aboutsummaryrefslogtreecommitdiff
path: root/configs/smegw01_defconfig
AgeCommit message (Collapse)Author
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-16smegw01: Convert to watchdog driver modelFabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2023-10-16smegw01: Remove misuse of CONFIG_ENV_IS_NOWHEREEduard Strehlau
When using a list of writeable variables, the initial values come from the built-in default environment since commit 5ab81058364b ("env: Complete generic support for writable list"). Remove unnecessary misuse of CONFIG_ENV_IS_NOWHERE as default environment. Based on the fix done by commit b16fd7f75f6d ("imx6q: acc: Remove misuse of env is nowhere driver"). Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-28smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logicEduard Strehlau
CONFIG_SYS_BOOT_LOCKED means that a restricted boot environment will be used. In this case, hab_auth_img_or_fail should be called to prevent U-Boot to continue running when the fitImage authentication fails. Fix the logic accordingly. Additionally, select CONFIG_SYS_BOOT_LOCKED by default. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23smegw01: Use CONFIG_SYS_LOAD_ADDR for loading fitImageEduard Strehlau
Set CONFIG_SYS_LOAD_ADDR=0x88000000 and use this address for loading fitImage. Also pass the standard CONFIG_BOOTFILE option to indicate the fitImage file. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-06-26smegw01: Fix duplicate bootcmdEduard Strehlau
Two conflicting bootcmds were included in the environment. Streamline to defining the bootcmd only in the env file. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-02smegw01: Fix fallback to altbootcmdEduard Strehlau
The bootcmd/altbootcmd mechanism is not invoked for bootmenus. Manually compare bootcount and bootlimit to implement fallback on all codepaths. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Disable additional boot menu optionsEduard Strehlau
Defaults have changed, we do not want the bootmenu to contain EFI options. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Add lockdown U-Boot env supportEduard Strehlau
Add lockdown U-Boot env support so that only certain U-Boot environment variables are allowed to be modified. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Enable EMMC boot from multiple partitionsEduard Strehlau
GPT Partition labels are used for determining the right root filesystem to boot from. The U-Boot environment is configured to reside in the eMMC hardware boot partition we are currently booted from. This should enable a dual copy approach for upgrading the bootloader. One can overwrite the inactive hardware partition with new bootloader and environment and afterwards switch the eMMC boot partition for an atomic bootloader switch. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Run altbootcmd in the case of failureEduard Strehlau
Run the altbootcmd script if any step of bootcmd fails. This ensures that always a valid image can be run. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Add altbootcmdEduard Strehlau
Add an altbootcmd script, which is convenient way to integrate with swupdate and perform a roll back of the previous working version in the case of update failure. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Select bootcount supportEduard Strehlau
Add automatic boot counter that increases after every reset. After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it is disabled if bootlimit isn't set. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-05-02smegw01: Select CONFIG_CMD_SQUASHFSEduard Strehlau
Select CONFIG_CMD_SQUASHFS so that the SquashFS U-Boot commands are available. Signed-off-by: Eduard Strehlau <eduard@lionizers.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-19smegw01: Select IMX_HABFabio Estevam
Select IMX_HAB to allow secure boot. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-10-19smegw01: Add redundant environment supportFabio Estevam
Add redundant environment support as it is required by SWUpdate. While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow more headroom. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-10smegw01: Select the CMD_UNZIP optionFabio Estevam
Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash .gz image into the eMMC. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-09mx7d: Add Storopack's SMEGW01 boardFabio Estevam
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 14:23:24 +0000