aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2022-07-07Convert CONFIG_SYS_FSL_CPC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CPC CONFIG_SYS_CPC_REINIT_F Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOK3E_HV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOK3E_HV Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_PALMAS_POWER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PALMAS_POWER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_UNIFY_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_UNIFY_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_USB_OHCI_NEW et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07spl: Ensure all SPL symbols in Kconfig have some SPL dependencyTom Rini
Tighten up symbol dependencies in a number of places. Ensure that a SPL specific option has at least a direct dependency on SPL. In places where it's clear that we depend on something more specific, use that dependency instead. This means in a very small number of places we can drop redundant dependencies. Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06ast2600: Configure u-boot-with-spl.bin targetJoel Stanley
The normal way of loading u-boot is as a FIT, so configure u-boot.img as the SPL playload. The u-boot-with-spl.bin target will add padding according to CONFIG_SPL_MAX_SIZE which defaults to 64KB on the AST2600. With this the following simple steps can be used to build and boot a system: make u-boot-with-spl.bin truncate -s 64M u-boot-with-spl.bin qemu-system-arm -nographic -M ast2600-evb \ -drive file=u-boot-with-spl.bin,if=mtd,format=raw Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/ast2600: Disable hash hardware accelJoel Stanley
The HACE driver lacks support for all the hash types, causing boot to fail with the default FIT configuration which uses CRC32. Additionally the Qemu model or the u-boot driver is unable to correctly compute the SHA256 hash used in a FIT. Disable HACE by default while the above issues are worked out to enable boot testing in Qemu. Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/ast2600: Make position independentJoel Stanley
Allows loading one u-boot from another. Useful for testing on hardware. Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/ast2600: Enable CRC32Joel Stanley
Useful for testing images with the default hash type. Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/ast2600: Enable eMMC related boot optionsJoel Stanley
Allow booting zImage from ext4 devices with DOS or UEFI partition layouts. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/aspeed: Enable EEPROM optionsJoel Stanley
To allow testing of the I2C driver, enable the eprom command and the misc driver. Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06config/ast2600: Enable I2C driverJoel Stanley
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06configs: am62x_evm_r5: Add CONFIG_NR_DRAM_BANKS as done in a53 defconfigGeorgi Vlaev
Add CONFIG_NR_DRAM_BANKS from am62x_evm_a53_defconfig as this is needed to calculate the size of DDR that is available. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_KIRKWOOD_PCIE_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KIRKWOOD_EGIGA_INIT CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KM_DISABLE_PCIE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_MSC01 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_MSC01 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SH7751_PCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SH7751_PCI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_GT64120 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_GT64120 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE_IMX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_ESDHC_DETECT_QUIRK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ESDHC_DETECT_QUIRK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05nxp: Make board/freescale/common/Kconfig safe to include once in arch/KconfigTom Rini
The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_GADGET_DWC2_OTG_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USE_ONENAND_BOARD_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_ONENAND_BOARD_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SAMSUNG_ONENAND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SAMSUNG_ONENAND Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05Rename CONFIG_PWM to CONFIG_PWM_S5P and move to KconfigTom Rini
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to Kconfig. Given the usage of CONFIG_PWM_NX, we have that select this new symbol. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-30Merge tag 'versal-qspi-for-v2022.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Versal QSPI/OSPI changes for v2022.10 - Add new flash types - Add cadence ospi driver for Xilinx Versal
2022-06-29Merge branch '2022-06-28-Kconfig-migrations' into nextTom Rini
- Convert a large number of CONFIG symbols to Kconfig. Of note is a large chunk of USB symbols (and dead code removal), ensuring all SPL/TPL/VPL symbols have an appropriate dependency, largely (but not entirely) removing the testing of CONFIG_SPL_BUILD in board headers, and allowing CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS to co-exist as this facilities migration of many platforms.
2022-06-29arm64: versal: Add versal specific cadence ospi driverT Karthik Reddy
Add support for cadence ospi driver for Versal platform. This driver provides support for DMA read operation which utilizes cadence qspi driver. If "cdns,is-dma" DT property is specified use dma for read operation from cadence_qspi driver. As cadence_qspi_apb_dma_read() is defined in cadence_ospi_versal driver add a weak function defination in cadence_qspi driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-3-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-28Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environmentTom Rini
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_RANGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28mx6memcal: Remove SPL_USB_HOSTTom Rini
As this particular platform is intended to be loaded and run a specific set of routines in SPL, we do not need the ability to further use the USB as a host device in SPL. Disable this support. Cc: Eric Nelson <eric@nelint.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Eric Nelson <eric@nelint.com>
2022-06-28Convert CONFIG_FPGA_STRATIX_V to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FPGA_STRATIX_V Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_MIN_ENTRIES et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_MIN_ENTRIES CONFIG_ENV_MAX_ENTRIES Cc: Michal Simek <michal.simek@amd.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28video: Migrate exynos display options to KconfigTom Rini
Following how it's done for the majority of drivers, add a new VIDEO_EXYNOS option and Kconfig file under drivers/video/exynos and list the current options there. Cc: Anatolij Gustschin <agust@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28arm: samsung: Migrate a number of symbols to KconfigTom Rini
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than CONFIG_EXYNOS[45] - In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX - Migrate specific SoC CONFIG values to Kconfig - Use CONFIG_TARGET_x rather than CONFIG_x - Migrate other CONFIG_EXYNOS_x symbols to Kconfig - Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE - Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest of U-Boot usage. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 02:49:22 +0000