aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-08-10configs: omap3_logic: Disable NAND ID during SPLAdam Ford
For these boards, the GPMC timings are more determined by processor speed/type than the NAND/PoP memory. This code is never invoked, so disable the config option, so it doesn't take the time to compile it in. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10omap3_logic: Fix CONS_INDEXAdam Ford
The console index for SPL should be 1 not 3 in order to see text during SPL. Fixes: 6f6b7cfa89e5 ("Convert all of CONFIG_CONS_INDEX to Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10stm32mp1: add gpio led supportPatrick Delaunay
This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-08Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2018-08-08bcm968380gerg: add initial supportPhilippe Reynes
This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: au1x00: Remove support for these SoCsTom Rini
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an apparent clone of the dbau1x00 platform. As pb1x00 had no listed maintainer I am assuming that it is also orphaned. Remove this platform and then remove the unused SoC support. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08mips: dbau1x00: Remove this boardTom Rini
This platform has been marked as orphan since June of 2016 and should have been removed some time ago. Do so now. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-07Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-08-07Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.09-rc2 xilinx: - Add support for zybo z7 and ultra96 - Tune zynq and zynqmp mini configurations - Move SYS_MALLOC_LEN to Kconfig fdt - make static funcs gpio: - Fix soft gpio driver - Fix Zynq gpio driver by using platdata microblaze: - Fix Kconfig entry spi - Move ISSI to Kconfig
2018-08-07ARM: kirkwood: add SBx81LIFXCAT boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07configs: kirkwood: Move RTC_MV to DM and KconfigChris Packham
Now that there is DM support in the RTC_MV driver update board configs to use it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07configs: kirkwood: ds109: switch to DM_I2CChris Packham
Enable DM_I2C and I2C_MVTSWI for the ds109 board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06mvebu: select boot device at SoC levelBaruch Siach
Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: add support for the zybo z7 boardLuis Araneda
The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynqSiva Durga Prasad Paladugu
This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm64: zynqmp: Enable soft gpio driver for zcu102 and zcu100Michal Simek
Enable soft gpio driver for zcu102 and zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06spi: Kconfig: Create ISSI Kconfig entryMichal Simek
Add ISSI to Kconfig to make it selectable via menuconfig. Also convert all current platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06ARM: Odroid XU3: Enable driver model support for MMC (DM_MMC)Lukasz Majewski
This commit enables support for DW_MMC running with driver model. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06ARM: Odroid XU3: config: Disable SDHCI support in the Odroid XU3Lukasz Majewski
The Exynos5422 is solely using DW MMC IP block to support eMMC/SD devices, hence the SDHCI code doesn't need to be compiled it. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-08-03configs: stm32f469-disco: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03configs: stm32f746-disco: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-03configs: stm32f429-evaluation: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03configs: stm32mp15: enable ADCFabrice Gasnier
Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: enable SATA on Banana Pi M2 BerrySimon Baatz
Banana Pi M2 Ultra and M2 Berry are very similar boards. SATA can be enabled exactly the same as for M2 Ultra introduced in commit daa8b75a5527 ("sunxi: enable SATA on Banana Pi M2 Ultra"). Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-31AXS10x: add spi flash supportEugeniy Paltsev
AXS10x boards have n25q512 spi flash IC, so add corresponding nodes to device tree and enaple corresponding options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-28configs: omap3_logic: Remove USB Storage and enable CONFIG_BLKAdam Ford
With the pending requirement for CONFIG_BLK, this patch removes the USB_STORAGE option which assumes that DM_USB is enabled, but isn't yet available for the omap2340 musb glue among other issues. Once the USB issues are resolved, a future patch can enable them again. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-28sandbox: compile both TPM stack versions and driversMiquel Raynal
Now that TPMv1 and TPMv2 can be compiled at the same time, let's compile them both with Sandbox as well as both drivers (and, it is already implied in Kconfig: both commands). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26armv8: ls1046ardb: Add falcon mode for for QSPI bootYork Sun
A new defconfig is introduced to support SPL boot from QSPI NOR flash. This is to support falcon mode for faster booting into Linux. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26arm64: ls1012a: enable DM support for sataYuantian Tang
Enable related configs to support sata DM feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1046ardb: ls1046aqds: Move SPL macros to defconfigYork Sun
Instead of defining Kconfig macros in header file, move them to defconfig files. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2088ardb: Move CONFIG_SPI_FLASH, CONFIG_SPI_FLASH_SPANSION to defconfigAshish Kumar
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig. Also disable disable 4K erase size option. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26configs: Disable 4k erase sector size for spansion "s25fs512s" flashAshish Kumar
4K erase size is used only in case of hydrid mode which is not supported on any NXP platform with flash "s25fs512s". Supported mode is uniform sector, with erase size 256kiB. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1043ARBD: Fix SD Boot issue with PPAVinitha V Pillai
CONFIG_SPL_FSL_LS_PPA is needed only in case of falcon boot Support for this is not present in PPA currently, so removing the default option from defconfig Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-24Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-07-25ARM: uniphier: enable MTD partition and UBIMasahiro Yamada
Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to use UBI on NAND devices. Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because enabling UBI would increase 170KB, which would be memory footprint problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-24configs: am3517-evm: Setup NAND bootingAdam Ford
The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-24omap3: beagle: re-enable EFI support after the following commit removed it ↵Guillaume GARDET
by mistake: commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-07-23ARM: configs: omap3_logic: remove Legacy OMAP3 USB driverAdam Ford
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23Convert CONFIG_DA8XX_GPIO to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DA8XX_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23m68k: m5253evbe: Remove this boardTom Rini
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in ↵Ludwig Zenz
Kconfig In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDPAdam Ford
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23pico-imx7d: Add new pico-pi configOtavio Salvador
The new config skips the boot menu which asks which board is in use. This is useful to allow direct booting of image without user iteration. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Enable auxiliary code supportOtavio Salvador
This enables the "bootaux" command so a firmware can be loaded inside the M4 MCU. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 10:14:40 +0000