leon3: Updates for generic board initializationFrancois Retief
Reworked the LEON3 start.S code to call board_init_f function at startup. Also implemented the relocate_code function in assembly to relocate the monitor and setup the stack pointer before calling relocated board_init_r. Add the CONFIG_SYS_GENERIC_BOARD variable to all the LEON3 boards. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: leon3: Clear all unused GPTIMER registers.Daniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03sparc: leon3: Move ambapp_bus_init() call to arch_cpu_init() functionFrancois Retief
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: leon3: Move snoop detection from startup.S to arch_cpu_init()Francois Retief
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03sparc: Initial ground work for generic board initializationFrancois Retief
Initial ground work in preperation for generic board initialization code for the SPARC architecture. Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 12:37:40 +0000