aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2018-11-20sandbox: README: use setenv ethrotate noHeinrich Schuchardt
If we want to control which network interface is actually used, we have to issue 'setenv ethrotate no'. If ethrotate is not set any interface may be used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20sandbox: README: setting environment variablesHeinrich Schuchardt
The command to set environment variables is setenv. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20Merge git://git.denx.de/u-boot-marvellTom Rini
- Clearfog GT-8K support added by Baruch / Raheeb - const and sizes cleanup (also in MIPS) from Baruch - Minor cleanup to db-88f6820 from Chris
2018-11-18mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get addressStefan Roese
Use the correct function to get the uncached address to access the SoC registers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def stateStefan Roese
This is needed to set the LEDs automatically to a default state, as configured in the dts. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog)Stefan Roese
Configure digital vs analog GPIOs as needed on this board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-16sunxi: Update MAINTAINERS file for recent boardsTom Rini
Add entries for the pine64-lts and pinebook configs. Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16board: ti: am65x: Update README to add R5 build supportLokesh Vutla
Update the README file to add r5 build support and system firmware support. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16configs: am65x_evm_r5: Add initial supportLokesh Vutla
Add initial defconfig support for AM65x that runs on R5. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-11-16board: ti: am654: r5: Add initial support for am654Lokesh Vutla
Add initial support for AM654 based EVM running on R5. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16bcm968580xref: add initial supportPhilippe Reynes
This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-11-16Merge tag 'pull-14nov18' of git://git.denx.de/u-boot-dmTom Rini
- virtio implementation and supporting patches - DM_FLAG_PRE_RELOC fixes - regmap improvements - minor buildman and sandbox things
2018-11-14Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-11-14x86: qemu: Imply virtio PCI transport and device driversBin Meng
Add virtio drivers for QEMU x86 targets. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14arm: qemu: Enumerate virtio bus during early bootBin Meng
Currently devices on the virtio bus is not automatically enumerated, which means peripherals on the virtio bus are not discovered by their drivers. This uses board_init() to do the virtio enumeration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14arm: qemu: Add a Kconfig in the board directoryBin Meng
This adds a Kconfig file in the board directory, so that some board-specific options can be specified there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14riscv: qemu: Include some useful commandsBin Meng
With the virtio net and blk drivers, we can do more stuff with some useful commands. Imply those in the board Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14riscv: qemu: Enumerate virtio bus during early bootBin Meng
Currently devices on the virtio bus is not automatically enumerated, which means peripherals on the virtio bus are not discovered by their drivers. This uses board_init() to do the virtio enumeration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14Merge branch 'next'Tom Rini
This brings in the u-boot-net PR from Joe.
2018-11-13board: allwinner: sun50i-h6: Add Orangepi Lite2 supportJagan Teki
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13sun50i: A64: add support for R_I2C controllerVasily Khoruzhick
Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has two groups of pinmuxes on PL bank, so it's called R_I2C. Add support for this I2C controller and the pinmux which doesn't conflict with RSB. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Acked-by: Jagan Teki <jagan@openedev.com>
2018-11-09MAINTAINERS: Update stm32mp entryPatrick Delaunay
Add mailing list for stm32mp architecture and board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-06mx8mq_evk: README: Delete file introduced by mistakeFabio Estevam
board/freescale/mx8mq_evk/README has been introduced by mistake in commit d0dd73974c61 ("imx: add i.MX8QXP MEK board support") Remove it for now as this should be introduced when mx8mq_evk support is in place. Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-11-05drivers: net: keystone_net: drop non dm codeGrygorii Strashko
Networking support for all TI K2 boards converted to use DM model and CONFIG_DM_ETH enabled in all corresponding defconfig files, hence drop unused non DM K2 networking code. Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-01iot_dk: Add READMEAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-11-01emdk->emsdp: Rename boardAlexey Brodkin
Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-31sunxi: add support for Banana Pi M2 Zero boardJun Nie
Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-10-29Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-10-29sunxi: store DRAM size in SPL headerAndre Przywara
At the moment we rely on the infamous get_ram_size() function to learn the actual DRAM size in U-Boot proper. This function has two issues: 1) It only works if the DRAM size is a power of two. We start to see boards which have 3GB of (usable) DRAM, so this does not fit anymore. 2) As U-Boot has no notion of reserved memory so far, it will happily ride through the DRAM, possibly stepping on secure-only memory. This could be a region of DRAM reserved for OP-TEE or some other secure payload, for instance. It will most likely crash in that case. As the SPL DRAM init routine has very accurate knowledge of the actual DRAM size, lets propagate this wisdom to U-Boot proper. We re-purpose a currently reserved word in our SPL header for that. The SPL itself stores the detected DRAM size there, and bumps the SPL header version number in that case. U-Boot proper checks for a valid SPL header and a high enough version number, then uses the DRAM size from there. If the SPL header field is not sufficient, we fall back to the old DRAM scanning routine. Part of the DRAM might be present and probed by SPL, but not accessible by the CPU. They're restricted in the main U-Boot binary, when accessing the DRAM size from SPL header. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-29sunxi: board.c: refactor SPL header checksAndre Przywara
So far we have two users which want to look at the SPL header. We will get more in the future. Refactor the existing SPL header checks into a common function, to simplify reusing the code. Now that this is easy, add proper version checks to the DT name parsing. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-10-29sunxi: Extend SPL header versioningAndre Przywara
On Allwinner SoCs we use some free bytes at the beginning of the SPL image to store various information. We have a version byte to allow updates, but changing this always requires all tools to be updated as well. Introduce the concept of semantic versioning [1] to the SPL header: The major part of the version number only changes on incompatible updates, a minor number bump indicates backward compatibility. This patch just documents the major/minor split, adds some comments to the header file and uses the versioning information for the existing users. [1] https://semver.org Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-10-29sunxi: disable Pine A64 model detection code on other boardsIcenowy Zheng
The Pine A64 Plus/non-Plus model detection code is now built on all 64-bit ARM SoCs, even if the code cannot be triggered when H5/H6 is in use. Disable them when the board is Pine A64 by adding a Kconfig option that is only selected on Pine A64. On GCC 7.3.1 this makes the size of the function reduces 184 bytes, and saves a 104 byte strstr() function, then makes SPL on H6 succeed to build. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-25Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imxTom Rini
Merged imx8 architecture, fix build for imx8 + warnings
2018-10-24sunxi: docs: Mention CONFIG_NAND requirementPriit Laes
Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-24sunxi: Fix typos of spelling AllwinnerPriit Laes
Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-24warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfigFabio Estevam
Add an entry for the warp7_bl33_defconfig target. This fixes the following warnings: WARNING: no status info for 'warp7_bl33' WARNING: no maintainers for 'warp7_bl33' Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2018-10-23ARM: Samsung: Add Exynos5422-based Odroid HC2 supportDirk Meul
Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2. Resend because MUA changed whitespace. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-10-22ARM: omap3_logic: Add NOR Flash Support for SOM-LVAdam Ford
The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR flash part connected to CS2 in addition to the NAND part on CS0. This patch setups the GPMC timings for the MT28 NOR Flash and enables the CFI-Flash driver now that the CFI stuff is in Kconfig Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22board: at91sam9x5: add environment var for cpu typeEugen Hristev
When booting and CPU is detected from cpuid, we also need an environment variable that will be used in boot commands to load the proper devicetree. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22ARM: omap3logic: Fix MMC nameAdam Ford
In my haste to migrate SPL to DM, I copied the wrong name. While it really doesn't matter, I'd prefer the name to match the board, so am335x_mmc0 is now called omap3_logic_mmc0 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Specify DM serial driver as omap_serialAdam Ford
With the new omap_serial driver, this patch uses this instead from the former ns16550_serial driver. Even though the omap_serial driver is essentially the same. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Encapsulate the MUSB functions in check for DMAdam Ford
With the DM_USB working for USB host features, encapsulate the USB gadget initialization in a precomiler check. If DM is enabled, we don't need to manually initialize the MUSB driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37Adam Ford
The default timings are assumming an OMAP36 / AM37 / DM37, but the OMAP35 controller is a bit slower, so DDR may operate out of spec when under stress. This patch checks the processor type and sets the DDR timings according to processor type. Fixes: 5ad4212ce0d5 ("ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22board: ge: bx50v3: fix initialization of i2c bus0Dan Cimpoca
I2C bus 0 was not initialized correctly. There is an offset between i2c index and the structure number of pad info. So i2c bus 0 can be in an inconsistent state. This problem become visible on B{4,6}50v3 with the CPUC HW watchdog enabled. Sometimes when the CPUC HW watchdog interrupted the boot process, U-Boot was not able to read VPD from I2C/EEPROM and the system failed to boot up again, because a device connected to that bus was stuck in data transfer state (from previous boot attempt) and there was no method to recover (struct mxc_i2c_bus::idle_bus_fn was not set) courtesy of incorrect initialization. Signed-off-by: Dan Cimpoca <dan.I.cimpoca@ge.com> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22board: ge: bx50v3: b{4,6}50v3 modelineIan Ray
The b{4,6}50v3 kernel framebuffer console requires a modeline otherwise the LVDS panel shows garbage. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22board: ge: bx50v3: correct LDB clockIan Ray
Use Video PLL to provide 65MHz for all displays. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22board: ge: bx50v3: Change maintainerFabien Lahoudere
While using ./scripts/get_maintainer.pl I detect that the Maintainer name and address for bx50v3 boards are not valid. The new maintainer for GE bx50v3 products must be Ian Ray. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22imx: imx8qxp_mek: update to build image in U-BootPeng Fan
Update README Add imximage.cfg Update defconfig to include imximage.cfg Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx: add i.MX8QXP MEK board supportPeng Fan
Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 01:50:29 +0000