aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2021-01-13Merge tag 'u-boot-amlogic-20210112' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync amlogic GX & AXG DT to Linux 5.10 - Add new MESON_EE driver support for GXBB & AXG - Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards - add driver for TDO tl070wsh30 panel driver - meson: isolate loading of socinfo - Add soc_rev to environment - Enable G12A support for saradc - Add correct mmcdev on VIM3(L) & Odroid-N2(C4) - Read MAC from fuses for VIM3 & VIM3L boards
2021-01-12Merge tag 'ti-v2021.04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DM support for OMAP PWM backlight - USB host mode support for AM654 - Minor SPI fixes - Add support k2g ice board with 1GHz silicon - Fix GTC programming for K3 devices
2021-01-12Merge tag 'u-boot-atmel-2021.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2021.04 cycle This feature set includes the new board SAMA7G5 EK, the new evaluation kit for Microchip AT91 SAMA7G5 SoC . The current board support includes two configurations for booting from eMMC (SDMMC0), SD-Card (SDMMC1), and support for two Ethernet interfaces.
2021-01-12bus: ti: add minimal sysc interconnect target driverDario Binacchi
We can handle the sysc interconnect target module in a generic way for many TI SoCs. Initially let's just enable domain clocks before the children are probed. The code is loosely based on the drivers/bus/ti-sysc.c of the Linux kernel version 5.9-rc7. For DT binding details see: - Documentation/devicetree/bindings/bus/ti-sysc.txt Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-11sunxi: add PineCube boardIcenowy Zheng
PineCube is an IP camera development kit released by Pine64. It comes with the following compoents: - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps Ethernet port and FPC connectors for camera and daughter board. - An OV5640-based camera module which is connected to the parallel CSI bus of the mainboard. - A daughterboard with several buttons, a SD slot, some IR LEDs, a microphone and a speaker connector. As the device tree is synchronized in a previous commit, just add it to Makefile, create a new MAINTAINER item and provide a defconfig. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-11boards: amlogic: add Beelink GT-King Pro defconfigChristian Hewitt
Add a defconfig for the Beelink GT-King Pro Android STB, which is based on the Amlogic W400 reference design. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11boards: amlogic: add Beelink GT-King defconfigChristian Hewitt
Add a defconfig for the Beelink GT-King Android STB, which is based on the Amlogic W400 reference design. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11configs: khadas-vim3: enable ADC device supportMarek Szyprowski
Analog to Digital Converter device (Meson SARADC) will be used for probing 'Function' button state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [narmstrong: also updated khadas-vim3l_defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11boards: amlogic: add WeTek Core2 supportChristian Hewitt
Add a config for the WeTek Core2, largely based on the VIM2 config. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: added wetek-core2_defconfig to q200 MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11arm64: meson: add support for libretech-cc v2Jerome Brunet
Add support for the Amlogic based libretech cc version 2. As version 1, it is based on the s905x SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: Fixed libretech-cc.rst bullet points] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11configs: use the new MESON_EE_POWER_DOMAIN driver for Amlogic GXBB/GXL/GXM ↵Neil Armstrong
boards Linux 5.10-rc1 uses the new generic driver, so switch to it since GXBB and later is now supported. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-08xea: config: Disable CONFIG_SPL_OF_PLATDATA_PARENT on XEA (imx28)Lukasz Majewski
On the XEA board (imx28) one needs in the SPL support for GPIO, MMC and SPI. Two last ones are necessary for booting the device. The GPIO support allows deciding which medium will be used. For example the GPIO DTS node (gpio@0 at imx28.dtsi) has pinctrl parent (pinctrl@80018000) for which we don't need driver asigned for correct operation. In the spl/dts/dt-platdata.c the gpio@0 has index 4 and its parent - pinctrl@80018000 has index 5. In the bind_drivers_pass() function (at drivers/core/lists.c) call to device_bind_by_name() for `fsl_imx23_pinctrl` returns -2, which is expected. With current setup - when the SPL_OF_PLATDATA_PARENT=y The gpio@0 node with index 4 is skipped as its parent with 5 is not yet bound. It cannot be as we don't need and provide the driver for it. As a result the gpio@0 is never bound and we end up with bricked board in the SPL stage. When CONFIG_SPL_OF_PLATDATA_PARENT is NOT set, all entries from spl/dts/dt-platdata.c are scanned in ascending index order, so gpio@0 is properly initialized. For `fsl_imx_pinctrl` we simply check 10 times if the driver for is available (which is not) and exit. As a result the GPIOs are initialized and can be used in early SPL stage. This commit fixes XEA regression introduced with e41651fffda7da55f6. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-08xea: config: Use CONFIG_PREBOOT from KconfigLukasz Majewski
The usage of the preboot feature is now controlled via a separate Kconfig option - namely CONFIG_USE_PREBOOT. It must be enabled for preboot code executing commands now defined in CONFIG_PREBOOT (also moved to the Kconfig). After defining both CONFIG_USE_PREBOOT and CONFIG_PREBOOT in imx28_xea_defconfig the define of CONFIG_PREBOOT shall be removed from xea.h as it is redundant. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2021-01-08rockchip: pinebook-pro: default to SPI bus 1 for SPI-flashHugh Cole-Baker
SPI flash on this machine is located on bus 1, default to using bus 1 for SPI flash and stop aliasing it to bus 0. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Suggested-by: Simon Glass <sjg@chromium.org> Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob")
2021-01-07configs: sama7g5ek: add i2c and eepromEugen Hristev
Add drivers for flexcom, i2c and eeproms Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07configs: sama7g5: add mmc config for sdmmc0Eugen Hristev
Add new config for storing environment from sdmmc0. Also clean-up sama7g5ek_emmc1 to point to the proper mmc device. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07configs: sama7g5ek: enable CCFClaudiu Beznea
Enable CCF for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5ek: enable support for KSZ9131Claudiu Beznea
Enable support for KSZ9131. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5ek: enable mii commandClaudiu Beznea
Enable mii command as ethernet's PHY specific programming is based on it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07ARM: dts: sama7g5: enable autobootClaudiu Beznea
Enable autoboot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5: use PIT64BClaudiu Beznea
Use PIT64B driver. ATMEL_PIT is not available for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5: enable CONFIG_CPUClaudiu Beznea
Enable CONFIG_CPU. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5ek: enable pll driverClaudiu Beznea
Enable PLL driver for SAMA7G5. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07configs: sama7g5ek: set malloc pool to 68KClaudiu Beznea
Set malloc pool to 68K for sama7g5ek. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07board: atmel: sama7g5ek: add initial support for sama7g5ekEugen Hristev
Add initial support for sama7g5 evaluation kit board. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07arm: at91: configs: Enable CONFIG_SYS_NAND_USE_FLASH_BBT on all boardsNicolas Ferre
As highlighted by Stefan in the commit e074d0f79b2e ("arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT") it's important to use BBT when Linux enables it. We use it for a long time on all our boards. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com> Acked-by: Alexander Dahl <ada@thorsis.com>
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-26arm: dart6ul: read and print SoM info from eeprom on startupMarc Ferland
The dart6ul has an i2c eeprom at 0x50 which contains, among other things, the manufacturing/revision/options info of the SoM. This patch replaces the current checkboard() implementation with a more exhaustive one based on the content of the eeprom. Since this code uses the new driver model, some changes were also required in the DTS to make the nodes related to i2c available before relocation. This code was inspired from the supported u-boot code from Variscite which can be found here: https://github.com/varigit/uboot-imx/tree/imx_v2018.03_4.14.78_1.0.0_ga_var02 New output example: Board: PN: VSM-6UL-705B, Assy: AS1812142257, Date: 2019 Feb 17 Storage: eMMC, Wifi: yes, DDR: 1024 MiB, Rev: 2.4G Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26imx8mp_evk: Increase CONFIG_SYS_MALLOC_F_LENFabio Estevam
When booting imx8mp-evk the following allocation error message is seen: U-Boot 2021.01-rc3-00200-ge668bec96a5f (Dec 21 2020 - 14:36:42 -0300) alloc space exhausted Fix it by increasing CONFIG_SYS_MALLOC_F_LEN to 0x10000 like it is done on other i.MX8MM/8MN boards. Reported-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26configs: imx8m: enable eMMC HS400ES and SD UHS mode on EVKAndrey Zhizhikin
i.MX8M series includes support for high speed modes in uSDHC controllers. Turn on corresponding configuration options for EVK boards, which would enable high speed modes to be included in U-Boot. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-12-26imx8mm_beacon: Enable HS400 on MMC controllerAdam Ford
The i.MX8MM is capable of HS400. Enable it in both U-Boot and SPL for faster throughput. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-12-22configs: sandbox: activate DEBUG_UARTPatrick Delaunay
Add CONFIG_DEBUG_UART=y for all sandbox defconfig as it is already done in sandbox_defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-18dh_imx6: Switch to full DM-awareJagan Teki
Enable DM_SPI/DM_SPI_FLASH with a related config option. Build fine, but not tested. Cc: Ludwig Zenz <lzenz@dh-electronics.de> Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18cm_fx6: Switch to full DM-awareJagan Teki
Enable DM_SPI/DM_SPI_FLASH with a related config option. Build fine, but not tested. Cc: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASHJagan Teki
Enable DM_SPI/DM_SPI_FLASH with associated config options. Build fine, but not tested. Cc: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-16configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-16x86: edison: Switch to DM_USB_GADGETAndy Shevchenko
DM is the modern default approach for the drivers in U-Boot. It also allows to configure code via Device Tree. Move Intel Edison to use DM_USB_GADGET and drop hard coded values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-16x86: edison: Drop unneeded DM_PCI_COMPATAndy Shevchenko
None of the driver for Edison is using DM_PCI_COMPAT, hence drop it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-10configs: lx2162aqds: Enable gpio driver in defconfigHui Song
make lx2162aqds platform to enable gpio driver. Signed-off-by: Hui Song <hui.song_1@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162aqds: enable eMMC HS400 mode supportYangbo Lu
Enable eMMC HS400 mode support on LX2162AQDS. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_RYangbo Lu
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card identification and configuration. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162a: Enable OPTEE supportRuchika Gupta
Enable support to compile OPTEE driver, access AVB TA and RPMB API's access via RPC from OPTEE for lx2162 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10armv8: lx2162aqds: Add support for LX2162AQDS platformMeenakshi Aggarwal
This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to KconfigMeenakshi Aggarwal
Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can be controlled via defconfig files. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4Wasim Khan
LX2160A-Rev1 uses PCIe layerscape Gen4 controller. Enable CONFIG_PCIE_LAYERSCAPE_GEN4 for lx2160a. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-12-07configs: migrate CONFIG_IMX_THERMAL to defconfigsTom Rini
Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06verdin-imx8mm: spl: switch to pca9450 pmicMax Krummenacher
V1.1A HW switched the PMIC from BD71837 to PCA9450. - Disable combined DVS in PCA9450_BUCK123_DVS. - Increase DDR Voltage to 0.95V as we use a 1.5GHz RAM. - Configure WDOG_B behaviour. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 17:28:17 +0000