aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2021-07-07m68k: Remove M5485 boardsTom Rini
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is all of the CONFIG_M548x platforms as well, remove that code. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Drop MPC837XERDB_SLAVE for nowTom Rini
Drop the MPC837XERDB_SLAVE configuration. Cc: Sinan Akman <sinan@writeme.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge tag 'dm-pull-6jul21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
various minor sandbox improvements
2021-07-06Merge branch '2021-07-06-platform-updates'Tom Rini
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06lpc32xx: ea-lpc3250devkitv2: enable i2c (DM)Trevor Woerner
Enable a DMed i2c driver for the ea-lpc3250devkitv2 board. Include some sample commands/output for testing. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06Kconfig: convert CONFIG_SYS_I2C_LPC32XXTrevor Woerner
Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06arm: lpc32xx: add EA LPC3250 DevKitv2 board supportTrevor Woerner
Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: Kconfig: switch to CONFIG_CONS_INDEXTrevor Woerner
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06configs: synquacer: Enable EFI capsule update supportMasami Hiramatsu
Enable EFI capsule update support. With the EFI capsule update, you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are usually combined as a FIP binary, but if the binary is bigger than 480KB, you have to modify FIP header, split the OP-TEE and stores the OP-TEE binary in the different place. This configuration supports both cases. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06ARM: integrator: Drop PCI supportLinus Walleij
We didn't convert the Integrator to use DM for PCI in time, and we don't use it either so let's just drop PCI support from the Integrator. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-07-06mpc8379erdb: enable DM_USB DM_PCI DM_ETHSinan Akman
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-07-06sandbox: cros-ec: Add tests for the Chromium OS EC PWM driverAlper Nebi Yasak
This patch adds a limited pulse-width modulator to sandbox's Chromium OS Embedded Controller emulation. The emulated PWM device supports multiple channels but can only set a duty cycle for each, as the actual EC doesn't expose any functionality or information other than that. Though the EC supports specifying the PWM channel by its type (e.g. display backlight, keyboard backlight), this is not implemented in the emulation as nothing in U-Boot uses this type specification. This emulated PWM device is then used to test the Chromium OS PWM driver in sandbox. Adding the required device node to the sandbox test device-tree unfortunately makes it the first PWM device, so this also touches some other tests to make sure they still use the sandbox PWM. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06board: sifive: support spl multi-dtb on unmatched boardZong Li
There are two revisions of unmatched board with different DDR timing, we'd like to support multi-dtb mechanism in SPL, then it selects the right DTB at runtime according to PCB revision in I2C EEPROM. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06board: riscv: add openpiton-riscv64 SoC supportTianrui Wei
This patch adds openpiton-riscv64 SOC support. In particular, this board supports a standard bootflow through zsbl->u-boot SPL-> opensbi->u-boot proper->Linux. There are separate defconfigs for building u-boot SPL and u-boot proper Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06riscv: sifive: Set default fdtfile namesDimitri John Ledkov
Set default fdtfile names for unleashed and unmatched boards, as used in the upstream Linux kernel. This allows sysboot command to find and load appropriate dtb for the matching kernel from universal stock Ubuntu RISC-V rootfs images based on fdtdir setting in extlinux.conf. Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> cc: Paul Walmsley <paul.walmsley@sifive.com> cc: Palmer Dabbelt <palmer@dabbelt.com> cc: Anup Patel <anup.patel@wdc.com> cc: Atish Patra <atish.patra@wdc.com> cc: Pragnesh Patel <pragnesh.patel@sifive.com> cc: Green Wan <green.wan@sifive.com>
2021-07-05Merge branch 'next'Tom Rini
2021-07-02Merge tag 'u-boot-amlogic-20210703' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - configs: libretech: set SPI mode to 0 to fix SPI NOR Flash probe
2021-07-02configs: libretech: set SPI mode to 0Da Xue
Kconfig defaults to mode 3 if CONFIG_SF_DEFAULT_MODE is not set. It becomes an issue since meson_spifc does not support SPI_CPHA. Needed after commit e2e95e5e25 ("spi: Update speed/mode on change"). Fixes: e2e95e5e25 ("spi: Update speed/mode on change") Signed-off-by:Da Xue <da@libre.computer> [narmstrong: reformated commit reference & added Fixes tag] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-02efi_loader: Force a single FMP instance per hardware storeIlias Apalodimas
Chapter 23 of the EFI spec (rev 2.9) says: "A specific updatable hardware firmware store must be represented by exactly one FMP instance". This is not the case for us, since both of our FMP protocols can be installed at the same time because they are controlled by a single 'dfu_alt_info' env variable. So make the config options depend on each other and allow the user to install one of them at any given time. If we fix the meta-data provided by the 'dfu_alt_info' in the future, to hint about the capsule type (fit or raw) we can revise this and enable both FMPs to be installed, as long as they target different firmware hardware stores Note that we are not using a Kconfig 'choice' on purpose, since we want to allow both of those to be installed and tested in sandbox Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-01Merge tag 'xilinx-for-v2021.10' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.10 clk: - Add driver for Xilinx Clocking Wizard IP fdt: - Also record architecture in /fit-images net: - Fix plat/priv data handling in axi emac - Add support for 10G/25G speeds pca953x: - Add missing dependency on i2c serial: - Fix dependencies for DEBUG uart for pl010/pl011 - Add setconfig option for cadence serial driver watchdog: - Add cadence wdt expire now function zynq: - Update DT bindings to reflect the latest state and descriptions zynqmp: - Update DT bindings to reflect the latest state and descriptions - SPL: Add support for ECC DRAM initialization - Fix R5 core 1 handling logic - Enable firmware driver for mini configurations - Enable secure boot, regulators, wdt - Add support xck devices and 67dr - Add psu init for sm/smk-k26 SOMs - Add handling for MMC seq number via mmc_get_env_dev() - Handle reserved memory locations - Add support for u-boot.itb generation for secure OS - Handle BL32 handoffs for secure OS - Add support for 64bit addresses for u-boot.its generation - Change eeprom handling via nvmem aliases
2021-07-01arm64: zynqmp: Enable WDT commandMichal Simek
Enable watchdog command to be able to work with watchdogs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-28Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next - V3U Falcon board support
2021-06-28Merge tag 'v2021.07-rc5' into nextTom Rini
Prepare v2021.07-rc5 # gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # configs/am64x_evm_r5_defconfig
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-24ARM: rmobile: Add basic PSCI support for R8A779A0 V3U FalconHai Pham
Enable basic PSCI support for R8A779A0 V3U Falcon Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-06-24ARM: renesas: Add R8A779A0 V3U Falcon board codeHai Pham
Add board code for the R8A779A0 V3U Falcon board. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> -- Marek: - various small rebase fixes and clean ups
2021-06-23zynqmp: Enable regulatorsMichal Simek
Enable command and fixed regulators. XDP platform is using them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Handle MMC seq number based on boot deviceMichal Simek
K26 has EMMC and SD and default 0 is not working when system is booting out of SD which is controller 1. Add controller autodetection via mmc_get_env_dev(). The same code is used for distro_boot selection done in board_late_init(). bootseq variable can't be reused because this is called so late. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Enable EFI secure bootMichal Simek
Enabling EFI secure boot which is required for EBBR specification. Enabling this will fix "RT.SetVariable - Create one Time Base Auth Variable, the expect return status should be EFI_SUCCESS" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: xilinx: Set CONFIG_ZYNQMP_FIRMWARE config for mini emmcT Karthik Reddy
CONFIG_ZYNQMP_FIRMWARE enables zynqmp firmware driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2021-06-21imx8mm: configs: enable distro default featuresAndrey Zhizhikin
imx8mm ekv has been switched to use distro boot commands, but had no correct options enabled to support sysboot. According to the README.distro, sysboot is consindered to be a recommended way of using distro boot commands, it required default distro features to be enabled instead of only those that are relevant to the boot script. Replace the boot script specific options in the config to a default distro option. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Fixes: 2df8930bf9 ("imx8mm: configs: add support for distro boot commands") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-21imx8mp: configs: enable distro default featuresAndrey Zhizhikin
imx8mp ekv has been switched to use distro boot commands, but had no correct options enabled to support sysboot. According to the README.distro, sysboot is consindered to be a recommended way of using distro boot commands, it required default distro features to be enabled instead of only those that are relevant to the boot script. Replace the boot script specific options in the config to a default distro option. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Fixes: 9b162b1d1f ("imx8mp: configs: add support for distro boot commands") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-18configs: rockchip: rk3399: Khadas Edge add USB OHCIArtem Lapkin
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-17Merge tag 'u-boot-atmel-2021.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for the 2021.10 cycle: This feature set converts the boards pm9261 and pm9263 Ethernet support to DM; enables hash command for all SAM boards; fixes the NAND pmecc bit-flips correction; adds Falcon boot for sama5d3_xplained board; and other minor adjustments.
2021-06-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards - powerpc: Update Maintainers for some boards.
2021-06-17board: freescale: t208xrdb: add a config option for rev D dts fixupsCamelia Groza
Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17board/km: add support for expu1 design based on nxpAleksandar Gerasimovski
The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: seli8: set envsize to 0x4000Aleksandar Gerasimovski
During the mainlining of the board this was by mistake set to sector size. Our user space env scripts are expecting envsize of 0x4000, and setting this differently will break our cross-platform compatibility. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: ls2088aqds: fix synchronous exceptionBiwen Li
IFC NOR flash base address of ls2088a is 0x580000000, and offset of env crc is 0x500000, so fix the macro CONFIG_ENV_ADDR to fix synchronous exception(access illegal address) Fixes: 59071804c1 ("configs: ls2080a: Correct ENV_ADDR value") Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17configs: ls1088a: Enable CONFIG_SYS_RELOC_ENV_ADDRKuldeep Singh
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17test: Add K210 PLL tests to sandbox defconfigsSean Anderson
This adds the unit test for the K210 PLL to the sandbox defconfigs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-17k210: Don't imply CCFSean Anderson
Now that the k210 clock driver does not depend on CCF, we should no longer imply it (and probably should not have in the first place). We can also reduce the pre-relocation malloc arena back to something sensible. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-17k210: dts: Set PLL1 to the same rate as PLL0Sean Anderson
Linux has had some stability issues when using AISRAM with a different frequency from SRAM. Mirror their change here now that we relocate into AISRAM. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-16Merge tag 'u-boot-imx-20210616' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-16configs: ls1046afrwy: Add secure boot configManish Tomar
Add required CONFIG_NXP_ESBC for ls1046afrwy to enable ESBC Chain of Trust. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-14configs: sam boards: add hash commandEugen Hristev
Add hash and hash verify commands. These would be useful for verifying copied data. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-06-11Merge tag 'xilinx-for-v2021.07-rc5' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc5 zynqmp: - Fix ANALOG_BUS value after powerup - Disable EFI_CAPSULE_ON_DISK_EARLY zynqmp-gqspi: - Fix write issue
2021-06-11configs: j7200_evm_r5: Enable raw access power management featuresDave Gerlach
Sysfw is not going to provide access to power management features in the new architecture, so SPL must implement these itself. Enable all the raw register access based clock + power domain drivers. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 15:40:32 +0000