aboutsummaryrefslogtreecommitdiff
path: root/cmd/Kconfig
AgeCommit message (Collapse)Author
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-10mmc: Add support for enumerating MMC card in a given mode using mmc commandAswath Govindraju
Add support for enumerating MMC card in a given mode using mmc rescan and mmc dev commands. The speed mode is provided as the last argument in these commands and is indicated using the index from enum bus_mode in include/mmc.h. A speed mode can be set only if it has already been enabled in the device tree. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-27cmd: setexpr: add format string handlingRoland Gaudig
Add format string handling operator to the setexpr command. It allows to use C or Bash like format string expressions to be evaluated with the result being stored inside the environment variable name. setexpr <name> fmt <format> [value]... The following example setexpr foo fmt "%d, 0x%x" 0x100 ff will result in $foo being set to "256, 0xff". Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USBTom Rini
As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07usb: Add correct depends for CMD_USB_MASS_STORAGETom Rini
We cannot build this without USB_GADGET_DOWNLOAD support enabled, add the appropriate depends line. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-30Revert "TEST: USB_HOST not USB"Tom Rini
This reverts commit 4e1903a645453deab5ec5dd1cf4f0061469b99c3. This local commit was not intended to be pushed out. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-30TEST: USB_HOST not USBTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-09cmd: Add dependency for ums commandPatrick Delaunay
Add the missing dependency for the command ums: - CONFIG_BLK: call of blk_* functions in usb_mass_storage.c - CONFIG_USB_GADGET: required to select CONFIG_USB_FUNCTION_MASS_STORAGE Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-13cmd: add support for a new "extension" commandKory Maincent
This patch adds a new "extension" command, which aims at detecting extension boards connected to the hardware platform, and apply the Device Tree overlays that describe the hardware present on those extension boards. In order to enable this mechanism, board-specific code must implement the extension_board_scan() function that fills in a linked list of "struct extension", each describing one extension board. In addition, the board-specific code must select the SUPPORT_EXTENSION_SCAN Kconfig boolean. Based on this: - "extension scan" makes the generic code call the board-specific extension_board_scan() function to retrieve the list of detected extension boards. - "extension list" allows to list the detected extension boards. - "extension apply <number>|all" allows to apply the Device Tree overlay(s) corresponding to one, or all, extension boards The latter requires two environment variables to exist and set one variable to run: - extension_overlay_addr: the RAM address where to load the Device Tree overlays - extension_overlay_cmd: the U-Boot command to load one overlay. Indeed, the location and mechanism to load DT overlays is very setup specific. - extension_overlay_name: set by the command: the name of the DT which will be load during the execution. When calling the command described in the extension_overlay_cmd variable, the variable extension_overlay_name will be defined. So a typical extension_overlay_cmd will look like this: extension_overlay_cmd=load mmc 0:1 $extension_overlay_addr /boot/$extension_overlay_name Here is an example on how to use it: => run loadfdt => fdt addr $fdtaddr => setenv extension_overlay_addr 0x1000 => setenv extension_overlay_cmd 'load mmc 0:1 ${extension_overlay_addr} /boot/${extension_overlay_name}' => extension scan Found 1 extension board(s). => extension apply 0 519 bytes read in 3 ms (168.9 KiB/s) Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
2021-04-20Add support for stack-protectorJoel Peshkin
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20cmd: CONFIG_CMD_MMC depends on CONFIG_MMCHeinrich Schuchardt
Trying to compile with CONFIG_CMD_MMC=y and CONFIG_MMC=n leads to errors: riscv64-linux-gnu-ld.bfd: cmd/built-in.o: in function `do_mmcops': cmd/mmc.c:984: undefined reference to `get_mmc_num' riscv64-linux-gnu-ld.bfd: cmd/built-in.o: in function `do_mmc_setdsr': cmd/mmc.c:873: undefined reference to `find_mmc_device' Add missing dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12cmd: xtrace: Convert to boolSean Anderson
This variable is a boolean, not a string. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-08crypto: Add blob command support for i.MX8M platformsAymen Sghaier
This patch enable blob command for mScale platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx7ulp: Enable support for cmd blobFranck LENORMAND
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependencyBreno Lima
In order to build CMD_BLOB on i.MX CAAM supported devices it's necessary to select IMX_HAB. Add IMX_HAB and CAAM supported SoCs as dependency. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-05Merge branch 'next'Tom Rini
2021-04-04cmd: CMD_USB depends on USBHeinrich Schuchardt
The usb command cannot be compiled with CONFIG_USB=n: ld.bfd: cmd/usb.c:660: undefined reference to `usb_stop' ld.bfd: cmd/usb.c:663: undefined reference to `usb_started' Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-27x86: Add a command to display coreboot sysinfoSimon Glass
This information is interesting to look at and can be important for debugging and inspection. Add a command to display it in a helpful format. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini
Prepare v2021.04-rc4
2021-03-13cmd: SCP03: enable and provision commandJorge Ramirez-Ortiz
Enable and provision the SCP03 keys on a TEE controlled secured elemt from the U-Boot shell. Executing this command will generate and program new SCP03 encryption keys on the secure element NVM. Depending on the TEE implementation, the keys would then be stored in some persistent storage or better derived from some platform secret (so they can't be lost). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-03-12tpm: Don't select LOGSimon Glass
We don't need to enable logging to run this command since the output will still appear. Drop the 'select'. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-05cmd: Fix virtio command dependencyBin Meng
The 'virtio' command calls blk_common_cmd() which is only available when CONFIG_HAVE_BLOCK_DEVICE is on. Fix the Kconfig dependency. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05cmd: Add a command to display the address mapBin Meng
This adds a new command 'addrmap' to display the address map for non-identity virtual-physical memory mappings. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-24cmd: pinmux: depend on PINCTRLMarek Behún
The pinmux command uses functions pinctrl_get_pin_*(), which are missing if PINCTRL config option is disabled. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-01cmd: CMD_ACPI depends on ACPIGENHeinrich Schuchardt
Trying to compile qemu-x86_64_defconfig with CONFIG_CMD_ACPI=y and CONFIG_ACPIGEN=n fails with ld.bfd: cmd/built-in.o: in function `do_acpi_items': cmd/acpi.c:162: undefined reference to `acpi_dump_items' Add the missing configuration dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-01-18cmd: Add a pwm commandPragnesh Patel
Add the command "pwm" for controlling the pwm channels. This command provides pwm invert/config/enable/disable functionalities via PWM uclass drivers Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-16cmd: CMD_CPU depends on CPUHeinrich Schuchardt
Compiling with CONFIG_CMD_CPU=y and CONFIG_CPU=n fails with: aarch64-linux-gnu-ld.bfd: cmd/built-in.o: in function `print_cpu_list': /home/user/u-boot/cmd/cpu.c:34: undefined reference to `cpu_get_desc' aarch64-linux-gnu-ld.bfd: /home/user/u-boot/cmd/cpu.c:39: undefined reference to `cpu_get_info' Segmentation fault (core dumped) make: *** [Makefile:1757: u-boot] Error 139 make: *** Deleting file 'u-boot' See error report in https://stackoverflow.com/questions/64678347. Add the missing build dependency. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15cmd: Add MBR partition layout control utilityMarek Szyprowski
Add a 'mbr' command to let users create or verify MBR partition layout based on the provided text description. The partition layout is alternatively read from the 'mbr_parts' environment variable. This can be used in scripts to help system image flashing tools to ensure proper partition layout. The syntax of the text description of the partition list is similar to the one used by the 'gpt' command. Supported parameters are: name (currently ignored), start (partition start offset in bytes), size (in bytes or '-' to expand it to the whole free area), bootable (boolean flag) and id (MBR partition type). If one wants to create more than 4 partitions, an 'Extended' primary partition (with 0x05 ID) has to be explicitely provided as a one of the first 4 entries. Here is an example how to create a 6 partitions (3 on the 'extended volume'), some of the predefined sizes: > setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e; name=rootfs,size=3072M,id=0x83; name=system-data,size=512M,id=0x83; name=[ext],size=-,id=0x05; name=user,size=-,id=0x83; name=modules,size=100M,id=0x83; name=ramdisk,size=8M,id=0x83' > mbr write mmc 0 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13cmd: sandbox: implement exception commandHeinrich Schuchardt
Implement the commands * exception undefined - execute an illegal instruction * exception sigsegv - cause a segment violation Here is a possible output: => exception undefined Illegal instruction pc = 0x55eb8d0a7575, pc_reloc = 0x57575 Resetting ... Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2Patrick Delaunay
Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending on CONFIG_HUSH_PARSER, and remove the default value defined in cli_hush.c under __U_BOOT__. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30cmd: log: Add commands to manipulate filtersSean Anderson
This adds several commands to add, list, and remove log filters. Due to the complexity of adding a filter, `log filter-list` uses options instead of positional arguments. These commands have been added as subcommands to log by using a dash to join the subcommand and subsubcommand. This is stylistic, and they could be converted to proper subsubcommands if it is wished. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-28cmd: Add a mux commandPratyush Yadav
This command lets the user list, select, and deselect mux controllers introduced with the mux framework on the fly. It has 3 subcommands: list, select, and deselect. List: Lists all the mux present on the system. The muxes are listed for each chip. The chip is identified by its device name. Each chip can have a number of mux controllers. Each is listed in sequence and is assigned a sequential ID based on its position in the mux chip. It lists details like ID, whether the mux is currently selected or not, the current state, the idle state, and the number of states. A sample output would look something like: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no unknown as-is 0x4 1 no 0x2 0x2 0x10 2 no 0x73 0x73 0x100 another-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x2 0x2 0x4 Select: Selects a given mux and puts it in the specified state. This subcommand takes 3 arguments: mux chip, mux ID, state to set the mux in. The arguments mux chip and mux ID are used to identify which mux needs to be selected, and then it is selected to the given state. The mux needs to be deselected before it can be selected again in another state. The state should be a hexadecimal number. For example: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 => mux select a-mux-controller 0 0x3 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 yes 0x3 0x1 0x4 1 no 0x1 0x1 0x4 Deselect: Deselects a given mux and puts it in its idle state. This subcommand takes 2 arguments: the mux chip and mux ID to identify which mux needs to be deselected. So in the above example, we can deselect mux 0 using: => mux deselect a-mux-controller 0 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-23cmd: Add a 'misc' command to access miscellaneous devicesBin Meng
Enable the command "misc" for accessing miscellaneous devices with a MISC uclass driver. The command provides listing all MISC devices as well as read and write functionalities via their drivers. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23cmd: Rename CMD_MISC to CMD_SLEEPBin Meng
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23cmd: optee_rpmb command for read/write of rpmb from opteeRuchika Gupta
Enable "optee_rpmb" command to write/read named persistent values created on RPMB by opening session with OPTEE AVB TA. This provides easy test for establishing a session with OPTEE TA and storage of persistent data in MMC RPMB. It includes following subcommands: optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB TA Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-14cmd: Add command to display or save Linux PStore dumpsFrédéric Danis
This patch adds a new pstore command allowing to display or save ramoops logs (oops, panic, console, ftrace and user) generated by a previous kernel crash. PStore parameters can be set in U-Boot configuration file, or at run-time using "pstore set" command. Records size should be the same as the ones used by kernel, and should be a power of 2. This command allows: - to display uncompressed logs - to save compressed or uncompressed logs, compressed logs are saved as a compressed stream, it may need some work to be able to decompress it, e.g. adding a fake header: "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" | cat - dmesg-ramoops-0.enc.z | gzip -dc" - ECC part is not used to check memory corruption - only 1st FTrace log is displayed or saved Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Minor updates for current design, correct spacing in rST] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-10-09Kconfig: Move autoboot options under boot optionsSimon Glass
At present the autoboot options are in cmd/Kconfig but they don't really relate to commands. They relate to booting, so move this menu under the boot menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06bloblist: Add a commandSimon Glass
It is helpful to be able to see basic statistics about the bloblist and also to list its contents. Add a 'bloblist' command to handle this. Put the display functions in the bloblist modules rather than in the command code itself. That allows showing a list from SPL, where commands are not available. Also make bloblist_first/next_blob() static as they are not used outside this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-30sntp: use udp frameworkPhilippe Reynes
This commits update the support of sntp to use the framework udp. This change allows to remove all the reference to sntp in the main network file net/net.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30cmd: irq: disable CMD_IRQ for riscv archPragnesh Patel
For RISC-V arch, no need for CMD_IRQ so disable the same. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-09-18cmd: mem: fix range of bitflip testRalph Siemsen
The bitflip test uses two equal sized memory buffers. This is achieved by splitting the range of memory into two pieces. The address of the second buffer, as well as the length of each buffer, were not correctly calculated. This caused bitflip test to access beyond the end of range. This patch fixes the pointer arithmetic problem. A second problem arises because u-boot "mtest" command expects the ending address to be inclusive. When computing (end - start) this results in missing 1 byte of the requested length. The bitflip test expects a count rather than an "ending" address. Thus it fails to test the last word of the requested range. Fixed by using (end - start + 1). Added Kconfig option to optionally disable the bitflip test, since it does add significantly to the time taken for "mtest". Fixes: 8e434cb705d463bc8cff935160e4fb4c77cb99ab ("cmd: mem: Add bitflip memory test to alternate mtest") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-27cmd: Kconfig: Change dependency for CMD_ADCMichal Simek
CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-25cmd: provide command sbiHeinrich Schuchardt
Provide a command to display information about the SBI implementation. The output might look like: => sbi SBI 0.2 OpenSBI Extensions: sbi_set_timer sbi_console_putchar sbi_console_getchar sbi_clear_ipi sbi_send_ipi sbi_remote_fence_i sbi_remote_sfence_vma sbi_remote_sfence_vma_asid sbi_shutdown SBI Base Functionality Timer Extension IPI Extension RFENCE Extension Hart State Management Extension The command can be used to construct a unit test checking that the communication with the SEE is working. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com> Tested-by: Pragnesh Patel <pragnesh.patel@openfive.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com>
2020-08-14xen: pvblock: Add initial support for para-virtualized block driverAnastasiia Lukianenko
Add initial infrastructure for Xen para-virtualized block device. This includes compile-time configuration and the skeleton for the future driver implementation. Add new class UCLASS_PVBLOCK which is going to be a parent for virtual block devices. Add new interface type IF_TYPE_PVBLOCK. Implement basic driver setup by reading XenStore configuration. Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-07fs/squashfs: add filesystem commandsJoao Marcos Costa
Add 'ls' and 'load' commands. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 02:44:26 +0000