aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2022-12-05Convert CONFIG_SYS_NAND_PAGE_2K et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_2K CONFIG_SYS_NAND_PAGE_4K Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_MAX_OOBFREE CONFIG_SYS_NAND_MAX_ECCPOS Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC_OOBFIRST Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05configs: Add IPV6 config to sandbox_flattree_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox64_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05arm64: versal-net: Enable defconfig for Micron octal flashesAshok Reddy Soma
Micron mt35 series octal flashes are under config option CONFIG_SPI_FLASH_MT35XU. Enable it in default defconfig for octal flashes to be detected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dfaf73a72c7b408f1b8530f411c405d3dcf9f854.1669717110.git.michal.simek@amd.com
2022-12-05arm64: zynqmp: Do not enable IPI by defaultMichal Simek
ZynqMP mini configurations are not using IPI driver and enabling this is adding additional ~1200 Bytes (depends on configuration). This ends up in situation that there is no enough space in OCM for relocation that's why disable this driver for all mini configurations. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c71bab3927cb71ae517d9c21f59f3d5cf0caf712.1669734580.git.michal.simek@amd.com
2022-12-05arm64: zynqmp: Do not include psu_init to U-Boot by defaultMichal Simek
The commit ed35de617013 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by default which is not correct configuration. Intention of this config was to have it enabled by default for SPL and provide an option to users to also do low level initialization directly from U-Boot. That's why it is necessary to define second symbol with SPL marking in it and properly use symbols depends on usage in Makefile. Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL is enabled. Reported-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/d5fcbd66b05bf0d7ef594e66464ee23b48c5e4cc.1669969083.git.michal.simek@amd.com
2022-12-05xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entriesMichal Simek
The commit ba74bcf3e07b ("xilinx: common: Remove zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr() because xlnx,eeprom link via DT chosen node is no longer used. But forget to remove Kconfig entries which are used by this code only. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f97451ed33409838efea4071553b6da795cfc578.1669192026.git.michal.simek@amd.com
2022-12-05arm64: versal: Enable REMAKE_ELF for mini_ospi/mini_qspiVenkatesh Yadav Abbarapu
Enable the config REMAKE_ELF in xilinx_versal_mini_ospi_defconfig and xilinx_versal_mini_qspi_defconfig which generates u-boot.elf. This commit a8c281d4b737("Convert CONFIG_REMAKE_ELF to Kconfig") misses to enable this config in these defconfigs. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20221125084639.23835-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-02am335x-evm: Support STMicro/Micron SPI flashPaul Barker
This change enables access to the SPI flash on the SanCloud BBE Lite board. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-12-02am335x-evm: Fix spiboot configurationPaul Barker
The advanced address translation provided by CONFIG_SPL_OF_TRANSLATE is needed to determine the base address of the uart0 peripheral on am335x platforms when CONFIG_SPL_OF_CONTROL is enabled. If CONFIG_SPL_OF_CONTROL is enabled in the base (non-spiboot) am335x_evm_defconfig, then CONFIG_SPL_OF_TRANSLATE will also need to be enabled there. Unfortunately this cannot be done pre-emptively due to the kconfig dependencies. The TI clk-ctrl & TI sysc drivers are also required to bring up the SPI bus on am335x platforms. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-12-02config: tools only: add VIDEO to build bmp_logoPeter Robinson
Pre 2023.01 the bmp_logo was built as part of the tools-only_defconfig build, something changed and the VIDEO dep needed to build it is no longer pulled in so fix that by explicitly defining it. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-22arm64: versal: Add octal spi flash mini u-boot configurationAshok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support octal spi flash and uses DCC terminal for console output. Add required dts for octal spi flash mini u-boot configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-4-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22arm64: versal: Add qspi flash mini u-boot configurationAshok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a smaller footprint from on chip memory(OCM). This configuration has required CONFIG's enabled to support qspi flash and uses DCC terminal for console output. Add required dts files for qspi mini configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221116141155.14788-2-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22soc: xilinx: versal-net: Add soc_xilinx_versal_net driverMichal Simek
Add soc_xilinx_versal_net driver to identify the family & revision of versal-net SoC. Add Kconfig option CONFIG_SOC_XILINX_VERSAL_NET to enable/disable this driver. To enable this driver by default, add this config to xilinx_versal_net_virt_defconfig file. This driver will be probed using platdata U_BOOT_DEVICE structure which is specified in mach-versal-net/cpu.c. Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/613d6bcffd9070f62cf348079ed16c120f8fc56f.1668612993.git.michal.simek@amd.com
2022-11-22xilinx: versal-net: Disable LMB for mini configurationMichal Simek
There is no reason to have LMB enabled on mini configuration because it is only consuming space that's why disable it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/47067c87b6b2e7600d3c2808e7d0aa6fe82aa1fe.1668612795.git.michal.simek@amd.com
2022-11-22xilinx: versal-net: Fix SYS_LOAD_ADDR to point to OCMMichal Simek
Versal NET mini U-Boot configuration is used for memory testing that's why load address can't be really placed in memory which doesn't need to work that's why move it to start of OCM which is the same memory which U-Boot is running from. Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22arm64: zynqmp: Disable watchdog by default for virt platformMichal Simek
Disable watchdog based on request in past that not all Linux rootfs have proper utilities ready to service it. Enable it if your rootfs have proper watchdog handling. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/62dfc08f32635abee42feab26aaa9efed52134c0.1665567328.git.michal.simek@amd.com
2022-11-22microblaze: Make extended addressing support defaultT Karthik Reddy
Axi qspi controller supports 32-bit & 24-bit addressing modes for micron, macronix & spansion flash parts. But for winbond flashes it only supports 24-bit addressing mode. Enable CONFIG_SPI_FLASH_BAR to use extended addressing mode to make 32-bit addressing mode work on all flashes. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f3864966c8ddd766a1702ad61b0e008a1f57462f.1665565423.git.michal.simek@amd.com
2022-11-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-21configs: mediatek: enable boot via extlinuxAlexandre Mergnat
Enable FAT and SYSBOOT to use extlinux boot script Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Julien STEPHAN <jstephan@baylibre.com>
2022-11-21Revert "imx: imx8: apalis: switch to binman"Stefano Babic
This reverts commit b8072ae848b73e89a73ba5b535324e4dc2793f37. Signed-off-by: Stefano Babic <sbabic@denx.de> Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-15riscv: enable reset via SBI on PolarFire Icicle KitHeinrich Schuchardt
HSS 2022.10 provides support for resetting the board. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2022-11-14Merge tag 'u-boot-imx-20221114' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2022.01 ----------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083 - Fix UART - moved to binman (MX8 boards) - Toradex: sync DTS with Linux - Gateworks: fixes - New boards : MSC SM2S iMX8MP
2022-11-10Convert CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_NONCACHED_MEMORY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NONCACHED_MEMORY To do this we introduce CONFIG_SYS_HAS_NONCACHED_MEMORY as a bool to gate if we are going to have noncached_... functions available and then continue to use CONFIG_SYS_NONCACHED_MEMORY to store the size of said cache. We make this new option depend on both the architectures which implement support and the drivers which make use of it. Cc: Tom Warren <twarren@nvidia.com> Cc: Mingming lee <mingming.lee@mediatek.com> Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MMC_MAX_BLK_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMC_MAX_BLK_COUNT Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10Convert CONFIG_SYS_MAX_NAND_DEVICE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAX_NAND_DEVICE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_INIT_RAM_LOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-09imx: imx8: apalis: switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-11-09imx: imx8x: colibri: switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-11-09imx: imx8qxp: deneb switch to binmanOliver Graute
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-09imx: imx8qxp: giedi switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-11-09imx: imx8qm: imx8qm_mek switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-11-09imx: imx8qxp: imx8qxp_mek switch to binmanOliver Graute
Switch to use binman pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-09imx: imx8qm: cgtqmx8: switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-09imx: imx8qm-rom7720: switch to binmanOliver Graute
Switch to use binman to pack images Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-11-09wandboard: Select DM_SERIALFabio Estevam
The conversion to DM_SERIAL is mandatory, so select this option. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-08configs: imx8mn_beacon: Enable SPL_DM_PMIC_BD71837Adam Ford
To properly operate the Nano with LPDDR4 at 1.6GHz, the voltage needs to be adjusted before DDR is initialized. Enable the PMIC in SPL to do this. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-08configs: imx8mn_beacon: Re-align memory to standard imx8mn settingsAdam Ford
The imx8mn_beacon board does not use the same memory map as the reference design from NXP or other imx8mn boards. As such, memory is more limited in SPL. Moving SPL_BSS_START_ADDR and SPL_STACK to default locations increases the amount of available meory for the SPL stack. Doing this allows the board to no longer define CONFIG_MALLOC_F_ADDR. Since SYS_LOAD_ADDR also does not align with other boards, move it too. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-11-08configs: imx8m{m,n,p}_venice: disable autoloadTim Harvey
disable network autoload Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08mx6cuboxi: migrate to DM_SERIALBaruch Siach
Add the needed DT overrides to enable UART in SPL. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-11-08ARM: imx: Add version variable to DHSOMMarek Vasut
Enable insertion of version variable into U-Boot environment on DHSOM, to make it possible to check U-Boot version e.g. in U-Boot scripts. Signed-off-by: Marek Vasut <marex@denx.de>
2022-11-08arm: imx8mp: Initial MSC SM2S iMX8MP supportMartyn Welch
Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction with the MSC SM2-MB-EP1 Mini-ITX Carrier Board. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Fabio Estevam <festevam@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 07:57:18 +0000