aboutsummaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)Author
2019-02-07spl: Kconfig: Enable SPI_FLASH_TINY by default for SPLVignesh R
SPL only needs to be able to read from SPI Flash to load next stage and does not really need write/erase etc. Therefore in order to reduce SPI Flash code size in SPL, enable SPI_FLASH_TINY, that only supports reading from SPI flash, as default. Note: Since, SPI_FLASH_TINY does not support SPI_FLASH_BAR, SPI_FLASH_TINY is not enabled for boards with SPI controllers that cannot support 4 byte addressing. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: Add lightweight SPI flash stack for SPLVignesh R
Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: spi-nor-core: Add SFDP supportVignesh R
Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-02lmb: handle more than one DRAM BANKSimon Goldschmidt
This fixes the automatic lmb initialization and reservation for boards with more than one DRAM bank. This fixes the CVE-2018-18439 and -18440 fixes that only allowed to load files into the firs DRAM bank from fs and via tftp. Found-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-01spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4Tien Fong Chee
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01spl: fat/fs: Add option to include/exclude FAT write build in SPLTien Fong Chee
Most of the time SPL only needs very simple FAT reading, so having CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help to save 64KiB default max clustersize from memory. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FATTien Fong Chee
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-26linker: Modify linker scripts to be more genericTom Rini
Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE. This lets us re-use the same script for both SPL and TPL. Add logic to scripts/Makefile.spl to pass in the right value when preprocessing the script. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26dfu: Remove dependency on HUSH parser in SPLAndrew F. Davis
CLI support with the HUSH parser is not currently SPL safe due to it's use of realloc. That function is not defined for SPLs that use SYS_MALLOC_SIMPLE. CLI support can be built in to SPL and some functions do work, but use of some like run_command() will cause build to fail. When no SPL code calls this function build works as the compiler removes this unreachable code so the unresolved symbols are ignored. If DFU support is enabled in SPL then MMU DFU support may get brought in also, this code does make a call to run_command() causing build to fail if the HUSH parser is not built-in. To break this odd and unneeded dependency chain we use CONFIG_IS_ENABLED where appropriate to prevent calls into HUSH code from SPL. This also removes our need to pull in the rather unrelated source file when SPL_DFU is defined. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-26spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFUAndrew F. Davis
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-18common: spl: Kconfig: spelling fixesChris Packham
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16bootm: use new common function lmb_init_and_reserveSimon Goldschmidt
This reduces duplicate code only. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16fdt: parse "reserved-memory" for memory reservationSimon Goldschmidt
boot_fdt_add_mem_rsv_regions() adds reserved memory sections to an lmb struct. Currently, it only parses regions described by /memreserve/ entries. Extend this to the more commonly used scheme of the "reserved-memory" node. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dmTom Rini
Fix recent changes to serial API for driver model Buildman clang support and a few fixes Small fixes to 'dm tree' and regmap test Improve sandbox build compatibility A few other minor fixes
2019-01-15common: command: Add support for $ auto-completionBoris Brezillon
Add the dollar_complete() function to auto-complete arguments starting with a '$' and use it in the cmd_auto_complete() path such that all args starting with a $ can be auto-completed based on the available env vars. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Fix some linking problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-15common: command: Rework the 'cmd is repeatable' logicBoris Brezillon
The repeatable property is currently attached to the main command and sub-commands have no way to change the repeatable value (the ->repeatable field in sub-command entries is ignored). Replace the ->repeatable field by an extended ->cmd() hook (called ->cmd_rep()) which takes a new int pointer to store the repeatable cap of the command being executed. With this trick, we can let sub-commands decide whether they are repeatable or not. We also patch mmc and dtimg who are testing the ->repeatable field directly (they now use cmd_is_repeatable() instead), and fix the help entry manually since it doesn't use the U_BOOT_CMD() macro. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15common: command: Expose a generic helper to auto-complete sub commandsBoris Brezillon
Some commands have a table of sub-commands. With minor adjustments, complete_cmdv() is able to provide auto-completion for sub-commands (it's just about passing the table of commands instead of taking the global one). We rename this function into complete_subcmd() and implement complete_cmdv() as a wrapper around complete_subcmdv(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15common: command: Fix command auto-completionBoris Brezillon
When auto-completing command arguments, the last argument is not necessarily the one we need to auto-complete. When the last character is a space, a tab or '\0' what we want instead is list all possible values, or if there's only one possible value, place this value on the command line instead of trying to suffix the last valid argument with missing chars. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15common: Kconfig: miscellaneous spelling fixesChris Packham
Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15xyz-modem: Fix timeout loop waiting with WATCHDOGLokesh Vutla
Commit 2c77c0d6524eb ("xyz-modem: Change getc timeout loop waiting") fixes the loop delay when using a hw watchdog, assuming that watchdog kicking is taken care of by getc(). But the xyzmodem driver tries to do a getc only after confirming that a character is available like below: while (!tstc()) { till timeout; } if (tstc()) *c = getc(); and getc() does a watchdog reset only if it fails to see a character. In this case, getc() always sees a character and never does a watchdog reset. So to make sure that watchdog doesn't get reset while loading the file, do a watchdog reset just before starting the image loading. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15spl: ymodem: Add support for loading gzip compressed uImageMarek Vasut
Add support for gunzip-ing gzip-compressed uImages in the SPL Ymodem code. Loading data over Ymodem can be gruelingly slow, gzip-ing the data can reduce that aggravating slowness at least slightly (depends on the data, u-boot.bin compresses to ~1/3 of it's original size on ARM64), hence add optional support for decompressing gzip-compressed uImages. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2019-01-14common: fdt_support: print hexadecimal numbers in debugSekhar Nori
We usually deal with hexadecimal addresses and sizes in device-tree. Its much easier if debug logs print hexadecimal values too. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-14image: fix compiling without CMD_FDTSimon Goldschmidt
Booting an image currently sets the environment variable "fdtaddr" by calling into 'cmd/fdt.c'. As a result, linking U-Boot fails if CMD_FDT is not enabled. Fix this by adding 'if (CONFIG_IS_ENABLED(CMD_FDT))' to the two places where 'set_working_fdt_addr()' is called. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-10Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGETJean-Jacques Hiblot
The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx8m: Enable CONFIG_SPL_FIT_IMAGE_TINY for iMX8MYe Li
If we don't define CONFIG_SPL_FIT_IMAGE_TINY, when loading images from FIT, the SPL will record all loadables' info to u-boot's FDT. This causes problem when HAB is enabled, because FDT's content is modified before we authenticate it. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01tools: add i.MX8M image supportPeng Fan
i.MX8M bootable image type is like i.MX6/7, but there is signed HDMI firmware image in front of A53 bootable image, which is also has an IVT header. Here we also include fit image to generate a bootable image. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-01-01SPL: Add HAB image authentication to FITYe Li
Introduce two board level callback functions to FIT image loading process, and a SPL_FIT_FOUND flag to differentiate FIT image or RAW image. Implement functions in imx common SPL codes to call HAB funtion to authenticate the FIT image. Generally, we have to sign multiple regions in FIT image: 1. Sign FIT FDT data (configuration) 2. Sign FIT external data (Sub-images) Because the CSF supports to sign multiple memory blocks, so that we can use one signature to cover all regions in FIT image and only authenticate once. The authentication should be done after the entire FIT image is loaded into memory including all sub-images. We use "-p" option to generate FIT image to reserve a space for FIT IVT and FIT CSF, also this help to fix the offset of the external data (u-boot-nodtb.bin, ATF, u-boot DTB). The signed FIT image layout is as below: -------------------------------------------------- | | | | | | | | | FIT | FIT | FIT | | U-BOOT | ATF | U-BOOT | | FDT | IVT | CSF | | nodtb.bin | | DTB | | | | | | | | | -------------------------------------------------- Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-12-31riscv: bootm: Support booting VxWorksBin Meng
Register the 'bootm' function for booting VxWorks kernel for RISC-V architecture. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-31bootm: vxworks: Make do_bootm_vxworks() non-staticBin Meng
For future extension to other architectures, make do_bootm_vxworks() a non-static function. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-31bootm: vxworks: Make do_bootvx_fdt() staticBin Meng
Change the scope of do_bootvx_fdt() to static since it is only used in common/bootm_os.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-14usb: musb-new: Add support for DM_USBJean-Jacques Hiblot
Enable DM for USB peripheral in the musb-new driver. Also make sure that the driver can be used in the SPL. This implies that: * the driver must work with and without the OF_CONTROL option. That in turn, implies that the platform data can be passed in a struct ti_musb_platdata or be read from the dtb * usb.o is linked in the SPL if host support is enabled Another change is that the driver does not fail to bind (and stop the boot process) if one of the child driver does not bind. Reporting the error is enough. This kind of error would appear if the port is configured in the DTS but the driver is not activated in the config. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14spl: net: dm: usb: bind the gadget before attempting to load the imageJean-Jacques Hiblot
If DM_USB_GADGET is used, the usb ethernet gadget driver must be bound to a controller before the image can be downloaded over the network. In u-boot this can be done with the bind command. In SPL it must be done programmatically. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-12spl: fix build failure with !CONFIG_SPL_PCI_SUPPORTSekhar Nori
Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-12blk: Rework guard around part_init callTom Rini
The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC3 and UDC cleanup
2018-12-08Roll CRC16-CCITT into the hash infrastructurePhilipp Tomsich
The CRC16-CCITT checksum function is useful for space-constrained applications (such as obtaining a checksum across a 2KBit or 4KBit EEPROM) in boot applications. It has not been accessible from boot scripts until now (due to not having a dedicated command and not being supported by the hash infrstructure) limiting its applicability outside of custom commands. This adds the CRC16-CCITT (poly 0x1021, init 0x0) algorithm to the list of available hashes and adds a new crc16_ccitt_wd_buf() to make this possible. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Fix building crc16.o for SPL/TPL] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-08lib: merge CRC16-CCITT into u-boot/crc.hPhilipp Tomsich
This merges the CRC16-CCITT headers into u-boot/crc.h to prepare for rolling CRC16 into the hash infrastructure. Given that CRC8, CRC32 and CRC32-C already have their prototypes in a single header file, it seems a good idea to also include CRC16-CCITT in the same. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-07usb: gadget: Do not call board_usb_xxx() directly in USB gadget driversJean-Jacques Hiblot
Add 2 functions to wrap the calls to board_usb_init() and board_usb_cleanup(). This is a preparatory work for DM support for UDC drivers (DM_USB_GADGET). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-06main: Drop more #ifdefsSimon Glass
Now that many things are converted to Kconfig we can drop most of the Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Various MTD fixes from Boris - Zap various unused / legacy paths. - pxa3xx NAND update from Miquel Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-05Merge tag 'video-updates-for-2019.01-rc2' of git://git.denx.de/u-boot-videoTom Rini
video, bmp and cls command updates
2018-12-04video: use BMP_ALIGN_CENTER define from splash.hAnatolij Gustschin
Drop BMP_ALIGN_CENTER define in lcd.c and video_bmp.c as it is already defined by splash.h. Include splash.h in bmp code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-12-04cmd: add clear screen 'cls' commandAnatolij Gustschin
Add common clear screen command for configurations CONFIG_DM_VIDEO, CONFIG_LCD and CONFIG_CFB_CONSOLE. Remove the existing cls command implementation from lcd.c code and activate the command for all boards enabling CONFIG_LCD for compatibility reasons. Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Patrick.Delaunay <patrick.delaunay@free.fr>
2018-12-03Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-12-03 This release is fully packed with lots of glorious improvements in UEFI land again! - Make PE images more standards compliant - Improve sandbox support - Improve correctness - Fix RISC-V execution on virt model - Honor board defined top of ram (fixes a few boards) - Imply DM USB access when distro boot is available - Code cleanups
2018-12-03board_r: fix build with DM_SPIChristophe Leroy
CC common/board_r.o common/board_r.c:747:2: error: ‘initr_spi’ undeclared here (not in a function) initr_spi, ^ make[1]: *** [common/board_r.o] Error 1 Fixes: ebe76a2df9f6 ("dm: Remove spi_init() from board_r.c when using driver model") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03rsa: add support of padding pssPhilippe Reynes
We add the support of the padding pss for rsa signature. This new padding is often recommended instead of pkcs-1.5. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03rsa: add a structure for the paddingPhilippe Reynes
The rsa signature use a padding algorithm. By default, we use the padding pkcs-1.5. In order to add some new padding algorithm, we add a padding framework to manage several padding algorithm. The choice of the padding is done in the file .its. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-02fdt_support: fdt reservations on the sandboxHeinrich Schuchardt
On the sandbox the memory addresses in the device tree refer to the virtual address space of the sandbox. This implies that the memory reservations for the fdt also have to be converted to this address space. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:00:40 +0000