aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-12-07doc: board: imx8qm-rom7720-a1.rst: convert readme to reSTOliver Graute
Convert README to reStructuredText format. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-06colibri-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: automatic ram size detectionMarcel Ziswiler
Implement board_phys_sdram_size() to automatically detect Verdin iMX8M Mini DualLite 1GB vs. Verdin iMX8M Mini Quad 2GB. Note: This only works if we keep using similar RAM chips! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: fix i.mx 8m mini interactiveMarcel Ziswiler
Now with them first Verdin iMX8M Mini DualLite modules in for bring-up we got clarity how is_cpu_type() actually behaves. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: spl: enable pca9450 i2c level translatorMax Krummenacher
Enable PCA9450 i2c level translator, as this is used for the on module ADC. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: implement hardware version detectionMax Krummenacher
And select the correct devicetree accordingly by setting the variant environment variable. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06verdin-imx8mm: spl: switch to pca9450 pmicMax Krummenacher
V1.1A HW switched the PMIC from BD71837 to PCA9450. - Disable combined DVS in PCA9450_BUCK123_DVS. - Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM. - Configure WDOG_B behaviour. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skusMarcel Ziswiler
Add new i.MX 8M Mini/Plus SKUs to ConfigBlock handling: 0058: Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT 0059: Verdin iMX8M Mini Quad 2GB IT 0060: Verdin iMX8M Mini DualLite 1GB WB IT 0061: Verdin iMX8M Plus Quad 2GB Rename existing SKU (use correct one): Verdin iMX8M Nano SoloLite 1GB -> Verdin iMX8M Nano Quad 1GB Wi-Fi Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-12-06imx: imx8qm_rom7720_a1: add missing DTS to the MAINTAINERSOliver Graute
add the dts file to the MAINTAINERS entry Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2020-12-06board: ge: bx50v3: check b850v3 power management watchdogIan Ray
Set `bootcause' from b850v3 power management watchdog status. Boot cause "REVERT" is no longer used, remove it. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: bx50v3: reduce magic numbersSebastian Reichel
Use VPD product ID instead of confidx, so that we can easily reuse the product ID defines and avoid some magic numbers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: bx50v3: drop unused pinmux definesSebastian Reichel
Remove pinmux defines, that are no longer used after converting the code to devicetree. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: common: vpd: fix nameSebastian Reichel
Commit f692b479f02d changed the VPD partition name from "vpd" to "vpd@0". Fix the VPD reader code to use the new name, so that the VPD code keeps working. Fixes: f692b479f02d ("i2c: eeprom: Use reg property instead of offset and size") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06imx: aristainetos: enable U-Boot Environment variables protectionHeiko Schocher
enable Environment protection with: CONFIG_ENV_APPEND=y CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE and add board specific env_get_location() function. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: add support for aristainetos2c_cslb board variantHeiko Schocher
add support for aristainetos2c_cslb board variant. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: remove not longer supported aristainetos boardsHeiko Schocher
Removed aristainetos2, 2b, 2b-csl. This boards have been recalled and destroyed. Adapt board code to remove stuff not needed anymore. Fix checkpatch warning, remove fdt_high and initrd_high from default environment. Signed-off-by: Heiko Schocher <hs@denx.de> zu remove
2020-11-28riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controllerPragnesh Patel
Enable support for SiFive FU540 Opencores I2C master controller. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-25board: st: stm32mp1: update load address for FIT examplesPatrick Delaunay
Update kernel load address for FIT examples to avoid relocation: - Kernel example uses Image.gz with U-Boot gzip decompression at final kernel location 0x0xC0008000. - Copro example loads zImage at a correct location (0xC4000000), to avoid zImage relocation before decompression by kernel code. An other solution to avoid zImage relocation is to align the kernel load and entry address with the real location in FIT (the relocation of zImage is skipped in U-Boot bootm command for identical address) but it is less flexible because this offset depends on FIT content: For example: ## Loading kernel from FIT Image at c2000000 ... Using 'ev1' configuration Trying 'kernel' kernel subimage Description: Linux kernel Created: 2020-10-22 9:08:32 UTC Type: Kernel Image Compression: uncompressed Data Start: 0xc20000cc The kernel offset in FIT is 0xCC in FIT and zImage is decompressed at 0xC0008000 by kernel code: kernel { description = "Linux kernel"; data = /incbin/("zImage"); type = "kernel"; arch = "arm"; os = "linux"; compression = "none"; load = <0xC20000cc>; entry = <0xC20000cc>; hash-1 { algo = "sha1"; }; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25board: stm32mp1: no MTD partitions fixup for serial bootPatrick Delaunay
Remove the update of the MTD partitions in kernel device tree for serial boot (USB / UART), and the kernel will use the MTD partitions define in the loaded DTB because U-Boot can't known the expected flash layout in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25ARM: dts: stm32: Add DHCOM based PicoITX boardMarek Vasut
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-20fru: common: Record pcie/uuid fields in custom board areaMichal Simek
Add additional fields. They will be just recorded and filled but not shown. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: ops: Do not let parser to write data to not allocated spaceMichal Simek
If customs fields in board area are used it will likely go over allocated space in struct fru_board_data. That's why calculate limit of this structure to make sure that different data is not rewritten by accident. When limit is reached stop to record fields. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: common: Switch capture variable with the restMichal Simek
capture variable is bool which is just one byte and it is just causing unaligned accesses. Better to have it as last entry in the structure. It also simplify offset calculation for initial header copy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19arm: vexpress: don't reset flags in board_init to avoid losing previous onesArnaud Aujon Chevallier
Re-submitted because of missing description and signed-off. flags reset in board_init caused bugs when executing command like editenv because the reallocated flag was lost. Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Signed-off-by: Arnaud Aujon Chevallier <arnaud@intelibre.fr>
2020-11-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Enable SATA disk on QEMU RISC-V and update doc. - k210 pinctrl updates: - Fix inverted IE and OE for I2C. - Rename power domains to match datasheet.
2020-11-17riscv: enable SATA disk on QEMU RISC-VHeinrich Schuchardt
Allow attaching a virtual SATA disk to QEMU RISC-V by implying AHCI, AHCI_PCI, CMD_SCSI, DM_SCSI, PCI_INIT_R, SCSI, SCSI_AHCI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17riscv: sort SPECIFIC_OPTIONSHeinrich Schuchardt
Sort implied options in BOARD_SPECIFIC_OPTIONS in the same sequence as in .config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17sunxi: allow to use AXP20[39] attached to I2C0 on V3 seriesIcenowy Zheng
The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: a64: Add a defconfig for the PinePhoneSamuel Holland
The PinePhone is a smartphone produced by Pine64, with an A64 SoC, 2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel, and Quectel EG25-G modem. There are two main board revisions: 1.1 for early adopters, and 1.2 for mass production. Since there is code to detect the board revision at boot, one config/image can support both boards. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Set fdtfile to match the DT chosen by SPLSamuel Holland
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE. This meant that, regardless of the DT chosen by SPL (either by changing the header in the image or by the selection code at runtime), Linux always used the default DT. By using the name from the SPL header (which, because of the previous commit, always matches the DT used by U-Boot proper), Linux also sees the same board as U-Boot/SPL, even if the boot script later loads a DT from disk. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: remove no longer needed CONFIG_SPL_LOAD_FIT guards] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Save the chosen DT name in the SPL headerSamuel Holland
This overwrites the name loaded from the SPL image. It will be different if there was previously no name provided, or if a more accurate name was determined by the board variant selection logic. This means that the DT name in the SPL header now always matches the DT appended to U-Boot. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: move function under CONFIG_SPL_LOAD_FIT guard] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Add PinePhone DT selection logicSamuel Holland
There are two different publicly-released revisions of the PinePhone hardware, versions 1.1 and 1.2; and they need different device trees. Since some GPIO pins were rerouted, we can use that to distinguish between them. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: board: Simplify Pine A64 DT selection logicSamuel Holland
Instead of using an entirely separate matching algorithm, simply update the name of the DT we want to match. Enabling this logic does not depend on the FIT config name, only on the initial guess of the board name. Importantly, the initial guess must be "sun50i-a64-pine64-plus", because otherwise the logic would trigger when "sun50i-a64-pine64-lts" was written to the SPL header. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17sunxi: board: Add a helper to get the SPL DT nameSamuel Holland
This moves the validity checking and typecasts all to one place away from the string comparison logic, and it detangles the compile-time and runtime control flow. The new helper will also be used by U-Boot proper in a future commit. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: protect new function with CONFIG_SPL_LOAD_FIT] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17sunxi: board: Use a more descriptive variable nameSamuel Holland
The variable "cmp_str" always leaves me wondering if it is the DT name of the current board (yes) or DT name in the FIT config entry (no). In preparation for expanding the functionality here, rename it to something that obviously means "this is the DT name we are looking for". Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-16Merge tag 'ti-v2021.01-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix Nokia RX-51 boot issues - Fix CONFIG_LOGLEVEL on K3 devices - Add phyBOARD REGOR support
2020-11-15Nokia RX-51: Make onenand workingIvaylo Dimitrov
set_gpmc_cs0() sets wrong timings and size for Nokia N900 onenand flash. Fix that by setting the correct timings and size from the board code Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Pali Rohár <pali@kernel.org>
2020-11-15Nokia RX-51: During init disable lp5523 led instead of resetting itPali Rohár
After commit d5243359e1af ("OMAP24xx I2C: Add support for set-speed") U-Boot is unstable to reset lp5523 led. That commit added pooling for i2c poll ARDY bit which apparently is never set. It is not known what is happening here. Purpose of resetting lp5523 led in Nokia RX-51 code is just to turn off very bright led which is powered on by NOLO and expects next boot image (kernel or U-Boot) to turn it off. After testing we observed that just disabling lp5523 led is working fine. So as a workaround to this ARDY bit i2c issue we disable lp5523 led instead of resetting it. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock()Pali Rohár
After commit 04a2ea248f58 ("mmc: disable UHS modes if Vcc cannot be switched on and off") U-Boot started crashing on Nokia RX-51 while initializing mmc and caused reboot loop. It looks like that some clocks were not enabled and this patch fixes U-Boot mmc crash. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15Nokia RX-51: Convert to CONFIG_DM_I2CPali Rohár
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove CONFIG_SYS_I2C. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15ARM: am335x: Add phyBOARD REGOR supportParthiban Nallathambi
phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060). CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-REGOR DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit c4d6fe731176 ("Linux 5.9.0") Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-13rockchip: gru: Allow setting up clocks in U-Boot properAlper Nebi Yasak
Commit fe974716326c ("rockchip: rk3288: Allow setting up clocks in U-Boot proper") fixes some clock issues when chainloading U-Boot on rk3288 chromebooks. Part of that change is still available in veyron's board_early_init_r() function. Since chain-loading U-Boot proper from vendor firmware is possible on gru boards as well, do the same thing for them too. On rk3399, this needs to detect whether SPL was run via handoff, so enable that and bloblist kconfigs it needs for chromebook_bob. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-10x86: coral: Correct max98357 fileSimon Glass
This somehow ended up as an empty file. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add a new SMBIOS parser and enable it when booting from coreboot - Fix up various driver names to avoid dtoc warnings - Fully enable ACPI support on Google Chromebook Coral - Add a way to set SMBIOS properties using the devicetree - Update existing boards to use devicetree for SMBIOS using a new default sysinfo driver
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:03:27 +0000