aboutsummaryrefslogtreecommitdiff
path: root/board/engicam
AgeCommit message (Collapse)Author
2023-07-25MAINTAINERS: Add a number of "common" directoriesTom Rini
A number of platforms have "common" directories that are in turn not listed by the board MAINTAINERS file. Add these directories in many cases. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30arm64: imx8mm: imx8mn: imx8mp: Drop FEC GPR[1] board workaroundMarek Vasut
The FEC interface mode is now configured in common board_interface_eth_init() and called by FEC MAC driver when appropriate. Drop the board side duplicates if the same functionality. Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-30arm64: imx8mp: Drop EQoS GPR[1] board workaroundMarek Vasut
The EQoS interface mode is now configured in common board_interface_eth_init() and called by EQoS MAC driver when appropriate. Drop the board side duplicates if the same functionality. Signed-off-by: Marek Vasut <marex@denx.de>
2023-02-10Correct SPL uses of FEC_MXCSimon Glass
This converts 4 usages of this option to the non-SPL form, since there is no SPL_FEC_MXC defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL uses of ENV_IS_IN_UBISimon Glass
This converts 2 usages of this option to the non-SPL form, since there is no SPL_ENV_IS_IN_UBI defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL uses of DWC_ETH_QOSSimon Glass
This converts 3 usages of this option to the non-SPL form, since there is no SPL_DWC_ETH_QOS defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-31engicam: imx6: migrate to DM_SERIALMichael Trimarchi
Add the needed DT overrides and configs to enable UART in SPL. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30ARM: imx: Remove PMIC reset configuration from board filesMarek Vasut
The PCA9450 reset configuration can now be performed by the PCA9450 PMIC driver itself, remove the hard-coded variant from board code and let the PMIC driver perform this task using one-liner: ``` $ sed -i '/set WDOG_B_CFG to cold reset/,+2 d' $(git grep -l PCA9450_RESET_CTRL.*0xA1 board/) ``` Venice and i.MX93 EVK required slight manual fix up. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-01-16ram: rockchip: Add common ddr type configsJagan Teki
We have common ddr types in rockchip or in general. So use the common ddr type names instead of per Rockchip SoC to avoid confusion. The respective ddr type names will use on the associated ddr SoC driver as these drivers are built per SoC at a time. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-10-24board: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter KitManoj Sai
i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam. i.Core MX8M Plus needs to mount on top of this Evaluation board for creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
2022-10-18stm32mp: fix compilation issue with DEBUG_UARTPatrick Delaunay
Fix the compilation issue when CONFIG_DEBUG_UART is activated drivers/serial/serial_stm32.o: in function `debug_uart_init': drivers/serial/serial_stm32.c:291: undefined reference to \ `board_debug_uart_init' The board_debug_uart_init is needed for SPL boot, called in cpu.c::mach_cpu_init(); it is defined in board/st/stm32mp1/spl.c. But with the removal #ifdefs patch, the function debug_uart_init() is always compiled even if not present in the final U-Boot image. This patch adds a file to provided this function when DEBUG_UART and SPL are activated. Fixes: c8b2eef52b6c ("stm32mp15: tidy up #ifdefs in cpu.c") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05nxp: Make board/freescale/common/Kconfig safe to include once in arch/KconfigTom Rini
The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17board: engicam: stm32mp1: convert to livetreePatrick Delaunay
Replace gd->fdt_blob access with fdt_getprop() function to the function ofnode_get_property() to support a live tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-14imx: engicam-imx8mm: drop unused macroPeng Fan
Drop unused WDOG macro Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-06-14imx: imx8mm_icore: Enable SPL_DM_SERIALPeng Fan
Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2021-12-24engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OFJagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-08board: stm32: Remove the bi_boot_params initializationPatrick Delaunay
The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OFJagan Teki
7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Linux dts commit details: commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 boardJagan Teki
MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Linux dts commit details: commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Carrier board for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. Linux dts commit details: commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Evaluation board for creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. Linux dts commit details: commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-30rockchip: Add Engicam PX30.Core C.TOUCH 2.0Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30rockchip: Add Engicam PX30.Core EDIMM2.2 Starter KitJagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam. PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30board: engicam: Attach i.MX6 common codeJagan Teki
The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful. Add support for it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-07board: engicam: Fix the ethernet clock initializationMichael Trimarchi
According to the SOM and reference board the clock can be taken from the external pin or provided from ENET_REF_CLK. Add a new function that make the proper set according the board type. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07board: engicam: Cleanup fdt file and board mappingMichael Trimarchi
Make easy to map fdt file to board in order to use this information later to apply specific change to specific board combination. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move command functions out of common.hSimon Glass
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move serial functions out of common.hSimon Glass
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-19board: engicam: Remove bogus check for mmc for imx6ul isiotShyam Saini
imx6ul-isiot-mmc.dts was removed in uboot version v2018.03 and from then onwards IMX6UL isiot uses imx6ul-isiot-emmc.dts for mmc, so remove unnecessary check for mmc. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13board: engicam: Add watchdog support on EngicamShyam Saini
This patch adds watchdog support for engicam imx6 family of boards. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2018-07-23i.MX6: engicam: gpr_init can be called only for some architectureMichael Trimarchi
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-27imx6ul: geam: Fix fdt_file mismatchJagan Teki
fdt_file is looking for imx6ul-geam-kit.dtb but Linux has imx6ul-geam.dtb, since Linux skipped -kit on file name by below commit. "ARM: dts: imx6ul-geam: Skip suffix -kit from dts name" (sha1: 182de5ebce71e469cfa686fcdf08c9cbe11ece97) So, due to this mismatch U-Boot failed to pick the proper dtb which eventually break the Linux boot. This patch fixed this mismatch by - renaming dts files - update config option to use new dtb file - update fdt_file to new dtb file name Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18board: engicam: spl: match icore-mipi fit-configJagan Teki
Match imx6q-icore-mipi and imx6dl-icore-mipi dtb in board_fit_config_name_match. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:40:15 +0000