aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2018-08-10db410c: Fixup DRAMRamon Fried
Call the MSM DRAM detection and fixup function to support dynamic detection of onboard memory. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-10sandbox: led: use new function to configure default statePatrick Delaunay
Initialize the led with the default state defined in device tree in board_init and solve issue with test for led default state. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-10stm32mp1: use new function led default statePatrick Delaunay
Initialize the led with the default state defined in device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-09bcm968380gerg: Add MAINTAINERS fileTom Rini
Add an initial MAINTAINERS file based on author of the code. Cc: Philippe Reynes <philippe.reynes@softathome.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-08Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2018-08-08bcm968380gerg: add initial supportPhilippe Reynes
This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: au1x00: Remove support for these SoCsTom Rini
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an apparent clone of the dbau1x00 platform. As pb1x00 had no listed maintainer I am assuming that it is also orphaned. Remove this platform and then remove the unused SoC support. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: dbau1x00: Remove this boardTom Rini
This platform has been marked as orphan since June of 2016 and should have been removed some time ago. Do so now. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-07Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-08-07zynqmp: Add avnet_ultra96_rev1_defconfig to the lits of boardsTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-07Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.09-rc2 xilinx: - Add support for zybo z7 and ultra96 - Tune zynq and zynqmp mini configurations - Move SYS_MALLOC_LEN to Kconfig fdt - make static funcs gpio: - Fix soft gpio driver - Fix Zynq gpio driver by using platdata microblaze: - Fix Kconfig entry spi - Move ISSI to Kconfig
2018-08-07ARM: kirkwood: add SBx81LIFXCAT boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: select boot device at SoC levelBaruch Siach
Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: consolidate SPL boot device config symbolsBaruch Siach
Use MVEBU_SPL_BOOT_DEVICE_* to select between SPI and MMC, instead of board specific symbols. This commit enables the boot device selection menu to all mvebu platforms, but it is only effective on Turris Omnia and gdsys Controlcenter DC platforms. A following commit will enable boot selection for other platforms. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: a38x: drop duplicate platform id symbolsBaruch Siach
Use generic mvebu Kconfig symbols like all other mvebu boards. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: turris_omnia: use u-boot-spl-dtb.binBaruch Siach
u-boot-spl.bin and u-boot-spl-dtb.bin are identical when building the turris_omnia_defconfig. This commit makes Turris Omnia consistent with all other mvebu boards. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: add support for the zybo z7 boardLuis Araneda
The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06microblaze: Add missing quotes around XILINX_MICROBLAZE0_HW_VERMichal Simek
This issue is reported by kconfiglib: warning: style: quotes recommended around default value for string symbol XILINX_MICROBLAZE0_HW_VER (defined at board/xilinx/microblaze-generic/Kconfig:37) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06ARM: Odroid XU3: MAINTAINERS: Add a co-maintainer for OdroidXU3Lukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0Lukasz Majewski
This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of hardcoded value 0. This is necessary to allow booting this board from the SD card. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-08-03Add Beaglebone Enhanced supportKoen Kooi
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black, but with the following differences: * Gigabit capable PHY * Extra USB hub, optional i2c control * lps3331ap barometer connected over i2c * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c * 1GiB DDR3 RAM * RTL8723 Wifi/Bluetooth connected over USB Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-01Merge tag 'arc-updates-for-2018.09-rc2' of git://git.denx.de/u-boot-arcTom Rini
That's a set of prety minor changes and fixes for ARC. Among them: * Improvement in CREG GPIO driver used on ARC dev boards that allow us to re-use the driver for SPI's chip select * Enable SPI-flsh on AXS10x boards which allows to update U-Boot binary that gets loaded by boot-ROM * Fix accommodating always utilized unaligned access by GCC for ARC starting from 8.1.0
2018-07-31openrd: Mark as OrphanedTom Rini
After talking with Albert, mark these boards as orphaned as he no longer has one. Cc: Albert ARIBAUD <albert-u-boot@aribaud.net> Cc: Vagrant Cascadian <vagrant@debian.org> Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31ls1046ardb: Add qspi_spl variant to the MAINTAINERS fileTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31pico-pi: Add Otavio as maintainerTom Rini
Update the MAINTAINERS file to list Otavio Salvador as the maintainer for this board. Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: add MMC support for H6Icenowy Zheng
The Allwinner H6 SoC has 3 MMC controllers like the ones in A64, with the MMC2 come with the capability to do crypto by EMCE. Add MMC support for H6. EMCE support is not added yet. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: change ATF position for H6Icenowy Zheng
H6 has different SRAM A2 address, so the ATF load address is also different. Add judgment code to sunxi 64-bit FIT generation script. It will judge the SoC by the device tree's name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31HSDK: Fixes and improvements in READMEAlexey Brodkin
1. Explained prerequisites for "make bsp-generate" command. 2. Cleaned-up duplicates Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31ARC: AXS10x/HSDK: Use our own version of mkimageAlexey Brodkin
Since U-Boot tools are being built anyways it's much nicer to use them instead of relying on some of them bein installed on build host (which might easily not be the case). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31ARC: AXS10x: add tool and make target to generate bspEugeniy Paltsev
AXS10x boards have preloader that reads SPI flash pages and searches special image header to fetch and load binary. Add tool, make target (bsp-generate) to generate update script and u-boot binary image with header for preloader. Also add script to default environment to apply updates. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-30Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-07-25 Highlights this time: - Many small fixes to improve spec compatibility (found by SCT) - Almost enough to run with sandbox target - GetTime() improvements - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-26armv8: ls1046ardb: Add falcon mode for for QSPI bootYork Sun
A new defconfig is introduced to support SPL boot from QSPI NOR flash. This is to support falcon mode for faster booting into Linux. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2080ardb: update copyright claimAlison Wang
This patch updates the copyright claim for the issues reported by legal review. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-25efi_loader: Rename sections to allow for implicit dataAlexander Graf
Some times gcc may generate data that is then used within code that may be part of an efi runtime section. That data could be jump tables, constants or strings. In order to make sure we catch these, we need to ensure that gcc emits them into a section that we can relocate together with all the other efi runtime bits. This only works if the -ffunction-sections and -fdata-sections flags are passed and the efi runtime functions are in a section that starts with ".text". Up to now we had all efi runtime bits in sections that did not interfere with the normal section naming scheme, but this forces us to do so. Hence we need to move the efi_loader text/data/rodata sections before the global *(.text*) catch-all section. With this patch in place, we should hopefully have an easier time to extend the efi runtime functionality in the future. Signed-off-by: Alexander Graf <agraf@suse.de> [agraf: Fix x86_64 breakage]
2018-07-24Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-07-25board: constify struct node_info arrayMasahiro Yamada
Add 'const' (also 'static' in some places) to struct node_info arrays to save memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-24ARM: AM3517-EVM: Update MaintainerAdam Ford
The previous e-mail pointing to Vaibhav Hiremath <hvaibhav@ti.com> is bouncing and has for some time. This updates it to myself and I work for Logic PD the manufacturer of the AM3517-SOM and EVM Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23m68k: m5253evbe: Remove this boardTom Rini
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDPAdam Ford
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chipsLudwig Zenz
Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit bus width Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23ARM: imx6: configure ddrcode pins in spl DHCOM i.MX6 PDKLudwig Zenz
Preperation for conditional DDR3 initialization based on GPIO codes. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23Revert "ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK"Ludwig Zenz
This reverts commit a637fe6f27fd4c19ef9f43a5f871c244581422ac. The DDR DRAM calibration was enhanced by write leveling correction code. It can be used with T-topology now. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23pico-imx7d: README: Drop old instructions about secure modeOtavio Salvador
Our default config already has the secure mode supported, so the manual step is not required anymore. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: README: Use dfu-util to flash U-BootOtavio Salvador
The DFU allows a more user friendly use as the details where the bootloader is installed are abstracted. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Do not override addrmap5Fabio Estevam
The addrmap5 value is the same for the 512MB and 1GB variants, so there is no need to override it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add Falcon mode supportFabio Estevam
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx7d does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 10:31:50 +0000