aboutsummaryrefslogtreecommitdiff
path: root/board/k+p
AgeCommit message (Collapse)Author
2022-04-28led: Drop led_default_state()Marek Vasut
This function is empty, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Steven Lawrance <steven.lawrance@softathome.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30kp_imx53: Switch to using a local namespace for ID EEPROMTom Rini
This platform does not use any of the standard EEPROM functionality and instead provides its own. Use a local namespace for the I2C related defines to access the EEPROM. Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-07-07bootstage: Eliminate when not enabledTom Rini
When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-01arm: Implement show_boot_progress() for imx53's HSC and DDC devicesLukasz Majewski
This patch provides information regarding the boot stage with using LEDs. On the very beginning of U-Boot execution the GREEN LED is turned on. When the execution is passed to Linux kernel the GREEN LED is off and RED one is ON. Afterwards, when Linux takes over the execution, the "heartbeat" driver provides indication if the board is still alive. Please also note that this patch uses {set|clr}bits_le32 macros as turning ON GREEN LED is performed in a _very_ early stage of U-Boot execution before DM_GPIOs are initialized. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-18imx: pmic: Set proper pmic name for iMX53 HSC|DDC boardsLukasz Majewski
After the commit 4213609cc7fb ("drivers: core: use strcmp when find device by name") the exact DTS node name for PMIC device must be provided. This patch fixes this issue by providing full DTS node name ('mc34708@8'). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chug <jh80.chung@samsung.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-13imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-bootLukasz Majewski
This patch converts the TPC70 to use driver model and device tree description in both SPL and u-boot proper. Notable changes (DM/DTS conversion): - PINCTRL{_IMX6} - DM_I2C - enable 'regulator' and 'pmic' commands - DM_MMC and BLK (USDHC) - DM_ETH - DM WDT (including SYSRESET) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: led: Enable LED default stateLukasz Majewski
This change sets the default state of LEDs on TPC70. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: cosmetic: Replace magic numbers when setting ENET clockLukasz Majewski
This is a cosmetic change, just to use proper define instead of magic numbers. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD bootLukasz Majewski
The TPC70 can boot from SD card (debug/development) and eMMC (production). The board_boot_order() function provides a run time check for the device from which one wants to boot (it is selected by GPIO pins setup). Moreover, a fallback to SD card is provided if the detection is not possible or working properly. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-06-23Convert to use fsl_esdhc_imx for i.MX platformsYangbo Lu
Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-04-25boot.src: Provide dsa_core.blacklist bootarg when booting via NFSLukasz Majewski
This setup is a bit special as Linux kernel (4.19) is not supporting in-kernel NFS rootfs mount and Distributed Switch Architecture (DSA) operation. For that reason it was necessary to provide a bootarg to allow userspace enable it afterwards if needed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove EHCI specific code from HSC|DDC board fileLukasz Majewski
As EHCI on i.MX5 has been converted to driver model, the board specific code, necessary for VBUS USB power supply setup is not needed anymore. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related filesLukasz Majewski
After switching to DM/DTS support of esdhc3 - the code in this patch can be removed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTSLukasz Majewski
After commit efd0b791069a ("eth: dm: fec: Add gpio phy reset binding") the in-board file definition of ETH PHY reset can be removed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-09-14ARM: bootscript: For nfsargs only use rootpath (and remove not needed serverip)Lukasz Majewski
The serverip part is provided from DHCP server with 'option root-path "192.168.3.1:/srv/tftp/rootfs";' parameter in dhcpd.conf Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-09-14ARM: bootscript: Fix the nfsargs and addip in K+P's tpcboot.cmdLukasz Majewski
The quotes around ${bootargs} were missing as we elaborate those variables twice - once when we "setenv" the command and secondly when we "run" it. Without quotes we have just empty string in the second call. Moreover there is an issue with line breaks - as the original commands got truncated. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-09-14ARM: bootscript: Replace tftpboot with dhcp when downloading kernelLukasz Majewski
The 'dhcp' command is more versatile as it allows working with the DHCP server to obtain serverip, ipaddress and other network parameters. The configuration necessary to obtain the serverip (dhcpd.conf): option option-150 code 150 = ip-address; and in the subnet definition: option option-150 192.168.X.Y; Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-09-14ARM: bootscript: Remove hard-coded rootpath from K+P's tpcboot.cmdLukasz Majewski
The 'rootpath' can be provided by DHCP server. Removing this line prevents from overwriting it. To do that on the DHCP server side (isc-dhcp-server) modify dhcpd.conf and add 'option root-path "192.168.X.Y:/srv/tftp/rootfs";' Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Remove not needed function for the K+P's imx53 boardLukasz Majewski
The get_board_rev() is not needed anymore as a generic function for the imx53 SoC has been used instead. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Add support for KEY1 status detection on K+P's HSC|DDC boardsLukasz Majewski
This code provides information if the K+P's imx53 boards had KEY1 pressed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Adjust K+P script to run misc (per board) adjustmentsLukasz Majewski
This change gives the opportunity to adjust Linux command line for the imx53 device with some legacy data. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: imx53: Always disable display before starting kernelLukasz Majewski
This patch prevents from the situation where we may end up with garbage displayed on the LCD panel. Such situation occurs when one performs "reboot -f" in Linux and then stop in U-boot (or observe the garbage on the screen during boot up). To prevent from such situation - the PWM pin is configured as GPIO and set to LOW. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18Fixup various SPDX tags from the latest mergeTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18arm: imx53: Add support for imx53 boards from K+PLukasz Majewski
This commit adds support for DDC and HSC boards from K+P in u-boot. Console output: U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Model: K+P iMX53 DRAM: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Module EEPROM: ID: TQMa53-CB.0401 SN: 63152762 MAC: 00:0b:64:03:14:2a BBoard:40x0 Rev:10 Net: eth0: ethernet@63fec000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15boot: script: The boot.scr file for K+P's boardsLukasz Majewski
By using this file one can avoid cluttering <board>.h file with u-boot HUSH commands necessary for booting target device. With such approach the commands are stored only in one place and can be reused if needed. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-04-15imx: board: Add support for the K+P's kp_imx6q_tpc boardLukasz Majewski
This commit provides support for Kieback & Peter GmbH IMX6Q based TPC board. U-boot console output: U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) Trying to boot from MMC1 U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 37C Reset cause: POR Board: K+P KP_IMX6Q_TPC i.MX6Q Watchdog enabled I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: FEC [PRIME] Autoboot in 3 seconds
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 05:53:41 +0000