aboutsummaryrefslogtreecommitdiff
path: root/doc/board
AgeCommit message (Collapse)Author
2021-10-07ARM: amlogic: add Banana Pi M5Neil Armstrong
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: meson: add Beelink GS-King X boardNeil Armstrong
The Beelink GS-King X is a variant of the GS King boards but with an internal USB to SATA bridge and advanced audio features. [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07doc: boards: amlogic: update for Odroid HC4Neil Armstrong
Add documentation bits for the Odroid-HC4. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-09-27doc: ti: am335x_evm: Minor general updatesTom Rini
- At this point there are a large number of Beaglebone boards, refer to them as a family rather than a growing list. - Reword customization as we're largely Kconfig-oriented now. - Remove the NOR section as the relevant defconfigs have long been removed and the general support was not updated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27doc: ti: Convert am335x_evm README to rSTTom Rini
Convert the existing documentation to rST, keeping to just making formatting changes to start with. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-03Revert most of the series for adding vexpress_aemv8r supportTom Rini
Per a request from Andre Przywara and agreed with by Peter Hoyes, the vexpress aemv8r support wasn't quite ready to be merged, but the discussion had moved off list. We should keep the first patch in the series for now, but revert the rest. This reverts the following commits: e0bd6f31ce41 doc: Add documentation for the Arm vexpress board configs 30e5a449e8c7 arm: Use armv8_switch_to_el1 env to switch to EL1 b53bbca63bf4 vexpress64: Add BASER_FVP vexpress board variant 2f5b7b74903f armv8: Add ARMv8 MPU configuration logic 37a757e227cc armv8: Ensure EL1&0 VMSA is enabled Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-02doc: Add documentation for the Arm vexpress board configsPeter Hoyes
Create a new documentation section for Arm Ltd boards with a sub-page for the vexpress board (FVP-A, FVP-R and Juno). Document how the armv8_switch_to_el1 environment variable can be used to switch between booting from S-EL2/S-EL1 at runtime on the BASER_FVP. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-01board: stemmy: Update documentationStephan Gerhold
Over the time, the "stemmy" U-Boot board was tested on several other Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the documentation to reStructuredText at doc/board/ste/stemmy.rst and make the device list complete. Also note that the board now boots into USB Fastboot instead of just ending up at the U-Boot prompt. The device table is mostly taken from the postmarketOS wiki article (https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500). All the newly added devices were tested by Linus Walleij. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-17doc: move doc/board/st/st.rstHeinrich Schuchardt
'make htmldocs' does not use file doc/board/st/st.rst because the name matches the directory name. Let's rename it to st-dt.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: rename Freescale to NXPHeinrich Schuchardt
Freescale Semiconductor, Inc. was merged into NXP Semiconductors in 2015. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: move i.MX7D/i.MX8MM A/B booting to board specificHeinrich Schuchardt
Having "i.MX7D/i.MX8MM SRC_GPR10 PERSIST_SECONDARY_BOOT for bootloader A/B switching" at the top level of the documentation tree does not make sense. Move it to board specific information. Fixes: 59e3d1bd4992 ("doc: imx: psb: Document usage of SRC_GPR10 PERSIST_SECONDARY_BOOT for A/B switching") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-16doc: st: stm32mp1: Add FIP support for trusted bootPatrick Delaunay
TF-A for STM32MP15 now supports the FIP: it is a packaging format which includes the secure monitor, u-boot-nodtb.bin and u-boot.dtb This FIP file is loaded by FSBL = TF-A BL2. This patch updates the board documentation to use this FIP file and no more u-boot.stm32 (with STM32 image header) which is no more generated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-14doc: stm32mp1: add page for device tree bindingsPatrick Delaunay
With device tree binding migration to yaml it is difficult to synchronize the binding from Linux kernel to U-Boot. Instead of maintaining the same dt bindings, this patch adds in the U-Boot documentation the path to the device tree bindings in Linux kernel for STMicroelectronics devices, when they are used without modification. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Add links for referenced text files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-09Merge tag 'u-boot-imx-20210809' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09board: colibri-imx8x: update building documentationOleksandr Suvorov
Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-06ppc: Drop t4qds and b4860qds referencesSimon Glass
These boards have been removed. Drop the config file and other references. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01doc: add missing board/ti/index.rstHeinrich Schuchardt
Commit 8baeeecbe305 ("doc: board: Move j721e document to doc/board/ti/ directory") introduced 'make htmldocs' build errors due to a missing file board/ti/index.rst. Fixes: 8baeeecbe305 ("doc: board: Move j721e document to doc/board/ti/ directory") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-01doc: riscv: flashing SiFive boardsHeinrich Schuchardt
We should not use /dev/sda and /dev/sdb in our examples. Users might inadvertently mess up their workstation. Use /dev/sdX instead. Remove console output like '# ' and '> ' which makes copying hard. Set example language to bash for correct syntax-highlighting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> iewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-27doc: board: j721e_evm: Add documentation for firmware loadingKishon Vijay Abraham I
Add documentation for loading firmwares to be used by remote cores in the system including the environment variables that has to be set to load the firmwares. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-21-kishon@ti.com
2021-07-27doc: board: Move j721e document to doc/board/ti/ directoryKishon Vijay Abraham I
Move j721e document from board/ti/j721e/README to doc/board/ti/j721e_evm.rst after converting it to RST format. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
2021-07-24Merge tag 'efi-2021-10-rc1-3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc1-3 Documentation: provide Makefile documentation SMBIOS: generate BIOS release date based on UEFI version improve error handling in SMBIOS table generation UEFI: correct handling of signed capsule if authentication if off
2021-07-24doc: fix board/openpiton/riscv64.rstHeinrich Schuchardt
* remove duplicate heading to avoid build error with 'make htmldocs' * length of underlines must match header * use appropriate header levels * fix type %s/linux/Linux/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24doc: remove qemu_capsule_update from indexHeinrich Schuchardt
Commit 316ab801c0d9 ("doc: Update CapsuleUpdate READMEs") deleted file doc/board/emulation/qemu_capsule_update.rst. Update the index. this avoids doc/board/emulation/index.rst:6: WARNING: toctree contains reference to nonexisting document 'board/emulation/qemu_capsule_update' Fixes: 316ab801c0d9 ("doc: Update CapsuleUpdate READMEs") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-23board: dragonboard410c: Load U-Boot directly without LKStephan Gerhold
At the moment the U-Boot port for the DragonBoard 410c is designed to be loaded as an Android boot image after Qualcomm's Little Kernel (LK) bootloader. This is simple to set up but LK is redundant in this case, since everything done by LK can be also done directly by U-Boot. Dropping LK entirely has at least the following advantages: - Easier installation/board code (no need for Android boot images) - (Slightly) faster boot - Boot directly in 64-bit without a round trip to 32-bit for LK So far this was not possible yet because of unsolved problems: 1. Signing tool: The firmware expects a "signed" ELF image with extra (Qualcomm-specific) ELF headers, usually used for secure boot. The DragonBoard 410c does not have secure boot by default but the extra ELF headers are still required. 2. PSCI bug: There seems to be a bug in the PSCI implementation (part of the TrustZone/tz firmware) that causes all other CPU cores to be started in 32-bit mode if LK is missing in the boot chain. This causes Linux to hang early during boot. There is a solution for both problems now: 1. qtestsign (https://github.com/msm8916-mainline/qtestsign) can be used as a "signing" tool for U-Boot and other firmware. 2. A workaround for the "PSCI bug" is to execute the TZ syscall when entering U-Boot. That way PSCI is made aware of the 64-bit switch and starts all other CPU cores in 64-bit mode as well. Simplify the dragonboard410c board by removing all the extra code that is only used to build an Android boot image that can be loaded by LK. This allows dropping the custom linker script, special image magic, as well as most of the special build/installation instructions. CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot and the appended DTB combined. The resulting u-boot.elf can then be passed to the "signing" tool (e.g. qtestsign). The PSCI workaround is placed in the "boot0" hook that is enabled with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows compatibility with custom firmware that enters U-Boot in EL2 or EL3, e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub). As a first step these changes apply only to DragonBoard410c. Similar changes could likely also work for the DragonBoard 820c. Note that removing LK wouldn't be possible that easily without a lot of work already done three years ago by Ramon Fried. A lot of missing initialization, pinctrl etc was already added back then even though it was not strictly needed yet. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-18doc: Update CapsuleUpdate READMEsIlias Apalodimas
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-15x86: coreboot: Document the memory mapSimon Glass
Add information about memory usage when U-Boot is started from coreboot. This is useful when debugging. Also, since coreboot takes a chunk of memory in the middle of SDRAM for use by PCI devices, it can help avoid overwriting this with a loaded kernel by accident. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-06Merge branch '2021-07-06-platform-updates'Tom Rini
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06doc: qemu: arm64: Fix the documentation of capsule updateMasami Hiramatsu
Since the EDK2 GenerateCapsule script is out of date and it doesn't generate the supported version capsule file, the document should refer the mkeficapsule in tools. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: riscv: add openpiton-riscv64 SoC supportTianrui Wei
This patch adds openpiton-riscv64 SOC support. In particular, this board supports a standard bootflow through zsbl->u-boot SPL-> opensbi->u-boot proper->Linux. There are separate defconfigs for building u-boot SPL and u-boot proper Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-17Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- ae350 related dts fixes.
2021-06-17riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INITBin Meng
The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while actually it is not. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-06-09imx: support for conga-QMX8 boardOliver Graute
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-05-31board: sifive: add HiFive Unmatched board supportGreen Wan
Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-25doc: update and fix Qemu MIPS documentationDaniel Schwierzeck
Update description to use the MIPS Malta board for Qemu. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-17riscv: ax25-ae350: doc: Fix minor format issuesBin Meng
This fixes two minor format issues of the ax25-ae350 reST file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-04-19boards: amlogic: update documentation for PCIe supportNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-17board: toradex: apalis-imx8x: fix build warningHeinrich Schuchardt
The length of an underline must match the length of the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-15doc: board: qemu-ppce500: Document eTSEC usageBin Meng
Document how to launch a QEMU session with eTSEC as a network device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-09Merge tag 'u-boot-imx-20210409' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210409 ------------------- - Secure Boot : - HAB for MX8M / MX7ULP - CAAM fixes - Fixes for imxrt1020 - Fixes for USDHC driver - Fixes for Toradex (Colibri / Apalis) - Switch to DM for several boards - mx23 olinuxo - usbarmory - marsboard / riotboard - Gateworks GW Ventana - NXP upstream patches (LPDDR / CAAM / HAB) CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
2021-04-08board: toradex: apalis-imx8x: fix build instructionsOleksandr Suvorov
Fix an URL for downloading the SCFW binary for an Apalis iMX8X and improve u-boot image build instructions. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-08doc: imx8mp-evk: update after using binmanPeng Fan
update doc after using binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08doc: imx8mn_evk: update doc after using binmanPeng Fan
Update doc after using binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08doc: imx8mm_evk: update doc after using binmanPeng Fan
Update doc after switch to binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08riscv: sifive: Rename fu540 board to unleashedBin Meng
In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-03-30board: dts: rockchip: Add NanoPi M4BAlexandre Vicenzi
Add initial support for NanoPi M4B, a minor revision of the original NanoPi M4. Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4: "arm64: dts: rockchip: Add NanoPi M4B board" (sha1: c7b03115003f7f337ab165542cee37148cf30a8a) Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com> Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 00:00:29 +0000