aboutsummaryrefslogtreecommitdiff
path: root/common/Kconfig
AgeCommit message (Collapse)Author
2022-06-06Convert CONFIG_SYS_BOOTPARAMS_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOTPARAMS_LEN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-02vpl: Add Kconfig options for VPLSimon Glass
Add VPL versions of commonly used Kconfig options. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02bloblist: Correct Kconfig dependenciesSimon Glass
This feature is not available in SPL unless common/ and lib/ are built. Update the Kconfig to avoid build errors. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_RESET_PHY_R to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RESET_PHY_R Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-10event: Convert misc_init_f() to use eventsSimon Glass
This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10event: Add basic support for eventsSimon Glass
Add a way to create and dispatch events without needing to allocate memory. Also add a way to 'spy' on events, thus allowing 'hooks' to be created. Use a linker list for static events, which we can use to replace functions like arch_cpu_init_f(). Allow an EVENT_DEBUG option which makes it easier to see what is going on at runtime, but uses more code space. Dynamic events allow the creation of a spy at runtime. This is not always necessary, but can be enabled with EVENT_DYNAMIC if needed. A 'test' event is the only option for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-03Convert CONFIG_BOARD_POSTCLK_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_POSTCLK_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-13bloblist: Refactor Kconfig to support alloc or fixedSimon Glass
At present we do support allocating the bloblist but the Kconfig is a bit strange, since we still have to specify an address in that case. Partly this is because it is a pain to have CONFIG options that disappears when its dependency is enabled. It means that we must have #ifdefs in the code, either in the C code or header file. Make use of IF_ENABLED_INT() and its friend to solve that problem, so we can separate out the location of bloblist into a choice. Put the address and size into variables so we can log the result. Add the options for SPL as well, so we can use CONFIG_IS_ENABLED(). Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-13bloblist: Use 'phase' consistently for bloblistsSimon Glass
We typically refer to the different U-Boot builds that a board runs through as phases. This avoids confusion with the word 'stage' which is used with bootstage, for example. Fix up some bloblist Kconfig help which uses the wrong term. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-27Finish converting CONFIG_SYS_FSL_CLK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CLK We move the exiting option to common/Kconfig near the other options to control the contents of board_init_f() and note that this is a legacy option. We further restrict this to where the call is going to be non-empty, for the SoCs that had only been using this for some MMC-related clocks. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-05bloblist: Support allocating the bloblistSimon Glass
Typically the bloblist is positioned at a fixed address in memory until relocation. This is convenient when it is set up in SPL or before relocation. But for EFI we want to set it up only when U-Boot proper is running. Add a way to allocate it using malloc() and update the documentation to cover this aspect of bloblist. Note there are no tests of this feature at present, nor any direct testing of bloblist_init(). This can be added, e.g. by making this option controllable at runtime. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-30Convert CONFIG_LCD_DT_SIMPLEFB to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-28common: Allow a smaller console-recording pre-relocSimon Glass
Before relocation there is generally not as much available memory and not that much console output. At present the console-output buffer is the same side before and after relocation. Add a separate Kconfig option to remove this limitation. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-11Create a new boot/ directorySimon Glass
Quite a lot of the code in common/relates to booting and images. Before adding more it seems like a good time to move the code into its own directory. Most files with 'boot' or 'image' in them are moved, except: - autoboot.c which relates to U-Boot automatically running a script - bootstage.c which relates to U-Boot timing Drop the removal of boot* files from the output directory, since this interfers with the symlinks created by tools and there does not appear to be any such file from my brief testing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-10-09common: Kconfig: use 'vidconsole' name instead of old 'video'Anatolij Gustschin
After DM_VIDEO conversion the 'vidconsole' is the correct name for the frame buffer console. 'video' will not work, so update the description of the config option. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13pci: Drop DM_PCISimon Glass
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_ID_EEPROM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ID_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-21log: Allow padding of the function nameSimon Glass
At present when function names are logged, the output is a little hard to read since every function is a different length. Add a way to pad the names so that the log messages line up vertically. This doesn't work if the function name is very long, but it makes a big difference in most cases. Use 20 characters as a default since this covers the vast majority of functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Adjust the bloblist default addressSimon Glass
Move this down to provide more space for the bloblist. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-20Add support for stack-protectorJoel Peshkin
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-06Convert CONFIG_MISC_INIT_F to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_MISC_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-13common: SCP03 control (enable and provision of keys)Jorge Ramirez-Ortiz
This Trusted Application allows enabling SCP03 as well as provisioning the keys on TEE controlled secure element (ie, NXP SE050). All the information flowing on buses (ie I2C) between the processor and the secure element must be encrypted. Secure elements are pre-provisioned with a set of keys known to the user so that the secure channel protocol (encryption) can be enforced on the first boot. This situation is however unsafe since the keys are publically available. For example, in the case of the NXP SE050, these keys would be available in the OP-TEE source tree [2] and of course in the documentation corresponding to the part. To address that, users are required to rotate/provision those keys (ie, generate new keys and write them in the secure element's persistent memory). For information on SCP03, check the Global Platform HomePage and google for that term [1] [1] globalplatform.org [2] https://github.com/OP-TEE/optee_os/ check: core/drivers/crypto/se050/adaptors/utils/scp_config.c Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-29avb: AVB_VERIFY depends on MMCHeinrich Schuchardt
AVB Verified Boot uses functions related to MMC. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-01-27bloblist: Support relocating to a larger spaceSimon Glass
Typically in TPL/SPL the bloblist is quite small. But U-Boot proper may want to add a lot more to it, such as ACPI tables. Add a way to expand the bloblist by relocating it in U-Boot proper, along with the other relocation activities. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-15common: Kconfig: Introduce CONFIG_CONSOLE_RECORD_INIT_FOvidiu Panait
Currently, the following #ifdef construct is used to check whether to run console_record_init() during pre-relocation init: defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN) Introduce CONFIG_CONSOLE_RECORD_INIT_F Kconfig option to get rid of the complex ifdef check. Also, use IS_ENABLED() instead of #ifdef. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30common: update: add a generic interface for FIT imageAKASHI Takahiro
The main purpose of this patch is to separate a generic interface for updating firmware using DFU drivers from "auto-update" via tftp. This function will also be used in implementing UEFI capsule update in a later commit. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-09Kconfig: Move BOARD_TYPES under init optionsSimon Glass
This actually relates to something displayed on start-up, so move it into that menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move BOUNCE_BUFFER under driver optionsSimon Glass
This option does not belong at the top level. Move it under generic driver options. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move VERSION_VARIABLE under environmentSimon Glass
This relates to the environment so should not be at the top level. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: MISC_INIT_R and BOARD_LATE_INIT -> start-up hooksSimon Glass
These are start-up hooks so put them under that menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move startup hooks under init optionsSimon Glass
These hooks relate to U-Boot init so move them under that menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Create a new 'init options' menuSimon Glass
There are quite a few options at the top level relating to U-Boot init. Move them into their own menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move DEFAULT_FDT_FILE under boot optionsSimon Glass
This relates to booting since it is the default devicetree provided to Linux. Move it under the 'boot options' menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move SUPPORT_RAW_INITRD under boot optionsSimon Glass
This relates to booting, so move it under the 'boot images' menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move misc boot options under 'boot options'Simon Glass
There are a number of miscellaneous boot images at the top level of the kconfig menu. Move these into the 'boot options' menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move CONFIG_BOOTDELAY under autoboot optionsSimon Glass
This option relates to autoboot, so move it there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move boot media under boot optionsSimon Glass
This relates to booting, so move it under the boot menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move boot timing under boot optionsSimon Glass
This relates to booting, so move it under the boot menu. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09Kconfig: Move boot menu into common/Simon Glass
Most of the boot options are in common/Kconfig but that file is already extremely large. Create a new Kconfig.boot to hold the boot options. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-29Define default CONFIG_PREBOOT with right config optionPeter Robinson
The 44758771ee commit removes CONFIG_PREBOOT but actually sets the USE_PREBOOT Kconfig option which isn't CONFIG_PREBOOT and is also a bool option which means we regress because 'usb start' isn't run when expected, it should also be run for devices that have USB storage because keyboards aren't the only thing we might need the USB bus for. Fixes: 44758771ee ("arm: move CONFIG_PREBOOT="usb start" to KConfig") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Jonas Smedegaard <dr@jones.dk> Cc: Neil Armstrong <narmstrong@baylibre.com>
2020-09-11common: Kconfig: Add dependency for default variables stringsMichal Simek
Kconfig provides several config options for setting up default variables but these are unused when variables are passed to U-Boot via file. That's why cover this dependency in Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-24avb: Make AVB independent of fastbootUsama Arif
AVB only uses CONFIG_FASTBOOT_BUF_ADDR from fastboot for memory. This memory is used for assigning temporary buffers. This can be assigned a new variable and used as CONFIG_AVB_BUF_ADDR. This is to support future boards that support AVB but dont support USB and therefore dont support FASTBOOT. Signed-off-by: Usama Arif <usama.arif@arm.com> Cc: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com> [trini: Change defaults] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-23stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEVSimon Glass
Now that this is in Kconfig we can move the logic at the top of the file to Kconfig, and use if() instead of #if. Update the file with these changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SYS_DEVICE_NULLDEV to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04arm: move CONFIG_PREBOOT="usb start" to KConfigJonas Smedegaard
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf60bf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-07-09log: don't show function by defaultHeinrich Schuchardt
The name of the function emitting a log message may be of interest for a developer but is distracting for normal users. See the example below: try_load_entry() Booting: Debian Make the default format for log messages customizable. By default show only the message text. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11log: clean up KconfigHeinrich Schuchardt
LOG_DEFAULT_LEVEL has been chosen as 6. Adjust the default of LOG_MAX_LEVEL to this value. Use ranges to clamp log levels to reasonable values. Group output options by main U-Boot, SPL, TPL, followed by other logging options. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 17:34:09 +0000