aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2021-10-07ARM: amlogic: add Banana Pi M5Neil Armstrong
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: meson: add Beelink GS-King X boardNeil Armstrong
The Beelink GS-King X is a variant of the GS King boards but with an internal USB to SATA bridge and advanced audio features. [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07doc: boards: amlogic: update for Odroid HC4Neil Armstrong
Add documentation bits for the Odroid-HC4. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-06Convert CONFIG_NAND_OMAP_ECCSCHEME to KconfigTom Rini
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we will use be a choice statement, enumerating the ones which we have implemented. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06acpi: Use U-Boot version for OEM_REVISIONPali Rohár
OEM_REVISION is 32-bit unsigned number. It should be increased only when changing software version. Therefore it should not depend on build time. Change calculation to use U-Boot version numbers and set this revision to date number. Prior this change OEM_REVISION was calculated from build date and stored in the same format. After this change macro U_BOOT_BUILD_DATE is not used in other files so remove it from global autogenerated files and also from Makefile. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-05doc: test: Explain how to run pytests in parallelSimon Glass
Add documentation for this so people can try it out. At present it does not fully work. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-10-01arm: Remove zmx25 board and ARCH_MX25Tom Rini
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01doc/kwboot.1: Update man pageMarek Behún
Update man page for the kwboot utility. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-29Merge branch 'network_master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-28net: replace the "xfi" phy-mode with "10gbase-r"Vladimir Oltean
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28doc: Add mention of the /config bindingSimon Glass
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-27doc: ti: am335x_evm: Minor general updatesTom Rini
- At this point there are a large number of Beaglebone boards, refer to them as a family rather than a growing list. - Reword customization as we're largely Kconfig-oriented now. - Remove the NOR section as the relevant defconfigs have long been removed and the general support was not updated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27doc: ti: Convert am335x_evm README to rSTTom Rini
Convert the existing documentation to rST, keeping to just making formatting changes to start with. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Merge tag 'dm-pull-next-27sep21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm into next Various of-platdata improvements, including CONFIG_OF_REAL
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-25dm: doc: Add a note about of-platdata header filesSimon Glass
This error can be confusing so mention it specifically in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Try to avoid the preprocessor with OF_REALSimon Glass
Convert some of these occurences to C code, where it is easy to do. This should help encourage this approach to be used in new code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Use OF_REAL instead of !OF_PLATDATASimon Glass
Now that we have a 'positive' Kconfig option, use this instead of the negative one, which is harder to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...Simon Glass
The current API is outdated as it requires a devicetree pointer. Move these functions to use the ofnode API and update this globally. Add some tests while we are here. Correct the call in exynos_dsim_config_parse_dt() which is obviously wrong. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25doc: Add mention of the /config bindingSimon Glass
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-24drivers: tpm2: update reset gpio semanticsJorge Ramirez-Ortiz
Use the more generic reset-gpios property name. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-18Revert "doc: Update CapsuleUpdate READMEs"Simon Glass
This reverts commit 316ab801c0d91c02b21b8be1e3db7e69555364e9. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-17version: Remove global macro U_BOOT_VERSION_STRING from version.hPali Rohár
Version string is available in global variable char version_string[]. Macro U_BOOT_VERSION_STRING is not used by any other file, so remove it completely from version.h. Other files were already converted to use variable version_string[]. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-16dtoc: Further improve documentation about warningsSimon Glass
Split this information into subsections and expand it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Support using mmc command for enumerating mmc card in a given mode Fix device_remove in mmc Fix switch issue with send_status disabled Drop 1ms delay in fsl_esdhc command sending Revert "mmc: sdhci: set to INT_DATA_END when there are data"
2021-09-12Merge tag 'efi-2021-10-rc4-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc4-2 Documentation: * improve documentation of U-Boot for /config DT node * integrate bloblist documentation UEFI: * correct usage of EFI_CALL() * code tidy up
2021-09-11doc: Complete the list of available runtime-config optionsSimon Glass
The current list is missing a few items. Add them. Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11doc: Tidy up the bindings for the config/ nodeSimon Glass
Sort these and add a type so it is clear how to set the value. Add a note about usage to the top. Correct the 'no-keyboard' binding which is missing a prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11bloblist: Move to rST formatSimon Glass
Move this documentation to the new format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-10doc: usage: mmc: Document usage of speed mode in "mmc dev" and "mmc rescan"Aswath Govindraju
Add documentation on the usage of "mmc dev" and "mmc rescan" commands to set user defined speed modes. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-09MAINTAINERS: Update ARM TI entryLokesh Vutla
Move TI maintainership to Tom. Updated with the following commands: find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Tom Rini <trini@konsulko.com>
2021-09-04net: Rename SPL_NET_SUPPORT to SPL_NETSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04spi: Rename SPI_SUPPORT to SPISimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03Revert most of the series for adding vexpress_aemv8r supportTom Rini
Per a request from Andre Przywara and agreed with by Peter Hoyes, the vexpress aemv8r support wasn't quite ready to be merged, but the discussion had moved off list. We should keep the first patch in the series for now, but revert the rest. This reverts the following commits: e0bd6f31ce41 doc: Add documentation for the Arm vexpress board configs 30e5a449e8c7 arm: Use armv8_switch_to_el1 env to switch to EL1 b53bbca63bf4 vexpress64: Add BASER_FVP vexpress board variant 2f5b7b74903f armv8: Add ARMv8 MPU configuration logic 37a757e227cc armv8: Ensure EL1&0 VMSA is enabled Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03doc: Remove information about CAPSULE_FMP_HEADERMichal Simek
This Kconfig symbol was never added to U-Boot but it was mentioned in the origin commit c35df7c9e43e ("qemu: arm64: Add documentation for capsule update"). That's why remove it from documentation to be accurate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-02doc: Add documentation for the Arm vexpress board configsPeter Hoyes
Create a new documentation section for Arm Ltd boards with a sub-page for the vexpress board (FVP-A, FVP-R and Juno). Document how the armv8_switch_to_el1 environment variable can be used to switch between booting from S-EL2/S-EL1 at runtime on the BASER_FVP. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02vexpress64: Add BASER_FVP vexpress board variantPeter Hoyes
The BASER_FVP board variant is implemented on top of the BASE_FVP board config (which, in turn, is based on the Juno Versatile Express board config). They all share a similar memory map - for BASER_FVP the map is inverted from the BASE_FVP (https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map) * Create new TARGET_VEXPRESS64_BASER_FVP target, which uses the same board config as BASE_FVP and JUNO * Adapt vexpress_aemv8a.h header file to support BASER_FVP (and rename to vexpress_aemv8.h) * Enable config to switch to EL1 for the BASER_FVP * Create vexpress_aemv8r defconfig * Provide an MPU memory map for the BASER_FVP For now, only single core boot is supported. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [trini: Add MAINTAINERS, move BOOTCOMMAND to defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01board: stemmy: Update documentationStephan Gerhold
Over the time, the "stemmy" U-Boot board was tested on several other Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the documentation to reStructuredText at doc/board/ste/stemmy.rst and make the device list complete. Also note that the board now boots into USB Fastboot instead of just ending up at the U-Boot prompt. The device table is mostly taken from the postmarketOS wiki article (https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500). All the newly added devices were tested by Linus Walleij. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01scripts/checkpatch.pl: Resync with v5.13Tom Rini
This resyncs us with the version found in v5.13 of the Linux kernel with the following exceptions: - Keep our u-boot specific tests / code area. - Change the location of checkpatch.rst (which we now import) - Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now. - Keep debug/printf in the list for $logFunctions And note that we now also include the spdxcheck.py tool that checkpatch.pl supports calling out to, and include upstream's checkpatch.rst in our develop section of the documentation. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Merge branch 'next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next - Handling all DM watchdogs in watchdog_reset() (Rasmus)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 17:11:31 +0000