aboutsummaryrefslogtreecommitdiff
path: root/board/st/stm32mp1
AgeCommit message (Collapse)Author
2023-06-08efi_loader: add the number of image entries in efi_capsule_update_infoMasahisa Kojima
The number of image array entries global variable is required to support EFI capsule update. This information is exposed as a num_image_type_guids variable, but this information should be included in the efi_capsule_update_info structure. This commit adds the num_images member in the efi_capsule_update_info structure. All board files supporting EFI capsule update are updated. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-19stm32mp: fix various array bounds checksRasmus Villemoes
In all these cases, the index on the LHS is immediately afterwards used to access the array appearing in the ARRAY_SIZE() on the RHS - so if that index is equal to the array size, we'll access one-past-the-end of the array. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-02-09Correct SPL use of FDT_SIMPLEFBSimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_FDT_SIMPLEFB defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL uses of ENV_IS_IN_UBISimon Glass
This converts 2 usages of this option to the non-SPL form, since there is no SPL_ENV_IS_IN_UBI defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL uses of EFI_HAVE_CAPSULE_SUPPORTSimon Glass
This converts 13 usages of this option to the non-SPL form, since there is no SPL_EFI_HAVE_CAPSULE_SUPPORT defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09Correct SPL use of CMD_STBOARDSimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_CMD_STBOARD defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31FWU: STM32MP1: Add support to read boot index from backup registerSughosh Ganu
The FWU Multi Bank Update feature allows the platform to boot the firmware images from one of the partitions(banks). The first stage bootloader(fsbl) passes the value of the boot index, i.e. the bank from which the firmware images were booted from to U-Boot. On the STM32MP157C-DK2 board, this value is passed through one of the SoC's backup register. Add a function to read the boot index value from the backup register. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-31stm32mp1: Add image information for capsule updatesSughosh Ganu
Enabling capsule update functionality on the platform requires populating information on the images that are to be updated using the functionality. Do so for the DK2 board. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-10-18stm32mp: fix compilation issue with DEBUG_UARTPatrick Delaunay
Fix the compilation issue when CONFIG_DEBUG_UART is activated drivers/serial/serial_stm32.o: in function `debug_uart_init': drivers/serial/serial_stm32.c:291: undefined reference to \ `board_debug_uart_init' The board_debug_uart_init is needed for SPL boot, called in cpu.c::mach_cpu_init(); it is defined in board/st/stm32mp1/spl.c. But with the removal #ifdefs patch, the function debug_uart_init() is always compiled even if not present in the final U-Boot image. This patch adds a file to provided this function when DEBUG_UART and SPL are activated. Fixes: c8b2eef52b6c ("stm32mp15: tidy up #ifdefs in cpu.c") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23board: st: stm32mp1: use of correct compatible string to add partitionsChristophe Kerello
Current compatible string used to update SPI NAND and SPI NOR devices can lead to a wrong partitions update (for example, SPI NAND partitions added to SPI NOR node in the device tree). To avoid this wrong behavior, use jedec,spi-nor compatible string for SPI NOR devices and spi-nand compatible string for SPI NAND devices. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-19Merge branch 'master' into nextTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-18cyclic: Use schedule() instead of WATCHDOG_RESET()Stefan Roese
Globally replace all occurances of WATCHDOG_RESET() with schedule(), which handles the HW_WATCHDOG functionality and the cyclic infrastructure. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
2022-09-06board: stm32mp1: remove test on CONFIG_DM_REGULATORPatrick Delaunay
The tests on CONFIG_DM_REGULATOR, added to avoid compilation issues, can now be removed, they are no more needed since the commit 16cc5ad0b439 ("power: regulator: add dummy helper"). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17board: stm32mp1: convert to livetreePatrick Delaunay
Replace gd->fdt_blob access with fdt_getprop() function to the function ofnode_get_property() to support a live tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17configs: add stm32mp13 defconfigPatrick Delaunay
Add a initial config for STM32M13x SOC family, using the stm32mp135f-dk device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17board: stm32pm1: add stm32mp13 board supportPatrick Delaunay
Add stm32mp15x prefix to all STM32MP15x board specific functions, this patch is a preliminary step for STM32MP13x support. This patch also adds the RCC probe to avoid circular access with usbphyc probe as clk provider. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: add support of STM32MP13xPatrick Delaunay
Introduce the code in mach-stm32mp and the configuration file stm32mp13_defconfig for the new STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17ARM: dts: stm32: add STM32MP13 SoCs supportPatrick Delaunay
Add initial support of STM32MP13 family based on v5.18-rc2 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10board: st: stm32mp1: Consider USB cable connected when boot device is USBPatrice Chotard
Always consider USB cable is connected when USB boot device is detected. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-04-28led: Drop led_default_state()Marek Vasut
This function is empty, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Steven Lawrance <steven.lawrance@softathome.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivatedPatrick Delaunay
Solve compilation issue on undefined CONFIG_SYS_MMC_ENV_DEV when CONFIG_ENV_IS_IN_MMC is deactivated on STMicroelectronics boards defconfig Fixes: 9f97193616f1 ("board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30board: stm32mp1: enable simple framebuffer node for splashscreenPatrick Delaunay
Enable an existing simple framebuffer node in the Linux kernel device tree and the add the associated reserved memory node to preserved the resources (clock, memory) used by the stm32 video driver to display the splashscreen = background in exlinux.conf file. These resources will be released by the Linux driver only when the associated driver is ready to avoid transition issues during the Linux kernel initialization between U-Boot splash screen and the final display. See Linux documentation for details: Documentation/devicetree/bindings/display/simple-framebuffer.yaml Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-08board: stm32mp1: Remove gpio_hog_probe_all() from boardPatrice Chotard
DM_GPIO_HOG flag has been replaced by GPIO_HOG flag since a while in commit 49b10cb49262 ("gpio: fixes for gpio-hog support"). And furthermore, gpio_hog_probe_all() is already called in board_r.c. So gpio_hog_probe() can be removed from stm32mp1.c. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-08board: stm32: Remove the bi_boot_params initializationPatrick Delaunay
The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-25treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...Simon Glass
The current API is outdated as it requires a devicetree pointer. Move these functions to use the ofnode API and update this globally. Add some tests while we are here. Correct the call in exynos_dsim_config_parse_dt() which is obviously wrong. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-16arm: stm32mp: add defconfig for trusted boot with FIPPatrick Delaunay
Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated. With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified. With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add config for STM32IMAGE supportPatrick Delaunay
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb) is located in FIP container with its device tree and with the secure monitor (provided by TF-A or OP-TEE). The FIP file is loaded by TF-A BL2 and each components is extracted at the final location. This patch add CONFIG_STM32MP15x_STM32IMAGE to request the STM32 image generation for SOC STM32MP15x when FIP container is not used (u-boot.stm32 is loaded by TF-A as done previously to keep the backward compatibility). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-27stm32mp1: add pull-up for gpio button PA13 and PA14Patrick Delaunay
When a push-button is released and PA13/PA14 are defined as input (high-Z) the LED should not be active as the circuit is open but a small current leak through PCB or push-button close the circuit and allows a small LED bias giving erroneous level voltage. So it is recommended to activate an internal pull-up in order to clearly fix the voltage at PA13/PA14 when button is released and to wait a short delay before to read the GPIO value only when the pull-up is correctly configured. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-16stm32mp: use device sequence number in boot_instance variablePatrick Delaunay
Use the device sequence number in boot_instance variable and no more the SDMMC instance provided by ROM code/TF-A. After this patch we don't need to define the mmc alias in device tree, for example: mmc0 = &sdmmc1; mmc1 = &sdmmc2; mmc2 = &sdmmc3; to have a correct mapping between the ROM code boot device = "${boot_device}${boot_instance}" and the MMC device in U-Boot. With this patch the 'mmc0' device (used in mmc commands) is always used when only one instance sdmmc is activated in device tree, even if it is only the sdmmc2 or sdmmc3. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18board: stm32mp1: correct the property name for ethPatrick Delaunay
Use the correct name for STMicroelectronics phys config properties, replace '_' by '-': "st,eth_clk_sel" => "st,eth-clk-sel" "st,eth-ref-clk-sel" => st,eth-clk-sel" These property name are aligned with the upstreamed Linux kernel binding: linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml See Linux kernel commit "dt-bindings: net: stmmac: add phys config properties" merged in v5.1-rc1. This patch allow to reuse the kernel device tree directly in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09stm32mp1: remove the board_check_usb_power function when ADC is not activatedPatrick Delaunay
Simplify the code of the function board_check_usb_power based in CONFIG_ADC and adc_measurement; the function is removed by the linker when the CONFIG_ADC is not activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-03-11board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when availablePatrick Delaunay
Check whether user has explicitly defined the mmc device to use in mmc_get_env_dev() with CONFIG_SYS_MMC_ENV_DEV. On STMicroelectronics boards the used mmc device for environment is the instance of boot device provided by the ROM code; the mmc instance is configured by alias in device tree. The used partition is defined in device tree with u-boot,mmc-env-partition = "ssbl". This patch allows to override this selection for the support of customer boards without alias; for example when SDMMC1 is not used and ENV in mmc0=SDMMC2, user can force the value: CONFIG_SYS_MMC_ENV_DEV = 0. On STMicroelectronics boards, the current behavior is kept with CONFIG_SYS_MMC_ENV_DEV = -1. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-02-28Correct U-Boot upstream repositoryHeinrich Schuchardt
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-13MAINTAINERS: Update STi and STM32 maintainers emails in remaining filesPatrice Chotard
A previous series already update STMicroelectronics emails maintainers but some files have been omitted (Makefile, .dts, .dtsi and .rst files). Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-13board: stm32pm1: update USB-C power detection algorithm on DK boardsPatrice Chotard
USB-C power supply which are Power Delivery compliant (USB-PD) are able to provide different voltage/current (for example 5V/3A 9V/3A 12V/2.25A...) In this case, the power supply need to negotiate the voltage/current to use with the device using CC1/CC2 USB-C signals. If this negotiation occurs during ADC measurement (done also on CC1/CC2 USB-C signals) some ADC acquisition can be corrupted which cause wrong power supply current detection. To avoid this, the power supply current detection algorithm is updated as following: - perform an ADC measurement, if a 3A current is detected, continue the boot process. - else, wait 20ms (max tPDDebounce duration) to ensure that USB-PD negotiation is done and perform another ADC measurement. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2021-01-13board: st: stm32mp1: migrate trace to dev and log macroPatrick Delaunay
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-09add check for ignored CONFIG_ENV_EXT4_DEVICE_AND_PART definitionManuel Reis
Check whether user has explicitly defined device and partition where environment file will be located before using 'auto' i.e. bootable partition Voids the need to set such partition as bootable to work with the 'dev:auto' tuple Signed-off-by: Manuel Reis <mluis.reis@gmail.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-11-25board: st: stm32mp1: update load address for FIT examplesPatrick Delaunay
Update kernel load address for FIT examples to avoid relocation: - Kernel example uses Image.gz with U-Boot gzip decompression at final kernel location 0x0xC0008000. - Copro example loads zImage at a correct location (0xC4000000), to avoid zImage relocation before decompression by kernel code. An other solution to avoid zImage relocation is to align the kernel load and entry address with the real location in FIT (the relocation of zImage is skipped in U-Boot bootm command for identical address) but it is less flexible because this offset depends on FIT content: For example: ## Loading kernel from FIT Image at c2000000 ... Using 'ev1' configuration Trying 'kernel' kernel subimage Description: Linux kernel Created: 2020-10-22 9:08:32 UTC Type: Kernel Image Compression: uncompressed Data Start: 0xc20000cc The kernel offset in FIT is 0xCC in FIT and zImage is decompressed at 0xC0008000 by kernel code: kernel { description = "Linux kernel"; data = /incbin/("zImage"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0xC20000cc>; entry = <0xC20000cc>; hash-1 { algo = "sha1"; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25board: stm32mp1: no MTD partitions fixup for serial bootPatrick Delaunay
Remove the update of the MTD partitions in kernel device tree for serial boot (USB / UART), and the kernel will use the MTD partitions define in the loaded DTB because U-Boot can't known the expected flash layout in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-06dm: add cells_count parameter in *_count_phandle_with_argsPatrick Delaunay
The cell_count argument is required when cells_name is NULL. This patch adds this parameter in live tree API - of_count_phandle_with_args - ofnode_count_phandle_with_args - dev_count_phandle_with_args This parameter solves issue when these API is used to count the number of element of a cell without cell name. This parameter allow to force the size cell. For example: count = dev_count_phandle_with_args(dev, "array", NULL, 3); Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-13board: stm32mp1: use const for struct node_infoPatrick Delaunay
Use const for the variable nodes in ft_board_setup, this patch follow fdt_fixup_mtdparts prototype and no more use stack. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: remove board.cPatrick Delaunay
Remove the file board/st/stm32mp1/board.c which is not more compiled since commit 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Fixes: 4fb46816c7e2 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: update fdt fixup partitions tableChristophe Kerello
This patch adds "st,stm32mp1-fmc2-nfc" compatible string in the fdt fixup partitions table. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 17:03:24 +0000