aboutsummaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)Author
2006-08-13Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-08-07Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk
2006-08-07Fix control-c handing in CONFIG_CMDLINE_EDITINGStefan Roese
Properly pass break code back from readline. Patch by Roger Blofeld, 31 Jul 2006
2006-08-07Change "mii info" to not print an error upon missing PHY at addressStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-08-03Prevent USB commands from working when USB is stopped.Bartlomiej Sieka
2006-08-02Add rudimentary handling of alternate settings of USB interfaces - to fixBartlomiej Sieka
problems with some USB storage devices. Some code readability improvements.
2006-07-27Fix CONFIG_CMDLINE_EDITING implementationStefan Roese
Patch by Stefan Roese, 27 Jul 2006
2006-07-21More code cleanupWolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Make code better readable.Wolfgang Denk
Patch by Ladislav Michl, 14 Sep 2005
2006-07-21Minor code cleanup.Wolfgang Denk
2006-07-21Add readline cmdline-editing extensionWolfgang Denk
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Check argument count in "mii" command.Wolfgang Denk
Problem pointed out by Andrew Dyer, 13 Jun 2005
2006-07-19Add support for new TQM5200 revisionsWolfgang Denk
- Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-13Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.Bartlomiej Sieka
2006-07-10Major PCMCIA Cleanup to make code better readable and maintainable.Wolfgang Denk
Notes: - Board-dependend code for RPXLITE and RPXCLASSIC-based boards placed to the drivers/rpx_pmcia.c file to avoid duplication. Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). - drivers/i82365.c has been split into two parts located at board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are the only boards using CONFIG_82365). - Changes were tested for clean build and *very* *few* boards.
2006-06-30Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz
2006-06-30Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz
2006-06-16Add support for gth2 boardWolfgang Denk
Patch by Thomas Lange, Aug 11 2005
2006-06-16Add support for CONFIG_SERIAL_MULTI on MPC5xxxWolfgang Denk
Patch by Martin Krause, 8 Jun 2006 This patch supports two serial consoles on boards with a MPC5xxx CPU. The console can be switched at runtime by setting stdin, stdout and stderr to the desired serial interface (serial0 or serial1). The PSCs to be used as console port are definded by CONFIG_PSC_CONSOLE and CONFIG_PSC_CONSOLE2. See README.serial_multi for details.
2006-05-30* Update Intel IXP4xx supportWolfgang Denk
- Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
2006-05-15Fix PCMCIA support on virtlab2Wolfgang Denk
2006-05-12Cleanup compile warning.Wolfgang Denk
2006-05-12Add support for VirtLab2 boardWolfgang Denk
(needed because of differences in the PCMCIA hardware).
2006-05-10Fix compile warnings in common/xyzModem.cStefan Roese
Patch by Stefan Roese, 10 May 2006
2006-05-09Merge with /home/m8/git/u-bootWolfgang Denk
2006-05-09Add M5271EVB board support.Marian Balakowicz
2006-05-02Declare load_serial_ymodem() when using CFG_CMD_LOADB.Wolfgang Denk
Patch by Jon Loeliger, 01. May 2006
2006-04-16Some code cleanupWolfgang Denk
2006-04-16Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk
2006-04-12Merge with /home/m8/git/u-bootWolfgang Denk
2006-04-11Fixes common/cmd_flash.c:Heiko Schocher
- fix some compiler/parser error, if using m68k tool chain - optical fix for protect on/off all messages, if using more then one bank Patch by Jens Scharsig, 28 July 2005
2006-04-06Merge with /home/sr/git/u-boot/cfi-flashWolfgang Denk
2006-04-05Remove dependencies between DoC code and old legacy NAND driver.Marian Balakowicz
Necessary defines and data structures were copied to DoC specific files so that legacy NAND code could be entirely removed from u-boot tree in the near future.
2006-04-01* Add support for ymodem protocol downloadWolfgang Denk
Patch by Stefano Babic, 29 Mar 2006 * Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 Merge with /home/mk/8-benq/u-boot
2006-04-01* Changes/fixes for drivers/cfi_flash.c:Stefan Roese
- Add Intel legacy lock/unlock support to common CFI driver On some Intel flash's (e.g. Intel J3) legacy unlocking is supported, meaning that unlocking of one sector will unlock all sectors of this bank. Using this feature, unlocking of all sectors upon startup (via env var "unlock=yes") will get much faster. - Fixed problem with multiple reads of envronment variable "unlock" as pointed out by Reinhard Arlt & Anders Larsen. - Removed unwanted linefeeds from "protect" command when CFG_FLASH_PROTECTION is enabled. - Changed p3p400 board to use CFG_FLASH_PROTECTION Patch by Stefan Roese, 01 Apr 2006 * Changes/fixes for drivers/cfi_flash.c: - Correctly handle the cases where CFG_HZ != 1000 (several XScale-based boards) - Fix the timeout calculation of buffered writes (off by a factor of 1000) Patch by Anders Larsen, 31 Mar 2006
2006-03-31GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk
2006-03-30Add support for ymodem protocol (loady command).Markus Klotzbuecher
Patch by Stefano Babic, 29 Mar 2006
2006-03-24Merge with http://www.denx.de/git/u-boot.gitMarkus Klotzbuecher
2006-03-20Support for redundant environment in NAND Flash.Markus Klotzbuecher
2006-03-13Change max size of uncompressed uImage's to 8MByte and addStefan Roese
CFG_BOOTM_LEN to adjust this setting. As mentioned by Robin Getz on 2005-05-24 the size of uncompressed uImages was restricted to 4MBytes. This default size is now increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN in the board config file. Patch by Stefan Roese, 13 Mar 2006
2006-03-13Change the sequence of events in soft_i2c.c:send_ack() to keep fromWolfgang Denk
incorrectly generating start/stop conditions on the bus. Patch by Andrew Dyer, 26 Jul 2005
2006-03-12Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infrWolfgang Denk
2006-03-12Adjust "echo" as a default commandWolfgang Denk
Patch by Sam Song, 19 Jun 2005
2006-03-12Coding Style cleanupWolfgang Denk
2006-03-12Avoid dereferencing NULL in find_cmd() if no valid commands were foundWolfgang Denk
Patch by Andrew Dyer, 13 Jun 2005
2006-03-12Add ADI Blackfin supportWolfgang Denk
- add support for Analog Devices Blackfin BF533 CPU - add support for the ADI BF533 Stamp uClinux board - add support for the ADI BF533 EZKit board Patches by Richard Klingler, June 11th 2005:
2006-03-12Add loads of ntohl() in image header handlingWolfgang Denk
Patch by Steven Scholz, 10 Jun 2005
2006-03-12Fix comment in common/soft_i2c.cWolfgang Denk
Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
2006-03-11Some code cleanup for GCC 4.xWolfgang Denk
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:44:45 +0000