| Age | Commit message (Collapse) | Author |
|---|
|
In order to make it easier to move on to dropping common.h from code
directly, remove common.h inclusion from the rest of the header file
which had been including it.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Current code allows up to 3 MBR partitions without extended one.
If more than 3 partitions are required, then extended partition(s)
must be used.
This commit allows up to 4 primary MBR partitions without the
need for extended partition.
Add mbr test unit. In order to run the test manually, mmc6.img file
of size 12 MiB or greater is required in the same directory as u-boot.
Test also runs automatically via ./test/py/test.py tool.
Running mbr test is only supported in sandbox mode.
Signed-off-by: Alex Gendin <agendin@matrox.com>
[ And due to some further changes for testing ]
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Prepare a rkmtd UCLASS in use for writing Rockchip boot blocks
in combination with existing userspace tools and rockusb command.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Print out the blkmap device type when showing partition header for
a blkmap device.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
It's helpful to output the device uclass id for unknown devices
during the debugging process.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rename disk_partition_type_uuid to disk_partition_type_guid.
Provide function descriptions for the getter and setter.
Fixes: bcd645428c34 ("part: Add accessors for struct disk_partition type_uuid")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add a little more debugging for the initial signature check. Drop the
pointless check for NULL. Also set a log category while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.
Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.
Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Some internal functions could do with a few comments, to explain what they
do. Add these, to make the code easier to follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the mac code to
just use 'desc'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the iso code to
just use 'desc'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the efi code to
just use 'desc'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the dos code to
just use 'desc'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the amiga code to
just use 'desc'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the partition code to
just use 'desc', as is done with driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Block devices with 4k sectors imply the MBR sectors are also 4k instead
of regular 512B. Avoid hard-coding the 512B sector size and isntead read
the current block device sector size from it, and if the sector size is
larger than 512B, use the block device sector size.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Move part_create_block_devices() to blk uclass and unexpose
the function. This can now be internal to the block uclass.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The behavior of the part_blk_*() functions is now identical
to disk_blk_*() functions, switch the former to the later.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Check whether access is out of bounds of the partition and
return an error. This way there is no danger of esp. write
or erase outside of the confines of partition.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Convert the read/write/erase offset from one within a partition
to one within a block device, to correctly access the data on
the block device for both write and erase operations.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
These two functions are basically identical, just call the blk_*()
functions from disk_blk_*() functions. The only difference is that
the disk_blk_*() functions have to use parent block device as the
udevice implementing block device operations.
Add documentation on what those functions really do. The documentation
is not wrong even though it likely does look that way. The write/erase
functions really do not take into account the partition offset. This
will be fixed in the next patch.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The disk_blk_read() can be simplified using blk_read(), the only
things which needs to be handled are the read offset based on the
partition properties, and the block device ops which are coming
from the parent udevice, not the partition udevice.
The later is currently not implemented correctly as far as I can
tell, since the current code extracts block device descriptor from
the parent udevice which is OK, but extracts block device operations
from the partition udevice, which does not seem OK.
Switching to the blk_read() fixes that too.
The dev_get_blk() usage is simplified using UCLASS_PARTITION check.
Add non-confusing documentation what this really does.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
if (device_get_uclass_id(dev) == UCLASS_PARTITION) is always
true, because this disk_blk_read() function calls dev_get_blk()
above and checks its return value for non-NULL. The dev_get_blk()
performs the same device_get_uclass_id(dev) check and returns NULL
if not UCLASS_PARTITION. Drop the duplicate check.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
In SPL environment variables may not be enabled.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Since commit 56670d6fb83f ("disk: part: use common api to lookup part
driver") part_get_info_by_name_type() ignores the part_type parameter
used to restrict the partition table type.
omap_mmc_get_part_size() and part_get_info_by_name() are the only
consumers.
omap_mmc_get_part_size() calls with part_type = PART_TYPE_EFI because at
the time of implementation a speed up could be gained by passing the
partition table type. After 5 years experience without this restriction
it looks safe to keep it that way.
part_get_info_by_name() uses PART_TYPE_ALL.
Move the logic of part_get_info_by_name_type() to part_get_info_by_name()
and replace the function in omap_mmc_get_part_size().
Fixes: 56670d6fb83f ("disk: part: use common api to lookup part driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.
No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.
Fixes: a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for distro and bootstd")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.
Provide a way to manually set the partition-table type, avoiding the
auto-detection process.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Add a frontend for the blkmap subsystem. In addition to the common
block device operations, this allows users to create and destroy
devices, and map in memory and slices of other block devices.
With that we support two primary use-cases:
- Being able to "distro boot" from a RAM disk. I.e., from an image
where the kernel is stored in /boot of some filesystem supported
by U-Boot.
- Accessing filesystems not located on exact partition boundaries,
e.g. when a filesystem image is wrapped in an FIT image and stored
in a disk partition.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Per Takahiro Akashi this is not an equivalent rework, so revert it.
This reverts commit d87bdb82eae66512c222fd93280acaf4dd1cd4be.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Reduce the duplicated code slightly by using a helper function to handle
the common code.
This reduces the code size very slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is selected by PARTITION_UUIDS which has a separate option for SPL.
Add an SPL option for LIB_UUID also, so that we can keep them consistent.
Also add one for PARTITION_TYPE_GUID to avoid a build error in part_efi.c
which wants to call a uuid function in SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_PARTITION_TYPE_GUID defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_CMD_MBR defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
If a disk has a bootable partition we are expected to use it to locate the
boot files. Add a function to find it.
To test this, update mmc1 to have two paritions, fixing up other tests
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
blk_get_device_part_str() should always initialize all info fields
including sys_ind. As a side effect the code is simplified.
Replace '(0 ==' by '(!' to conform with Linux coding style.
Fixes: 4d907025d6a5 ("sandbox: restore ability to access host fs through standard commands")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
|
|
Update the sandbox implementation to use UCLASS_HOST and adjust all
the pieces to continue to work:
- Update the 'host' command to use the new API
- Replace various uses of UCLASS_ROOT with UCLASS_HOST
- Disable test_eficonfig since it doesn't work (this should have a unit
test to allow this to be debugged)
- Update the blk test to use the new API
- Drop the old header file
Unfortunately it does not seem to be possible to split this change up
further.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The use of 'block_dev' in this context is confusing, since it is not a
pointer to a device, just to some information about it. Rename this to
'desc', as is more commonly used, since it is a block descriptor.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glplk@gmx.de>
|
|
Use the uclass type as the first part of the function name, to be
consistent with the methods in other block drivers.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is monstrously verbose when something goes wrong. It should work by
recording the problem and reporting it (once) at the command level. At
present it sometimes outputs hundreds of lines of CRC mismatches.
For now, just silence it all.
GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712
find_valid_gpt: *** ERROR: Invalid GPT ***
find_valid_gpt: *** Using Backup GPT ***
GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712
find_valid_gpt: *** ERROR: Invalid GPT ***
find_valid_gpt: *** Using Backup GPT ***
...
While we are error, remove the '*** ERROR: ' text as it is already clear
that this is unexpected
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
When looking for a filesystem on a partition we should do so quietly. At
present if the filesystem is very small (e.g. 512 bytes) we get a host of
messages.
Update these to only show when debugging.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use the word 'uclass' instead of 'if_type' to complete the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This is currently missing. Add it.
Fix the code style for the function while we are here.
Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.
Drop the if_type values and use the uclass ones instead.
Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not really needed since it does the same things as MMC. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not really needed since it does the same things as IDE. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This doesn't seem to be used for anything and it isn't clear what it is.
It dates from the first U-Boot commit.
Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
