aboutsummaryrefslogtreecommitdiff
path: root/configs/imx8mp_dhcom_pdk2_defconfig
AgeCommit message (Collapse)Author
2024-07-06ARM: imx: Enable PCA953x driver on DH i.MX8MP DHCOM PDK2Marek Vasut
Enable PCA953x GPIO expander driver in DH i.MX8MP DHCOM PDK2 configuration. The PCA9539 GPIO expander is used on production DH i.MX8MP DHCOM SoM rev.200. This is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align the two configurations. Fixes: 9de599ec3d59 ("arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200") Signed-off-by: Marek Vasut <marex@denx.de>
2024-07-06ARM: imx: Enable cat and xxd commands on DH i.MX8M Plus DHCOMMarek Vasut
Enable 'cat' command to print file from filesystem to stdout. Enable 'xxd' command to hexdump file from filesystem to stdout. Signed-off-by: Marek Vasut <marex@denx.de>
2024-06-24ARM: imx: Enable SPL DTO application support for i.MX8MP DHCOM PDK2Marek Vasut
Enable SPL DTO support to apply matching SoM specific DTOs to cater for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align the two configurations. Fixes: ad1158c50e0e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM") Signed-off-by: Marek Vasut <marex@denx.de>
2024-06-13net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbolMarek Vasut
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol. This removes one more configuration headers option finalizes its Kconfig symbol conversion. No functional change expected. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-04-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-22ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOMMarek Vasut
Linux 6.6.y with KASLR enabled would print the following message on boot: " KASLR disabled due to lack of seed " Enable the 'kaslrseed' command so a random number seed can be pulled from CAAM and inserted into the /chosen node 'kaslr-seed' property of Linux kernel DT before boot, thus letting KASLR work properly. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2024-01-22ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOMMarek Vasut
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init() during the SPL start up. On this particular system, spl_board_init() is used to reconfigure GIC clock parent to PLL2 500M, which is the configuration expected by the Linux kernel. Enable SPL_BOARD_INIT . Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not allow to change it. Should set the clock after PMIC setting done. Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for ND VDD_SOC. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-03Merge tag 'v2024.01-rc6' into nextTom Rini
Prepare v2024.01-rc6
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-12-18Merge tag 'v2024.01-rc5' into nextTom Rini
Prepare v2024.01-rc5
2023-12-16ARM: imx: Update DRAM timings with inline ECC on DH i.MX8MP DHCOM SoMMarek Vasut
Import DRAM timings generated by the DDR tool 3.31 which introduce assorted tweaks to the DRAM controller settings. Furthermore, enable DBI to improve noise resilience of the DRAM bus by reducing the number of bit changes on the bus. Reduce the DRAM rate to 3600 MTps to remove all remaining correctable errors reported by EDAC . It is not entirely clear why the slightly faster setting does produce sporadic correctable errors, while this one does not, but this could be related to simpler PLL setting at 3600 MTps. Enable inline ECC which is necessary to detect ECC errors and collect statistics by the EDAC driver in Linux. This reduces the DRAM size by 64 MiB for each 512 MiB of DRAM, so for a 4 GiB device the available DRAM size becomes 3.5 GiB and for 2 GiB device the available DRAM size becomes 1.8 GiB. Signed-off-by: Marek Vasut <marex@denx.de>
2023-12-14ARM: imx: Enable CAAM on DH i.MX8M Plus DHCOMMarek Vasut
Enable CAAM in U-Boot to make crypto available early in the boot process. This has a side-effect that in case an older kernel version contains a broken CAAM initialization timeout code, initialization in bootloader will help that old kernel version function correctly. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-14arm64: imx8mp: Enable TCP, IPv6, wget on DH i.MX8MP DHCOMMarek Vasut
Enable support for TCP protocol, wget, and IPv6 on this platform. The former two allow users download payload into the U-Boot from a web server, which may be more convenient or easier to set up than TFTP server. The later is enabled to future proof the IP stack on this platform. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-02Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOMMarek Vasut
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects. Without this change, the board will fail to suspend/resume e.g. in Linux. Signed-off-by: Marek Vasut <marex@denx.de>
2023-08-09Kconfigs: Correct default of "0" on hex type entriesTom Rini
It is not a parse error to have a default value of "0" for a "hex" type entry, instead of "0x0". However, "0" and "0x0" are not treated the same even by the tools themselves. Correct this by changing the default value from "0" to "0x0" for all hex type questions that had the incorrect default. Fix one instance (in two configs) of a default of "0" being used on a hex question to be "0x0". Remove the cases where a defconfig had set a value of "0x0" to be used as the default had been "0". Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-30ARM: imx: Enable LTO for DH electronics i.MX8M Plus DHCOMMarek Vasut
Enable LTO to reduce the size of SPL, which with multiple DRAM calibration tables may be close to the limit. Signed-off-by: Marek Vasut <marex@denx.de>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-31arm64: imx8mp: Enable SMSC LAN87xx PHY driver on i.MX8MP DHCOMMarek Vasut
These SoMs may ship with SMSC LAN8740Ai PHYs, enable the SMSC PHY driver. Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-31arm64: imx8mp: Disable Atheros PHY driver on i.MX8MP DHCOMMarek Vasut
These SoMs never ship with Atheros PHYs, disable the Atheros PHY driver. Signed-off-by: Marek Vasut <marex@denx.de>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21ARM: imx: Enable btrfs support on DHSOMMarek Vasut
The btrfs filesystem provides advanced functionality like copy-on-write and snapshots, as well as metadata and data duplication and checksumming. Enable btrfs in U-Boot to permit even the primary partition to be btrfs and let system boot from it. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-09-18ARM: imx: Enable SPL GPIO hog on i.MX8M Plus DHCOMMarek Vasut
Enable GPIO hog support in SPL to match the GPIO hog support in U-Boot proper. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOMMarek Vasut
Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2Marek Vasut
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 12:45:11 +0000