aboutsummaryrefslogtreecommitdiff
path: root/board/rockchip
AgeCommit message (Collapse)Author
2023-12-13maintainers: rk3399: remove maintainerShantur Rathore
Remove Akash Gajjar <akash@openedev.com> from MAINTAINERS as email is bouncing. Signed-off-by: Shantur Rathore <i@shantur.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-24board: rockchip: Add Xunlong Orange Pi 5 PlusJonas Karlman
Xunlong Orange Pi 5 Plus is a single-board computer based on the Rockchip RK3588 SoC. The board provides abundant interfaces, including two HDMI output ports, one HDMI input port, two 2.5G Ethernet ports, M.2 M-Key slot, M.2 E-Key slot, two USB 3.0, two USB 2.0, and two Type-C. Features tested on a Orange Pi 5 Plus 4GB v1.2: - SD-card boot - eMMC boot - SPI Flash boot - PCIe/NVMe - USB 2.0 host - Ethernet Device tree is imported from linux v6.7-rockchip-dts64-1 tag. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-24board: rockchip: Add Xunlong Orange Pi 5Jonas Karlman
Xunlong Orange Pi 5 is a single-board computer based on the Rockchip RK3588S SoC. The board provides abundant interfaces, HDMI output, GPIO interface, M.2 PCIe2.0, Type-C, Gigabit LAN port, 2*USB2.0, 1*USB3.0, etc. Features tested on a Orange Pi 5 4GB v1.2: - SD-card boot - SPI Flash boot - PCIe/NVMe - USB 2.0 host - Ethernet Device tree is imported from linux v6.7-rockchip-dts64-1 tag. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-09board: Remove essentially empty board files and MakefilesTom Rini
As part of reviewing a new platform, Daniel Schwierzeck noted that we can have an empty Makefile in the board directory and don't need an empty board.c file as well. Further with further cleanup in the Makefile we can now omit the Makefile entirely. Remove a number of now unnecessary board.c and Makefiles. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-07board: rockchip: Add Bananapi R2Pro BoardFrank Wunderlich
Add Bananapi R2 Pro board. tested: - sdcard - both front usb-ports - sata - wan-port lan-ports are connected to mt7531 switch where driver needs to be separated from mtk ethernet-driver. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
2023-10-07rockchip: board: Add minimal generic RK3566/RK3568 boardJonas Karlman
Add a minimal generic RK3566/RK3568 board that only have eMMC and SDMMC enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3566/RK3568 boards that follow reference board design. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-17board: rockchip: rk35xx: Add myself as reviewer to MAINTAINERSJonas Karlman
Add myself as a reviewer for RK3566/RK3568/RK3588 boards that I have and can help with review and testing of defconfig and device tree changes. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-17board: rockchip: rk35xx: Add device tree files to MAINTAINERSJonas Karlman
Update MAINTAINERS files for RK3566/RK3568/RK3588 boards to include related device tree files. Also replace space with tabs. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-08-12rockchip: MAINTAINERS: fix board name for Radxa ROCK 4C+FUKAUMI Naoki
align with other ROCK series. Fixes: 2b506407c8 ("rockchip: Add MAINTAINERS entry for Radxa Rock 4C+") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12rockchip: rk3568: Add EmbedFire Lubancat 2 supportAndy Yan
LubanCat2 is a rk3568 based SBC from EmbedFire. Specification: - Rockchip rk3568 - LPDDR4/4X 1/2/4/8 GB - TF scard slot - eMMC 8/32/64/128 GB - Gigabit ethernet x 2 - HDMI out - USB 2.0 Host x 1 - USB 2.0 Type-C OTG x 1 - USB 3.0 Host x 1 - Mini PCIE interface for WIFI/BT module - M.2 key for 2280 NVME - 40 pin header The dts file is sync from linux mainline. Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Radxa E25 Carrier BoardJonas Karlman
Radxa E25 is a network application carrier board for the Radxa CM3I SoM with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key, USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header. Features tested on a Radxa E25 v1.4: - SD-card boot - eMMC boot - USB host - PCIe/Ethernet adapters is detected - SATA Device tree is imported from linux next-20230728. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2023-07-28arm: rockchip: Add Radxa ROCK 4SEChristopher Obbard
Add board-specific devicetree/config for the RK3399T-based Radxa ROCK 4SE board. This board offers similar peripherals in a similar form-factor to the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor (which has different OPP table than the RK3399) and other minimal hardware changes. Kernel tag: next-20230719 Kernel commits: - 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28rockchip: evb_rk3229: Update/fix READMEAlex Bee
This updates the evb_rk3229's README on howto create / use the FIT image created by binman. Also fix some wrong paths and update filenames which have changed in recent upstream optee-os versions. Signed-off-by: Alex Bee <knaerzche@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28rockchip: rk3568: Add support for FriendlyARM NanoPi R5CTianling Shen
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device. Specification: - Rockchip RK3568 - 1/4GB LPDDR4X RAM - 8/32GB eMMC - SD card slot - M.2 Connector - 2x USB 3.0 Port - 2x 2500 Base-T (PCIe, r8125) - HDMI 2.0 - MIPI DSI/CSI - USB Type C 5V The device tree is taken from kernel v6.4-rc1. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28rockchip: rk3568: Add support for FriendlyARM NanoPi R5STianling Shen
FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device. Board Specifications - Rockchip RK3568 - 2 or 4GB LPDDR4X - 8GB or 16GB eMMC, SD card slot - GbE LAN (Native) - 2x 2.5G LAN (PCIe) - M.2 Connector - HDMI 2.0, MIPI DSI/CSI - 2xUSB 3.0 Host - USB Type C PD, 5V/9V/12V - GPIO: 12-pin 0.5mm FPC connector The device tree is taken from kernel v6.4-rc1. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28rockchip: rk3328: Add support for Orange Pi R1 Plus LTSTianling Shen
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with the on-board NIC chip changed from rtl8211e to yt8531c, and RAM type changed from DDR4 to LPDDR3. The device tree is taken from kernel v6.4-rc1. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28rockchip: rk3328: Add support for Orange Pi R1 PlusTianling Shen
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. The device tree and description are taken from kernel v6.3-rc1. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-25rockchip: Add MAINTAINERS entry for Radxa Rock 4C+Tom Rini
This defconfig was added without a MAINTAINERS entry, add one. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-12Merge tag v2023.07-rc4 into nextTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-08efi_loader: add the number of image entries in efi_capsule_update_infoMasahisa Kojima
The number of image array entries global variable is required to support EFI capsule update. This information is exposed as a num_image_type_guids variable, but this information should be included in the efi_capsule_update_info structure. This commit adds the num_images member in the efi_capsule_update_info structure. All board files supporting EFI capsule update are updated. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-05-09rockchip: rk3328: Add support for FriendlyARM NanoPi R2CTianling Shen
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. The device tree is taken from the kernel linux-next branch: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=004589ff9df5b75672a78b6c3c4cba93202b14c9 Signed-off-by: Tianling Shen <cnsztl@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-21board: rockchip: Add rk3588 evbKever Yang
rk3588 evb1 v10 is a evalution board from Rockchip, it is a dev board for rockchip and also a reference board for board vendors. Hardware: SoC: RK3588 DRAM: LPDDR4X 8GB Debug: UART2 via USB PCIe: 3x4 *1 SATA *2 HDMI out *2 HDMI IN *1 USB2.0 Host *2 USB3.0 Host *1 Type C *1 MIPI DSI panel dts Sync from Linux v6.2. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@edgeble.ai>
2023-02-28evb-rk3568: Update MAINTAINERS and documentationChris Morgan
Update the MAINTAINERS file to include the devicetree for the rk3568-evb1-v10 board. Also update Rockchip board docs to include information on building RK3568 based devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28board: rockchip: Add Radxa Compute Module 3 IO BoardJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-02-28arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-09Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORTSimon Glass
This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-10-19rockchip: rk3399: Add EAIDK-610 supportAndy Yan
Specification - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 work in otg mode - 12V DC Power supply The dts file is sync from linux-next[0]. [0]:https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18board: rk3288: add more DT files to MAINTAINERSJohan Jonker
A number of rk3229/rk3288 DT files are synced from Linux. Add a maintainer to look after them and to help with review and testing. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30board: dts: rockchip: Add NanoPi M4BAlexandre Vicenzi
Add initial support for NanoPi M4B, a minor revision of the original NanoPi M4. Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4: "arm64: dts: rockchip: Add NanoPi M4B board" (sha1: c7b03115003f7f337ab165542cee37148cf30a8a) Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com> Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
2021-03-30arm64: rk3399: Add support NanoPi R4sXiaobo Tian
NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support, including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port. port.It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1]. [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6 Signed-off-by: xiaobo <peterwillcn@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-21rockchip: rk3328: Add support for FriendlyARM NanoPi R2SDavid Bauer
This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-09-16rockchip: rv1108: use correct API for board callbackKever Yang
Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07arm64: dts: rockchip: Add Radxa Rock Pi N10 initial supportJagan Teki
Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has - VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC. So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files. rk3399pro-rock-pi-n10.dts was synced from linux-next v5.7-rc1. Tested - ROCK PI N10 Model B - ROCK PI N10 Model C - Boot from SD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3328: add rock-pi-e-rk3328_defconfig fileb.l.huang
This commit add the default configuration file and relevant description for rock-pi-e board Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-02rockchip: Remove ARCH= references from documentationTom Rini
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-01rockchip: rk3399: Add Nanopi M4 2GB board supportDeepak Das
commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01rockchip: rk3328: Add support for ROC-RK3328-CC boardChen-Yu Tsai
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: evb-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:23:16 +0000