aboutsummaryrefslogtreecommitdiff
path: root/configs/T1024RDB_NAND_defconfig
AgeCommit message (Collapse)Author
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_RTC_DS1337 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 CONFIG_RTC_DS1374 CONFIG_RTC_DS3231 CONFIG_RTC_MC13XXX CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_INIT_RAM_LOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_FSL_CORENET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_CORENET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_QUIET_TEST to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FLASH_QUIET_TEST Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_EMPTY_INFO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FLASH_EMPTY_INFO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08Convert CONFIG_SYS_CACHE_STASHING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CACHE_STASHING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_FSL_CPC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CPC CONFIG_SYS_CPC_REINIT_F Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOK3E_HV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOK3E_HV Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28powerpc: mpc85xx: Set TEXT_BASE addresses to real base valuesPali Rohár
Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are manually increased by 0x1000 due to .bootpg section. This section has size of 0x1000 bytes and is manually put by linker script before .text section (and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Due to this fact lot of other config options are manually increased by 0x1000 value to make correct layout. Note that entry point is not on CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image). Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Put .bootpg code directly into .text section and move text base address to the start of .bootpg code. And finally remove +0x1000 value from lot of config options. With this removal custom PHDRS is not used anymore, so remove it too. After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at address -0x1000 anymore. Tested on P2020 board with SPL and proper U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-06Convert CONFIG_SPL_GD_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_GD_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_RELOC_TEXT_BASE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_RELOC_STACK CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usageTom Rini
A number of PowerPC platforms define this, for SPL. To move this to Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use CONFIG_IS_ENABLED() to check for usage. A number of layerscape platforms bring this logic from PowerPC, but only need a small part of it, for the fman driver. Remove their unused portion at least. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_INIT_MINIMAL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-26powerpc: mpc85xx: Remove duplicate u-boot-nand.ldsPali Rohár
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-13configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-12PPC: Enable Job ring driver model.Gaurav Jain
removed sec_init() call from board files. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-04-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTFILE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-01configs: fsl: add missing FMAN/QE_FW_ADDR definesCamelia Groza
The initial patch had typos that caused four defconfigs to miss the symbol transition to Kconfig. CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_FMAN_FW_ADDR are currently initialized to 0 by default on these builds, which prevents the firmware from loading. Add the correct symbols to these defconfigs. Fixes: a97a071d10d2b ("configs: fsl: migrate FMAN/QE specific defines to Kconfig") Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-01-24configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_SYS_NAND_U_BOOT_OFFS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-05configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_NAND_FSL_ELBC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NAND_FSL_ELBC CONFIG_NAND_FSL_IFC Note that a number of PowerPC platforms had previously enabled CONFIG_NAND_FSL_ELBC without CONFIG_MTD_RAW_NAND, and now they no longer enable the option, reducing the size of a few functions. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SPL_NAND_LOAD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDRSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 06:25:52 +0000