aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-01-25sunxi: add support for H616 uart0Jernej Skrabec
This port is used for debug terminal on all known H616 boards. Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: introduce support for H616 clocksJernej Skrabec
H616 has mostly the same clocks as H6 with some small differences. Just reuse H6 clocks for H616 and handle differences with macros. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: support loading with SPL > 32KBAndre Przywara
H616 supports and needs bigger SPL than 32 KiB, mostly due to big DRAM driver and need for PMIC configuration, which pulls several drivers which are not needed otherwise. spl_mmc_get_uboot_raw_sector() will now compare pre-configured size with that, reported in SPL header. If size in header is bigger, it will use that value instead. In the process of function rework, also add missing function argument. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-01-25sunxi: Add support for I2C on H6 like SoCsJernej Skrabec
I2C support, especially R_I2C port, will be needed in future. Upcoming support for H616 will need R_I2C to adjust DRAM voltage. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: prcm: Add memory map for H6 like SoCsJernej Skrabec
There was no need to have prcm definitions for H6 and similar SoCs till now. However, support R_I2C will be needed soon in SPL. Move old definitions to prcm_sun6i.h and add new ones in prcm_sun50i.h. One of those files will be selected in common prcm.h based on defined macros. This commit doesn't do any functional change. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25mmc: sunxi: Replace H6 ifdefs with H6 gen macroJernej Skrabec
It turns out that several SoCs share same mmc configuration as H6. In order to lower ifdef clutter replace H6 specific macro with common one. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Introduce common symbol for H6 like SoCsJernej Skrabec
It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Add support for AXP305 PMICJernej Skrabec
This PMIC can be found on H616 boards and it's very similar to AXP805 and AXP806. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Add support for Orange Pi 3Andre Heider
dts file is taken from Linux 5.11-rc1 tag. The Bluetooth controller of this device ships with a default address, use the new CONFIG_FIXUP_BDADDR option to fix it up. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> [Updated OrangePi 3 DT, rebase and config update] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25sunxi: Add support for Tanix TX6Jernej Skrabec
This commit adds support for Tanix TX6 TV box, based on H6. It's low end H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other peripherals. DT file is taken from Linux 5.11-rc1 release. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25ARM: dts: sunxi: h6: Update DT filesJernej Skrabec
Updated H6 DT files are based on Linux 5.11-rc1 release. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25Merge tag 'u-boot-imx-20210125' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Changes for 2020.04 ------------------- - new board: Phytec phyCORE-i.MX8MP i.MX8MN Beacon EmbeddedWorks devkit - Fixes: several nanbcb fixes fix for imx8mm_beacon - further switch to distro boot commands - DM: DM Ether for MX6UL CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6013
2021-01-25Merge tag 'u-boot-atmel-2021.04-b' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features for 2021.04 cycle This feature set includes macb updates for all interfaces and new sama7g5 variant support; micrel ksz9031 DLL support; a new board from Giant based on Adafruit feather form factor which contains a SAMA5D27 SoC; several fixes regarding the NAND flash PMECC block; and pincontrol drive strength support for pio4 controller.
2021-01-23ARM: imx: add i.MX8MN lpddr4 image cfg fileMarek Vasut
Add cfg file for i.MX8MN LPDDR4 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-01-23imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford
Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-01-23spi: imx: Define register bits in the driverMarek Vasut
The CSPI/ECSPI register bits do not differ between newer SoCs, instead of having multiple copies of the same thing for each iMX SoC, define the bits in the driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de>
2021-01-23arm64: dts: imx8mm-beacon: Resync imx8mm-beacon-som with 5.11-rc4Adam Ford
In order to support the QSPI chip on the SOM, the Flexspi bus needs to be configured to talk with the SPI chip. Resync the som device tree with 5.11-rc4 Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2021-01-23board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP supportTeresa Remmet
Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-23arm: dart6ul: enable DM_ETH for the dart6ulMarc Ferland
This patch converts the dart6ul ethernet support to DM_ETH and cleans up the legacy ethernet code. The clean up, more specifically: * moves the fec2 node and pin definition to the carrier board DTS since the phy associated with it is on the carrier board and not on the SoM; * add the reset pin associated to each phy; * separate the ethernet, mdio and reset pins of each fec so that they are easier to reference; * add clock properties to the phy nodes since they are connected to the 50Mhz ENET[12]_TX_CLK clock of the SoC; * remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
2021-01-23imx: timer: Modify GPT timer driver for mx7Ye Li
Modify the GPT common platform driver for mx7 which only use 24Mhz OSC as clock source. Note: at default, the mx7d will use system counter as timer. The GPT is disabled. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx8m: add QSPI boot devPeng Fan
When boot type could not be detected from rom sw info, read sbmr1 to detect, here we only use it to detect FLEXSPI boot, because ROM not update it in rom sw info. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx6: Remove AHCI device before boot OSYe Li
Since we remove SATA device before boot OS, when AHCI is enabled, update the codes to remove AHCI device. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: Fix market segment fuse offset on iMX8MPYe Li
iMX8MP has shifted market segment fuse one bit from 0x440 [7:6] to [6:5], correct it in imx common codes. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23nandbcb: nand support for i.MX8MPHan Xu
Add NAND boot support for i.MX8MP by adding i.MX8MP in nandbcb support list, reading boot_search_count from fuse. i.MX8MN NAND boot is same as i.MX8MP, fix some issues as well. Signed-off-by: Han Xu <han.xu@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: nandbcb: Fix potential overflow in nandbcb_set_boot_configYe Li
Fix Coverity Issue 9006656. In nandbcb_set_boot_config, an integer overflow occurs, with the result converted to a wider integer type. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: nandbcb: Fix potential overflow in fill_dbbt_dataYe Li
Fix Coverity Issue 9006658. In fill_dbbt_data, an integer overflow occurs, with the result converted to a wider integer type Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: nandbcb: Fix resource leak in read_fcbYe Li
Fix Coverity Issue 9006657. In read_fcb, leak of memory to system resource "fcb_raw_page". Adjust the sequence to check the mtd bad block prior than allocation of "fcb_raw_page", also check the NULL return of allocation. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: nandbcb: Fix resource leakYe Li
Fix Coverity Issue 9006655. In write_fcb, leak of memory to resource "fcb_raw_page". Since we have initialized the "ret" to 0, should return the value of ret. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23nandbcb: Fix uninitialized variableYe Li
Fix Coverity Issue 9006654. In write_fcb, use of an uninitialized variable "ret". Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx8m: lowlevel_init: tune alignmentPeng Fan
The minimum alignment is 16 bytes, so use align 4 is enough. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23arm: dts: imx8mq: sync dts from Linux KernelPeng Fan
Sync dts from Linux Kernel commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23arm: dts: imx8mm: sync dts from Linux KernelPeng Fan
Sync dts from Linux Kernel commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23arm: dts: imx8mp: sync dts from Linux KernelPeng Fan
Sync dts from Linux Kernel commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx8m: clock: add type of set_clk_eqosPeng Fan
Add type of set_clk_eqos to make it could be used by other files. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23arm: dts: imx8mn: sync dts from Linux KernelPeng Fan
Sync dts from Linux Kernel commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK boardPeng Fan
use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board, we will use CONFIG_TARGET_IMX8MN_EVK for LPDDR4 EVK board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23imx: imx8mp_evk: enable eth supportPeng Fan
Add board code to configure the network interface Add net defconfig Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsung.gitTom Rini
2021-01-22ARM: at91: spl: add spl_early_init for sama5d2 platformsGreg Gallagher
The dm root node is needed early in the spl to allow the timer to be used. This change calls spl_early_init to initialize the dm root node. Signed-off-by: Greg Gallagher <greg@embeddedgreg.com>
2021-01-22board: atmel: Add SAMA5D27 giant boardGreg Gallagher
Giant board is a tiny SBC based on the Adafruit Feather form factor, created by groboards it contains a SAMA5D2 processor (SAMA5D27), 128 MB of RAM and a microSD card for storage. Signed-off-by: Greg Gallagher <greg@embeddedgreg.com>
2021-01-22sam9x60.h: Fix Galois Field Table offsetsKai Stuhlemmer (ebee Engineering)
Because ATMEL_BASE_ROM is defined to 0x100000, it already points to the begin of the index table for 512 byte sectors correction. Thus its offset must be zero and the index of the table for 1024 byte sectors must start at offset 0x8000. Signed-off-by: Kai Stuhlemmer (ebee Engineering) <kai.stuhlemmer@ebee.de> [ta: update commit message] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2021-01-22sama5d3: Fix Galois Field Table offsetsTudor Ambarus
Offsets are described in the datasheet at section: "11.4.4.2 NAND Flash Boot: PMECC Error Detection and Correction". For testing I "injected" bit flips into u-boot NAND memory area, and then read back. PMECC could not correct the errors. With the offsets updated everything is fine. Fixes: 3225f34e5c ("ARM: atmel: add sama5d3xek support") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2021-01-22pinctrl: at91-pio4: implement drive strength supportEugen Hristev
Implement drive strength support, by preserving the same bindings as in Linux. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-21rockchip: rk3328: Add support for FriendlyARM NanoPi R2SDavid Bauer
This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2021-01-21arm: dts: rockchip: rk3399: enable rng at the SoC levelPeter Robinson
The rng is embedded in the SoC so enable it in the device tree universally, the use of it can be controlled by enabling/disabling at the device config level. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2021-01-21rockchip: leez-rk3399: Provide init voltageKever Yang
Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-01-21rockchip: firefly-rk3399: Provide init voltageKever Yang
Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-01-21rockchip: evb-rk3399: Provide init voltageKever Yang
Add missing regulator-init-microvolt property to vdd_center regulator. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-01-21rockchip: puma-haikou: default to SPI bus 1 for SPI-flashHugh Cole-Baker
SPI flash on this machine is located on bus 1, default to using bus 1 for SPI flash and stop aliasing it to bus 0. Formerly the alias spi1 pointed to &spi5, use an alias spi5 for this instead. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Suggested-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2021-01-21rockchip: rk3399-roc-pc: default to SPI bus 1 for SPI-flashHugh Cole-Baker
SPI flash on this board is located on bus 1, default to using bus 1 for SPI flash on both rk3399-roc-pc and -mezzanine, and stop aliasing it to bus 0. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Suggested-by: Simon Glass <sjg@chromium.org> Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob") Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:09:44 +0000