aboutsummaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2020-09-24board/freescale: Remove P5020DS board supportPriyanka Jain
Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24powerpc:Remove P4080DS secure boot configsPriyanka Jain
Remove NXP powerpc P4080DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P3041DS secure boot configsPriyanka Jain
Remove NXP powerpc P3041DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1024RDB board supportPriyanka Jain
Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1021RDB board supportPriyanka Jain
Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020MBG board supportPriyanka Jain
Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020UTM board supportPriyanka Jain
Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1025RDB board supportPriyanka Jain
Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P1010RDB secure boot configsPriyanka Jain
Remove NXP powerpc P1010RDB secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove p1023rdb board supportPriyanka Jain
Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1010rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1_p2_rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()Hou Zhiqiang
Move vsc7835 firmware uploading to board_early_init_r(), so that the switch also can work in DM eTSEC driver. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-22sunxi: Drop the FIT-generator scriptSimon Glass
This file is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-21Merge branch '2020-09-14-generic-phy-error-trace' into nextTom Rini
- Add error tracing messages to the generic PHY infrastructure
2020-09-21Merge branch 'master' into nextTom Rini
Merge in v2020.10-rc5
2020-09-21x86: edison: Move config SYS_MALLOC_LEN to KconfigAndy Shevchenko
This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: wrap video specific funcs with ifdefsIgor Opaniuk
Wrap video specific functionality with ifdefs. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk
Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 391c712dde("colibri-imx6ull: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mpc83xx, keymile boards: enable DM_ETH and add DTSHeiko Schocher
enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-09-16rockchip: rv1108: use correct API for board callbackKever Yang
Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-15Merge tag 'ti-v2021.01-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - Hyperflash boot for J7200 - Update Main R5FSS lockstep mode - R5F remoteproc support for J7200 - Minor env fixes - Add SPI boot support for am335x-icev2
2020-09-15configs: Add spiboot support for am335xFaiz Abbas
am335x internal SRAM is too small to support the addition of SPI bootmode to the default defconfig. Add a separate spiboot_defconfig Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15board: ti: j721e: Add support for HyperFlash detectionVignesh Raghavendra
On J7200 SoC OSPI and HypeFlash are muxed at HW level and only one of them can be used at any time. J7200 EVM has both HyperFlash and OSPI flash on board. There is a user switch (SW3.1) that can be toggled to select OSPI flash vs HyperFlash. Read the state of this switch via wkup_gpio0_6 line and fixup the DT nodes to select OSPI vs HyperFlash Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-09-09board: ns3: check bnxt chimp handshake statusRayagonda Kokatanur
Chimp is a core in Broadcom netxtream controller (bnxt). Add support to check bnxt's chimp component status. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09board: ns3: kconfig: extend board kconfig with specific commandsVladimir Olovyannikov
Extend Kconfig for the board with board-specific commands selection. Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-08board: sunxi: change trace level for phy errors managed by uclassPatrick Delaunay
As the error message is now displayed by generic phy functions, the pr_err can be change to pr_idebug. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-07Merge branch 'remove-config-nr-dram-banks-v9-2020-08-26' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next
2020-09-03Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Mostly DFU fixes and r8152 fixes
2020-09-01fastboot: Extend fastboot_set_reboot_flag with reboot reasonRoman Kovalivskyi
Extend fastboot_set_reboot_flag arguments with reboot reason so that it could handle different reboot cases in future. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01x86: qemu: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply replace the rule in it. We use stub C-file like it's done for other boards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: slimbootloader: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: minnowmax: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: galileo: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: edison: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: crownbay: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: cougarcanyon2: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: cherryhill: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: bayleybay: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: efi: efi-x86_payload: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: dfi: dfi-bt700: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: coreboot: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: congatec: conga-qeval20-qa3-e3845: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: advantech: som-db5800-som-6867: Remove dead codeAndy Shevchenko
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: Introduce USE_EARLY_BOARD_INIT optionAndy Shevchenko
Introduce USE_EARLY_BOARD_INIT option and select it by the actual users. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-08-31Merge tag 'ti-v2020.10-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Update to ABI 3.0 - Fix i2c write in eeprom driver
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 17:07:24 +0000