aboutsummaryrefslogtreecommitdiff
path: root/board/toradex
AgeCommit message (Collapse)Author
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-16board: apalis-tk1: launch toradex easy installer in usb recoveryMarcel Ziswiler
The USB recovery mode is used by Toradex to load the Toradex Easy Installer image which supports further system images installation. Prepare for loading and launching the Toradex Easy Installer if the USB Recovery mode is activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-08-09board: colibri_vf: fix compiling warningOleksandr Suvorov
This patch fixes the following compiler warning: ============= board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup': board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable] ============= Fixes: be3f1a56bf8 ("video: fsl_dcu_fb: add DM_VIDEO support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx6: add board_fit_config_name_match to support FIT in SPLMing Liu
Only one dtb is currently supported, so match with imx6-colibri. Signed-off-by: Ming Liu <ming.liu@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: toradex: make USB PID from config block optionalStefan Agner
If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-09board: colibri_imx7: use SDP if USB serial downloader has been usedStefan Agner
In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-20toradex: configblock: fix module revision in config blockDenys Drozdov
U-boot might display wrong module revision information for modules with an assembly version 'K'. "cfgblock create" does not takes into account all revision digits from PID8. This fix takes into account all digits of PID8 to store module revision. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass
In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()Simon Glass
The current macro is a misnomer since it does not declare a device directly. Instead, it declares driver_info record which U-Boot uses at runtime to create a device. The distinction seems somewhat minor most of the time, but is becomes quite confusing when we actually want to declare a device, with of-platdata. We are left trying to distinguish between a device which isn't actually device, and a device that is (perhaps an 'instance'?) It seems better to rename this macro to describe what it actually is. The macros is not widely used, since boards should use devicetree to declare devices. Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is declaring a new driver_info record, not a device. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-26toradex: hand over maintainershipIgor Opaniuk
Hand over maintainership of Toradex SoMs (that I was responsible of) to Oleksandr because of my resignation from Toradex, as such I will have no immediate involvement with these modules and as a result not able to continue maintaining these boards. CC: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-12-06colibri-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: automatic ram size detectionMarcel Ziswiler
Implement board_phys_sdram_size() to automatically detect Verdin iMX8M Mini DualLite 1GB vs. Verdin iMX8M Mini Quad 2GB. Note: This only works if we keep using similar RAM chips! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: fix i.mx 8m mini interactiveMarcel Ziswiler
Now with them first Verdin iMX8M Mini DualLite modules in for bring-up we got clarity how is_cpu_type() actually behaves. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: spl: enable pca9450 i2c level translatorMax Krummenacher
Enable PCA9450 i2c level translator, as this is used for the on module ADC. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: implement hardware version detectionMax Krummenacher
And select the correct devicetree accordingly by setting the variant environment variable. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06verdin-imx8mm: spl: switch to pca9450 pmicMax Krummenacher
V1.1A HW switched the PMIC from BD71837 to PCA9450. - Disable combined DVS in PCA9450_BUCK123_DVS. - Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM. - Configure WDOG_B behaviour. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skusMarcel Ziswiler
Add new i.MX 8M Mini/Plus SKUs to ConfigBlock handling: 0058: Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT 0059: Verdin iMX8M Mini Quad 2GB IT 0060: Verdin iMX8M Mini DualLite 1GB WB IT 0061: Verdin iMX8M Plus Quad 2GB Rename existing SKU (use correct one): Verdin iMX8M Nano SoloLite 1GB -> Verdin iMX8M Nano Quad 1GB Wi-Fi Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-04colibri_t30: disable rs232 serial transceiver forceoff pinsMarcel Ziswiler
Use gpio_early_init_uart() function to disable RS232 serial transceiver ForceOFF# pins on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: avoid uart input from floating pinsMarcel Ziswiler
Avoid UART input from floating RX pins on UARTB and UARTC (Colibri T30) and UARTB, UARTC and UARTD (Apalis T30). Note: Floating pins may cause spurious break conditions potentially interrupting U-Boot's autoboot. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04colibri_t30: fix spi1 and uart2/3 resp. uartb/c pinmuxingMarcel Ziswiler
Fix SPI1 and UART2/3 resp. UARTB/C pinmuxing. Note: The former was illegally muxing multiple SoC balls onto the same internal SoC signal which caused rather strange behaviour regarding the RS232 serial transceiver ForceOFF# pins as available on Iris. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: add comment about tristate and input vs. output pinmuxingMarcel Ziswiler
Add pinmuxing comment stating that TRISTATE means the output driver is tri-stated and INPUT means the input driver is enabled vs. OUTPUT where it is disabled. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: wrap video specific funcs with ifdefsIgor Opaniuk
Wrap video specific functionality with ifdefs. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk
Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 391c712dde("colibri-imx6ull: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27colibri-imx7: fix splash logo drawingIgor Opaniuk
1. Configure white on black for video console. 2. Enable printing bmp logo during late board init stage. 3. Use iomux configuration from device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27colibri-imx6ull: show boot logoIgor Opaniuk
1. Show boot logo embed in U-Boot blob. 2. Drop iomux configration for LCD, and use the one provided in device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27ARM: dts: imx7-colibri: multiple node updatesIgor Opaniuk
1. Move u-boot specific nodes to u-boot dts include: legacy lcdif node and aliases. 2. Add iomux configuration for LCD. 3. Drop un-needed u-boot,dm-pre-reloc for alias node. 4. Fix display-timings, use the one from Toradex downstream kernel [1] [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n206 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: common: show boot logoIgor Opaniuk
Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27verdin-imx8mm: add EEPROM support for carrier boardIgor Opaniuk
Enable these Kconfig symbols: TDX_CFG_BLOCK_EXTRA=y TDX_HAVE_EEPROM_EXTRA=y Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: tdx-cfg-block: add carrier board info printingIgor Opaniuk
Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: tdx-cfg-clock: add migration routine from PID8Igor Opaniuk
Add migration routine from PID8 pre-stored values on EEPROM (including sane value checks). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: tdx-cfg-block: add support for EEPROMIgor Opaniuk
This introduces support for EEPROM as a storage for the main Toradex config block and additional config blocks on extra EEPROM chips (on carrier board or video adapters). To enable EEPROM as a storage for the main config block: TDX_HAVE_EEPROM=y. For additional EEPROMs please enable this Kconfig symbol: TDX_CFG_BLOCK_EXTRA=y. Information about existing EEPROM chips is provided via Device Tree using aliases. You can also write configuration for the carrier board using create_carrier subcommand for cfgblock. Example: Verdin iMX8MM # cfgblock create_carrier Supported carrier boards: UNKNOWN CARRIER = [0] Verdin Carrier Board = [1] Choose your carrier board (provide ID): 1 Enter carrier board version (e.g. V1.1B): V1.0A Enter carrier board serial number: 10622780 Also with barcode: Verdin iMX8MM # cfgblock create carrier -y 0156100010622780 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: tdx-cfg-block: add carrier boards and display adaptersIgor Opaniuk
Add defines for supported carrier boards and display adapters. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27toradex: tdx-cfg-block: add EEPROM read/store wrappersIgor Opaniuk
These functions wrap functionality for storing config blocks in EEPROM. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 01:52:55 +0000